Abramovich H, Singer J, Weller T, “Repeated buckling and its influence on the geometrical imperfections of stiffened cylindrical shells under combined loading”, International Journal of Nonlinear Mechanics, 2002, 37, 577-588.
Aghajari S, Showkati H, Abedi K, “Experimental Investigation on the buckling of Thin Cylindrical Shells with Two-Stepwise Variable Thickness under External Pressure”, Journal of Structural Engineering and Mechanics, 2011, 39 (6), 849-860.
Brush DO, Almorth BO, “Buckling of Bears, Plates and Shells”, Mc Grow Hill, New York, 1975.
Cao G, Chen Z, Yang L, Fan H, Zhou F, “Analytical study on the buckling of cylindrical shells with arbitrary thickness imperfections under axial compression”, Journal of pressure vessel technology, 2015, 137, 1-9.
Ding X, MColernan R, Rotter JM, “Technique for Precise Measurement of Large-Scale Silos and Tanks”, Journal of Surveying Engineering, 1996, 122 (1), 15-25.
Dowling P, Hardnig JE , Agelidis N, Fahy W, “Buckling of orthogonally stiffened cylindrical shell used in offshore engineering”, Proceeding Colloquium, University of Stuttgart, Germany, 1982, 239-274.
Evkin A, Kolesnikov M, Prikazchikov DA, “Buckling of a spherical shell under external pressure and inward concentrated load”, Journal of Mathematics and Mechanics. Solids, 2016, 1, 1-13.
Farshad M, “Stability of Structures”, 2nd ed, Mc Grow Hill, New York, 1983.
Fatemi SM, Showkati H, Maali M, “Experiments on Imperfect Cylindrical Shells under Uniform External Pressure”, Journal of Thin-Walled Structures, 2013, 65, 14-25.
Ghazijahani T.G, Jiao H, Holloway D, “Experiments on dented cylindrical shells under peripheral pressure”, Journal of Thin-Walled Structures, 2014, 84, 14-25.
Golzan BS, Showkati H, “Buckling of Thin-walled Conical Shells under Uniform External Pressure”, Journal of Thin-Walled Structures, 2008, 46 (5), 516-529.
Hornung U, Saal H, “Buckling Loads of Tank Shells with Imperfection”, International Journal of Nonlinear Mechanics, 2002, 37, 605-621.
Hutchinson JW, Thompson JMT, “Nonlinear buckling behavior of spherical shells: barriers and symmetry-breaking dimples”, Journal of Philos Mathematical, Physical, and Engineering Sciences, 2017, 375, 82-93.
Maraveas C, Balokas GA, Tsavdaridis KD, “Numerical evaluation on shell buckling of empty thin-walled steel tanks under wind load according to current American and European design codes”, Journal of Thin-Walled Structures, 2015, 95, 152-160.
Paor C, Kelliher D, Cronin KWM, Wright DS, Mc Sweeney G, “Prediction of vacuum-induced buckling pressures of thin-walled cylinders”, Journal of Thin-Walled Structures, 2012, 55, 1-10.
Pircher M, Berry PA, Ding X, Bridge RQ, “The shape of circumferential weld-induced imperfections in thin-walled steel silos and tanks”, Journal of Thin-Walled Structures, 2001, 39, 999-1014.
Schneider W, Brede A, “Consistent Equivalent Geometric Imperfection for the Numerical Buckling Strength Verification of Cylindrical Shells under Uniform External Pressure”, Journal of Thin-Walled Structures, 2005, 43, 175-188.
Shen HSh, Chen TY, “Buckling and Post Buckling Behavior of Cylindrical Shell under Combined External Pressure and Axial Compression”, Journal of Thin-Walled Structures, 1991, 12, 321-334.
Showkati H, Ansourian H, “Influence of Primary Boundary Condition on the Buckling of Shallow Cylindrical Shells”, Constructional Steel Research, 1995, 36 (1), 53-75.
Vinson JR, “The Behavior of Thin-Walled Structures: Beams, Plates and Shells”, Kluwer Academic Publisher, Mechanics of Surface Structures, 8, 1998.
)