تاثیر محصورسازی در لایه ماسه و ایجاد خمیدگی انتهایی بر بهبود مقاومت بیرون کشش تسمه پلیمری در رس

نوع مقاله : مقاله کامل پژوهشی

نویسندگان

دانشکده مهندسی عمران و محیط زیست، دانشگاه صنعتی شیراز، شیراز، ایران

10.22034/ceej.2025.64913.2403

چکیده

طراحی و ساخت دیوارهای حائل خاک مسلح با توجه به ویژگی‌های ژئوتکنیکی مناسب و مقرون به‌صرفه‌ بودن، در سال‌های اخیر مورد توجه مهندسان و پژوهشگران قرار گرفته است. تسلیح خاک با استفاده از تسمه پلیمری روشی ساده، مؤثر و ارزان برای بهبود رفتارهای مقاومتی و تغییرشکلی دیوارهای حائل خاک مسلح می‌باشد. در این پژوهش به منظور افزایش مقاومت بیرون کشش تسمه‌های پلیمری در خاک رس از ترکیب دو راهکار محصورسازی تسمه پلیمری در لایه نازکی از ماسه و ایجاد ناحیه‌ای خمیده در انتهای تسمه استفاده شده است. آزمایش‌های بیرون کشش بزرگ مقیاس تحت فشارهای سربار مختلف برای تسمه ساده و تسمه با انتهای خمیده (U-شکل) انجام شده و مقاومت بیرون کشش تسمه U-شکل با مقاومت بیرون کشش تسمه ساده در ماسه و همچنین در خاک رس مقایسه شده است. سپس تاثیر محصورسازی تسمه U-شکل در لایه‌های نازکی از ماسه با ضخامت‌های مختلف، در محیط رسی بررسی گردیده است. نتایج نشان داد که ایجاد خمیدگی U-شکل در انتهای تسمه که همراه با افزایش 30% در طول تسمه مصرفی است، مقاومت بیرون کشش را نسبت به تسمه ساده بیش از سه برابر افزایش می‌دهد. همچنین محصورسازی تسمه U-شکل در لایه نازک ماسه، مقاومت بیرون کشش را تا حدود پنج برابر نسبت به تسمه ساده در خاک رسی افزایش می‌دهد.

کلیدواژه‌ها

موضوعات


عنوان مقاله [English]

The effect of encapsulation in sand layer and application of end-bend on pullout resistance enhancement of polymeric strap in clay

نویسندگان [English]

  • Maziar Gholami Shooli
  • Seyed Mohammad Binesh
  • Piltan Tabatabaie Shourijeh
Civil and Environmental Engineering Department, Shiraz University of Technology, Shiraz, Iran
چکیده [English]

The design and construction of reinforced soil retaining walls have recently attracted considerable interest from engineers and researchers, owing to their favorable geotechnical properties and cost-effectiveness. Using polymeric straps for soil reinforcement provides a straightforward and economical approach to enhance the strength and deformation characteristics of earth retaining walls. This research investigates methods to improve the pullout resistance of polymer straps in clay by employing two techniques: encasing the reinforcement in a thin layer of granular soil (i.e., sandwich method) and creating a U-shaped end-bend. The pullout behavior of straps with both direct and U-shaped ends was analyzed in sand and clay backfills through a series of large-scale pullout tests. Additionally, the study examines how the sandwich method affects the pullout resistance of U-shaped polymeric straps. The results demonstrated that incorporating a U-shaped bend at the strap's end, which increases its length by 30%, enhances pullout strength by over three times compared to straps with direct ends. Moreover, encasing the U-shaped strap in a thin layer of sand can increase pullout strength by up to five times compared to direct-end straps in clay soil.

کلیدواژه‌ها [English]

  • Soil Improvement
  • Sand
  • Clay
  • Polymeric Strap
  • Pullout Test