ASTM, C128-15, Standard test method for relative density (specific gravity) and absorption of coarse aggregate, ASTM West Conshohocken, PA, 2015.
Astm, C127-15, Standard test method for relative density (specific gravity) and absorption of fine aggregate, ASTM Current Edition Approved Jan, 1, 2015.
Astm, C136-19, Standard test method for sieve analysis of fine and coarse aggregates. ASTM C136-06, 2019.
ASTM C666/C666M-22, Standard test method for resistance of concrete to rapid freezing and thawing, ASTM International, West Conshohocken, PA, 2022.
ASTM C1679-18, Standard practice for measuring hydration kinetics of hydraulic cementitious mixtures using isothermal calorimetry, ASTM International, West Conshohocken, PA, 2018.
An M, Wang Y, Yu Z, “Damage mechanisms of ultra-high-performance concrete under freeze-thaw cycling in salt solution considering the effect of rehydration”, Construction and Building Materials, 2019, 198, 546-552. https://doi.org/10.1016/j.conbuildmat.2018.11.175
Bernabé Y, Olson JF, “The hydraulic conductance of a capillary with a sinusoidally varying cross‐section”, Geophysical Research Letters, 2000, 27 (2), 245-248. https://doi.org/10.1029/1999GL010842
Cheng Y, Shi Z, “Experimental study on nano-SiO 2 improving concrete durability of bridge deck pavement in cold regions”, Advances in Civil Engineering, 2019. https://doi.org/10.1155/2019/5284913
Choinska M, Khelidj A, Chatzigeorgiou G, Pijaudier-Cabot G, “Effects and interactions of temperature and stress-level related damage on permeability of concrete”, Cement and Concrete Research, 2007, 37 (1), 79-88. https://doi.org/10.1016/j.cemconres.2006.09.015
Chen X, Zhou J, Ding N, “Fractal characterization of pore system evolution in cementitious materials”, KSCE Journal of Civil Engineering, 2015, 19, 719-724. https://doi.org/10.1007/s12205-013-0320-2
Chen Y, Xu YF, “Compressive strength of fractal-textured foamed concrete. Fractals, 2019, 27 (01), 1940003. https://doi.org/10.1142/S0218348X19400036
Cook RA, Hover KC, “Mercury porosimetry of cement-based materials and associated correction factors”, Construction and Building Materials, 1993, 7 (4), 231-240. https://doi.org/10.1016/0950-0618(93)90007-Y
Corte AE, “Vertical migration of particles in front of a moving freezing plane”, Journal of Geophysical Research, 1962, 67 (3),1085-1090. https://doi.org/10.1029/JZ067i003p01085
EN B, 12390-8, “Testing hardened concrete. Depth of penetration of water under pressure”, BSI, London, 2009.
Gardner DR, Lark RJ, Barr B, “Effect of conditioning temperature on the strength and permeability of normal-and high-strength concrete”, Cement and concrete research, 2005, 35 (7), 1400-1406. https://doi.org/10.1016/j.cemconres.2004.08.012
Gao Y, Jiang J, De Schutter G, Ye G, Sun W, “Fractal and multifractal analysis on pore structure in cement paste. Construcion and Building Materials, 2014, 69,253-261. https://doi.org/10.1016/j.conbuildmat.2014.07.065
Hanjari KZ, Kettil P, Lundgren K, “Modelling the structural behaviour of frost-damaged reinforced concrete structures”, Structure and Infrastructure Engineering, 2013, 9 (5), 416-431. https://doi.org/10.1080/15732479.2011.552916
Han X, Wang B, Feng J, “Relationship between fractal feature and compressive strength of concrete based on MIP”, Construction and Building Materials, 2022, 322, 126504. https://doi.org/10.1016/j.conbuildmat.2022.126504
Huang M, Dong Q, Ni F, Wang L, “LCA and LCCA based multi-objective optimization of pavement maintenance”, Journal of Cleaner Production, 2021, 283, 124583. https://doi.org/10.1016/j.jclepro.2020.124583
Indelicato F, “On the correlation between porosity and strength in high-alumina cement mortars”, Materials and Structures, 1990, 23, 289-295. https://doi.org/10.1007/BF02472202
Kim J, Choi S, “Fractal-based microstructure reconstruction to predict the permeability of cement pastes”, Construction and Building Materials, 2023, 366, 130157. https://doi.org/10.1016/j.conbuildmat.2022.130157
Liu H, Xie Z, Yu R, Zhang N, “A new three-dimensional fractal dimension model to describe the complexity of concrete pores”, Journal of Advanced Concrete Technology, 2022, 20 (3), 127-138. https://doi.org/10.3151/jact.20.127
Mahamud M, López Ó, Pis JJ, Pajares JA, “Textural characterization of chars using fractal analysis, Fuel Processing Technology, 2004, 86 (2), 135-149. https://doi.org/10.1016/j.fuproc.2004.01.001
Ma H, Sun J, Wu C, Yi C, Li Y, “Study on the pore and microstructure fractal characteristics of alkali-activated coal gangue-slag mortars”, Materials, 2020, 13 (11), 2442. https://doi.org/10.3390/ma13112442
Mandelbrot BB, Mandelbrot BB, “The fractal geometry of nature (Vol. 1, pp. 25-74)”, New York: WH freeman, 1982. https://doi.org/10.1080/00029890.1984.11971507
Naderi M, Kaboudan A, “Experimental study of the effect of aggregate type on concrete strength and permeability”, Journal of Building Engineering, 2021, 37, 101928. https://doi.org/10.1016/j.jobe.2020.101928
Naderi M, Kaboudan A, “Cylindrical Chamber: A new in situ method for measuring permeability of concrete with and without admixtures”, Journal of Testing and Evaluation, 2020, 48 (3), 2225-2241. https://doi.org/10.1520/JTE20190578
Naderi M, “Friction-transfer test for the assessment of in situ strength and adhesion of cementitious materials”, Construction and Building Materials, 2005, 19 (6), 454-459. https://doi.org/10.1016/j.conbuildmat.2004.07.018
Naderi M, Varzaneh AS, “Curing and Shrinkage Effect on the PMM/Concrete Bond, using Friction-transfer and Pull-off Methods”, Journal of Ferdowsi Civil Engineering, 2020, 33 (1). 10.22067/civil.v1i33.82639
Naderi M, “Determination of concrete, stone, mortar, brick and other construction materials permeability with cylindrical chamber method”, Registration of Patent in Companies and Industrial Property Office, Registration Number 67726, 2010.
Naderi M, Kaboudan A, Akhavan Sadighi A, “Comparative study on water permeability of concrete using cylindrical chamber method and British standard and its relation with compressive strength”, Journal of Rehabilitation in Civil Engineering, 2018, 6 (1), 116-131. http://civiljournal.semnan.ac.ir/
Özcan F, Koç ME, “Influence of ground pumice on compressive strength and air content of both non-air and air entrained concrete in fresh and hardened state”, Construction and Building Materials, 2018, 187, 382-393. https://doi.org/10.1016/j.conbuildmat.2018.07.183
Patro D, Bhattacharyya S, Jayaram V, “Flow kinetics in porous ceramics: understanding with non‐uniform capillary models”, Journal of the American Ceramic Society, 2007, 90 (10), 3040-3046. https://doi.org/10.1111/j.1551-2916.2007.01776.x
Powers TC, Helmuth RA, “Theory of volume changes in hardened portland-cement paste during freezing”, In Highway research board proceedings, 1953, (Vol. 32). https://onlinepubs.trb.org/Onlinepubs/hrbproceedings/32/32-019.pdf
Powers TC, Willis TF, “The air requirement of frost-resistant concrete”, 1949.
Powers TC, “January. A working hypothesis for further studies of frost resistance of concrete”, In Journal Proceedings, 1945, 41 (1), 245-272. https://doi.org/10.14359/8684
Standard B, “Testing hardened concrete”, Compressive Strength of Test Specimens, BS EN, 2009, 12390-3.
Shen L, Zhang L, Yang X, Di Luzio G, Xu L, Wang H, Cao M, “Multiscale cracking pattern-based homogenization model of water permeability in hybrid fiber-reinforced concrete after high-temperature exposure”, Journal of Building Engineering, 2024, 84, 108643. https://doi.org/10.1016/j.jobe.2024.108643
Shi C, “Effect of mixing proportions of concrete on its electrical conductivity and the rapid chloride permeability test (ASTM C1202 or ASSHTO T277) results”, Cement and concrete research, 2004, 34 (3), 537-545. https://doi.org/10.1016/j.cemconres.2003.09.007
Singh LP, Goel A, Bhattacharyya SK, Sharma U, Mishra G, “Hydration studies of cementitious material using silica nanoparticles”, Journal of Advanced Concrete Technology, 2015, 13 (7), 345-354. https://doi.org/10.3151/jact.13.345
Torrent RJ, Neves RD, Imamoto KI, “Concrete permeability and durability performance: from theory to field applications”, CRC Press, 2021. https://doi.org/10.1201/9780429505652
Valenza II JJ, Scherer GW, “A review of salt scaling: II. Mechanisms”, Cement and Concrete Research, 2007, 37 (7), 1022-1034. https://doi.org/10.1016/j.cemconres.2007.03.003
Wei J, Chen Z, Liu J, Liang J, Shi C, “Review on the characteristics and multi-factor model between pore structure with compressive strength of coral aggregate”, Construction and Building Materials, 2023, 370, 130326. https://doi.org/10.1016/j.conbuildmat.2023.130326
Wheatcraft SW, Tyler SW, “An explanation of scale‐dependent dispersivity in heterogeneous aquifers using concepts of fractal geometry”, Water Resources Research, 1988, 24 (4), 566-578. https://doi.org/10.1029/WR024i004p00566
Xuan W, Chen X, Yang G, Dai F, Chen Y, “Impact behavior and microstructure of cement mortar incorporating waste carpet fibers after exposure to high temperatures”, Journal of Cleaner Production, 2018, 187, 222-236. Impact behavior and microstructure of cement mortar incorporating waste carpet fibers after exposure to high temperatures
Xue G, Zhu H, Xu S, Dong W, “Fatigue performance and fatigue equation of crumb rubber concrete under freeze–thaw cycles”, International Journal of Fatigue, 2023, 168, 107456. https://doi.org/10.1016/j.ijfatigue.2022.107456
Xu P, “A discussion on fractal models for transport physics of porous media”, Fractals, 2015, 23 (03), 1530001. https://doi.org/10.1142/S0218348X15300019
Yang J, Dong Q, Chen X, Shi B, Wang X, “Evaluation of concrete surface permeability: A dynamic water film-based approach”, Measurement, 2024, 224, 113863. https://doi.org/10.1016/j.measurement.2023.113863
Yuan J, Du Z, Wu Y, Xiao F, “Freezing-thawing resistance evaluations of concrete pavements with deicing salts based on various surfaces and air void parameters”, Construction and Building Materials, 2019, 204, 317-326. https://doi.org/10.1016/j.conbuildmat.2019.01.149
Yu, B. and Cheng, P., 2002. A fractal permeability model for bi-dispersed porous media. International journal of heat and mass transfer, 45(14), pp.2983-2993. https://doi.org/10.1016/S0017-9310(02)00014-5
Yu B, Li J, “Some fractal characters of porous media”, Fractals, 2001, 9 (03), 365-372. https://doi.org/10.1142/S0218348X01000804
Yıldırım M, Özhan HB, “Effect of permeability-reducing admixtures on concrete properties at different cement dosages”, Journal of Innovative Science and Engineering, 2023, 7 (1), 48-59. https://doi.org/10.38088/jise.1174927
Zhang B, Li S, “Determination of the surface fractal dimension for porous media by mercury porosimetry”, Industrial & Engineering Chemistry Research, 1995, 34 (4), 1383-1386. https://doi.org/10.1021/ie00043a044
Zhang G, Zheng H, Wei X, Li Z, Yan Z, Chen X, “Concrete mechanical properties and pore structure influenced by high permeability water pressure”, Developments in the Built Environment, 2024, 100385. https://doi.org/10.1016/j.dibe.2024.100385
Zhang J, Zhou L, Nie Q, Wu H, Wu L, “Effects of calcium sulfate whiskers and basalt fiber on gas permeability and microstructure of concrete”, Construction and Building Materials, 2024, 411, 134369. https://doi.org/10.1016/j.conbuildmat.2023.134369
Zhang M, Yang LM, Guo JJ, Liu WL, Chen HL, “Mechanical properties and service life prediction of modified concrete attacked by sulfate corrosion”, Advances in Civil Engineering, 2018, 1-7. https://doi.org/10.1155/2018/8907363
Zeng Q, Li K, Fen-chong T, Dangla P, “June. A study of the behaviors of cement-based materials subject to freezing”, In 2010 International Conference on Mechanic Automation and Control Engineering, IEEE, 2010, 1611-1616. https://doi.org/10.1109/MACE.2010.5535987
Zeng W, Wang W, Pan J, Liu G, “Effect of steel fiber on the permeability of freeze-thaw damaged concrete under splitting tensile and compressive loads”, Journal of Building Engineering, 2023, 80, 108086. https://doi.org/10.1016/j.jobe.2023.108086
Zeng W, Zhao X, Zou B, Chen C, “Topographical characterization and permeability correlation of steel fiber reinforced concrete surface under freeze-thaw cycles and NaCl solution immersion”, https://doi.org/10.1016/j.jobe.2023.108042 Journal of Building Engineering, 2023, 80, 108042.