Improvement of Tabriz Green Marl Using Alkaline Activated Zeolite and Metaclay

Authors

Faculty of Civil Engineering, Islamic Azad University, Tabriz Branch, Tabriz, Iran

Abstract

Marl or marl clays are named for carbonated soils with the amount of carbonate in varying proportions from 20 to 55% (Elert et al., 2017). Marls are one of the most important problematic soils that not only the problem of volume changes but also their bearing capacity is lower than coarse-grained beds, so not meet the load-bearing goals of engineering structures. Different improvement methods are proposed to improve the engineering characteristics of problematic soils, the most common is using of lime for this purpose in clayey soils (Al-Mukhtar et al., 2012 and Obuzor et al., 2012) But this substance is less effective in marls (Ghobadi et al., 2014 and Ureña et al., 2015). According to the history of soil modification, the geopolymerization method can be introduced as the third generation of cementation methods after lime and cement (Li et al., 2010). Geopolymers are alkaline activated bonds with low calcium and medium to high aluminum produced by the reaction between alkaline hydroxide solution and materials containing alumina silicate (Provis et al., 2009 and Yung-Ming et al., 2016).
The purpose of this research is using the geopolymerization technique to stabilize Tabriz carbonate clay with the approach of controlling deformations and increasing strength. To achieve this outcome, laboratory studies have been carried out on Tabriz green marl with alkali activated zeolite and metaclay as sources of alumina silicate to form cemented bonds. The alkali activator used in this study is sodium hydroxide with different concentrations to achieve optimal results. For this purpose, multiple tests of uniaxial compressive strength have been used to evaluate the strength of stabilized soil. The effective parameters studied in the current research can be referred to the weight percentages of materials containing alumina silicate (zeolite and metaclay), curing time and molarity of the alkaline solution (NaOH).

Keywords

Main Subjects


ماهوتی ا، کاتبی ه، "طبقه­ بندی خاک­ های کربناته از دیدگاه مهندسی ژئوتکنیک (مطالعه موردی: خاک مارن ­دار شهر تبریز)"، نشریه مهندسی عمران و محیط زیست دانشگاه تبریز، 1397، 48 (3)، 61-73.
https://doi.org/10.22034/CEEJ.2018.8240
Abdullah HH, Shahin MA, Sarker P, “Use of fly-ash geopolymer incorporating ground granulated slag for stabilisation of kaolin clay cured at ambient temperature”, Geotechnical and Geological engineering, 2018, 37(2), 721-740.
https://doi.org/10.1007/s10706-018-0644-2
Abdullah HH, Shahin MA, Walske ML, “Geo-mechanical behavior of clay soils stabilized at ambient temperature with fly-ash geopolymer-incorporated granulated slag”, Soils and Foundations, 59(6), 1906-1920.
Abdullah HH, Shahin MA, Walske ML, Karrech A, “Systematic approach to assessing the applicability of fly-ash-based geopolymer for clay stabilization”, Canadian Geotechnical Journal, 2019(b), 57(9), 1-37.
https://doi.org/10.1139/cgj-2019-0215
Abdullah HH, Shahin MA, Walske ML, “Review of fly-ash-based geopolymers for soil stabilisation with special reference to clay”, Geosciences, 2020, 10 (7), 249.https://doi.org/10.3390/geosciences10070249
Afrin HA, “A Review on different types soil stabilization techniques”, International Journal of Transportation Engineering and Technology, 2017, 3 (2), 19-24. https://doi.org/10.1139/cgj-2019-0215
Alipour R, Heshmati A, Karimiazar J, Esazadefar N, Asghari E, “ Resistance and swelling of Tabriz marl soils stabilised using nano-silica and nano-alumina”, ICE Proceedings Geotechnical Engineering, 2022.
https://doi.org/10.1680/jgeen.21.00016
Al-Mukhtar M, Khattab S, Alcover J-F, “Microstructure and geotechnical properties of lime-treated expansive clayey soil”, Engineering Geology, 2012, 139-140, 17-27.
Azarafza M, Ghazifard A, Akgun H, Asghari-Kaljahi E, “Geotechnical characteristics and empirical geo-engineering relations of the South Pars Zone marls, Iran”, Geomechanics and Engineering, 2019, 19 (5), 393-405. https://doi.org/10.12989/gae.2019.19.5.393.
Bahadori H, Hasheminezhad A, Taghizadeh F, “Experimental study on marl soil stabilization using natural pozzolans”, Journal of Materials in Civil Engineering, 2019, 31 (2), 04018363.
https://doi.org/10.1061/(ASCE)MT.1943-5533.0002577
Buchwald A, Kaps Ch, “Peroperty controlling influences on the generation of geopolymeric binders based on clay”, Geopolymer, 2002, (Melbournd Australia).
Corrêa-Silva M, Araújo N, Cristelo N, Miranda T, Topa Gomes A, Coelho J, “Improvement of a clayey soil with alkali activated low-calcium fly ash for transport infrastructures applications”, Road Materials and Pavement Design, 2019, 20 (8), 1912-1926.
https://doi.org/10.1080/14680629.2018.1473286
Cristelo N, Glendinning S, Fernandes LSG, Pinto AT, “Efect of calcium content on soil stabilisation with alkaline activation”, Construction and Building Materials, 2012, 29, 167-174.
Cristelo N, Teixeira Pinto A, Glendinning A, “Deep soft soil improvement by alkaline activation”, Proceedings of the Institution of Civil Engineers - Ground Improvement, 2011, 164(2), 73-82.
https://doi.org/10.1680/grim.900032.
Davidovits J, “Geopolymers”, Journal of Thermal Analysis, 1991, 37 (8), 1633-1656.
https://doi.org/10.1007/BF01912193.
Duxson P, Ferna´ndez-Jime´nez A, Provis JL, Lukey GC, Palomo A, Van Deventer JSJ, “Geopolymer technology: the current state of the art”, Journal of Material Science, 2007, 42, 2917-2933.
https://doi.org/10.1007/s10853-006-0637-z
Elert K, Nieto F, Azañón JM, “Effects of lime treatments on marls”, Applied Clay Science, 2017, 135 611-619. https://doi.org/10.1016/j.clay.2016.10.047
Ghadir P, Ranjbar N, “Clayey soil stabilization using geopolymer and Portland cement”, Construction and Building Materials, 2018, 188, 361-371.
Ghobadi MH, Abdilor Y, Babazadeh R, “Stabilization of clay soils using lime and effect of pH variations on shear strength parameters”, Bulletin of Engineering Geology and the Environment, 2014, 73 (2), 611-619. https://doi.org/10.1007/s10064-013-0563-7
Horpibulsukn S, Phetchuay Ch, Chinkulkijniwat A, Cholaphatsorn A, “Strength development in silty clay stabilized with calcium carbide residue and fly ash”, Soils and Foundations, 2013, 53 (4), 477-486.
https://doi.org/10.1016/j.sandf.2013.06.001
Hooshmand A, Aminfar MH, Asghari E, Ahmadi H, “Mechanical and physical characterization of Tabriz Marls, Iran”, Geotechnical and Geological Engineering, 2012, 30 (1), 219-232.
https://doi.org/10.1007/s10706-011-9464-3
Khale D, Chaudhary R, “Mechanism of geopolymerization and factors influencing its development: a review”, Journal of Materials Science, 2007, 42, 729-746.
https://doi.org/10.1007/s10853-006-0401-4
Lamas F, Irigaray C, Chacón J, “Geotechnical characterization of carbonate marls for construction of impermeable dam cores”, Engineering. Geology, 2002, 66, 283-294.
Li C, Sun H, Li L, “A review: The comparison between alkali-activated slag (Si+Ca) and metakaolin (Si+Al) cements”, Cement and Concrete Research, 2010, 40, 1341-1349.
https://doi.org/10.1016/j.cemconres.2010.03.020.
Liu Z, Cai C, Liu F, Fan F, “Feasibility Study of Loess Stabilization with Fly Ash-Based Geopolymer”, Journal of Material in Civil Engineering, 2016, 28, 04016003.
Lodeiro IG, Palomo A, Fernández-Jiménez A, “An overview of the chemistry of alkali-activated cement-based binders”, In Handbook of Alkali-Activated Cements, Mortars and Concretes, 2015, Elsevier BV: Amsterdam, The Netherlands, 19-47.
https://doi.org/10.1533/9781782422884.1.19.
Morsy MS, Alsayed SH, Salloum YA, Almusallam T, “Effect of sodium silicate to sodium hydroxide ratios on strength and microstructure of fly ash geopolymer binder”, Arabian Journal for Science and Engineering, 2014, 39(6), 4333-4339.
https://doi.org/10.1007/s13369-014-1093-8
Obuzor GN, Kinuthia JM, Robinson RB, “Soil stabilisation with lime-activated-GGBS-a mitigation to flooding effects on road structural layers/embankments constructed on floodplains”, Engineering Geology, 2012, 151, 112-139.
https://doi.org/10.1016/j.enggeo.2012.09.010.
Pacheco-Torgal F, Castro-Gomes J, Jalali S, “Alkali-activated binders: a review.Part 2. About materials and binders manufacture”, Construction and Building Materials, 2008, 22 (7), 1315-1322.
https://doi.org/10.1016/j.conbuildmat.2007.03.019.
Pera J, “Metakaolin and calcined clays”, Cement and Concrete Composites, 2001, 23, 441-454.
https://DOI:10.1016/S0958-9465(00)00092-5.
Phetchuay C, Horpibulsuk S, Arulrajah A, Suksiripattanapong C, Udomchai A, “Strength development in soft marine clay stabilized by fly ash and calcium carbide residue based geopolymer”, Applied Clay Science, 2016, 134-142.
https://doi.org/10.1016/j.clay.2016.04.005
Phummiphan I, Horpibulsuk S, Sukmak P, Chinkulkijniwat A, Arulrajah A, Shen S, “Stabilisation of marginal lateritic soil using high calcium fly ash-based geopolymer”, Road Materials and Pavement Design, 2017, 17, 1-15.
Provis JL, Deventer JSJ, Van D, “Geopolymers: structures, processing, properties and industrial applications”, CRC Press, 2009, Cambridge UK.
Rethinking Cement. Available online: https://bze.org.au/research/manufacturing-industrial-processes/rethinking-cement/ (accessed on 29 May 2020).
Rios S, Ramos C, Viana da Fonseca A, Cruz N, Rodrigues C, “Colombian soil stabilized with geopolymers for low cost roads”, Procedia Engineering, 2016, 143, 1392-1400. https://doi.org/10.1016/j.proeng.2016.06.164.
Singhi B, Laskar AI, Ahmed MA, “Investigation on soil-geopolymer with slag, fly ash and their blending”, Arabian Journal for Science and Engineering, 2015, 41, 393-400. https://DOI: 10.1007/s13369-015-1677-y.
Ureña C, Azañón JM, Corpas FA, Salazar LM, Ramírez A, Rivas F, Mochón I, Sierra MJ, “Construcción de un terraplén con suelo estabilizado mediante el uso de agentes alternativos en la Autovía del Olivar”, Carreteras, 2015, 203, 63-72.
https://doi.org/10.1016/j.conbuildmat.2013.03.053.
Yung-Ming L, Cheng-Yong H, Al Bakri M, Hussin K, “Structure and properties of clay-based geopolymer cements: a review”, Progress in Materials Science, 2016, 83, 595-629.
https://DOI: 10.1016/j.pmatsci.2016.08.002
Xu H, Van Deventer J, “The geopolymerisation of alumino-silicate minerals”, International Journal of Mineral Processing, 2000, 59, 247-266.
https://doi.org/10.1016/S0301-7516(99)00074-5.
Zhang M, Guo H, El-Korchi T, Zhang G, Tao M, “Experimental feasibility study of geopolymer as the next-generation soil stabilizer”, Construction and Building Materials, 2013, 47,1468-1478.
https://doi.org/10.1016/j.conbuildmat.2013.06.017.
Zhang YS, “Research on structure formation mechanism and properties of high-performance geopolymer concrete”, PhD Thesis, 2003, Southeast University, Nanjing.