Performance of Pipe Dampers in Pipe and Center under Cyclic Load in Energy Dissipation

Authors

1 Department of Civil Engineering, Sanandaj Branch, Islamic Azad University, Sanandaj, Iran

2 Department of civil engineering, Sanandaj Branch, Islamic Azad University, Sanandaj, Iran

Abstract

In the 1970, Popov et al. Developed plans to make plastic joints in frames with eccentric bracing to increase energy dissipation (Roeder and Egor, 1978), and since the late 1980s, the use of steel dampers has been common in countries such as Japan and Indonesia. Has been. Different types of steel dampers have been used since then, for example ADAS, X-shaped and honeycomb dampers are some of the steel dampers that are still under development and research studies have been done on them (Askariani et al. 2020).

Keywords

Main Subjects

References

ABAQUS Analysis user’s manual version 6.12. ABAQUS Inc. 2012.
Aghlaraa R, Tahir M, “A passive metallic damper with replaceable steel bar components for earthquake protection of structures”, Engineering Structures, 2018, 159, 185-197.
Askariani SS, Sadegh Garivani S, “Introducing and numerical study of a new brace-type slit damper”, Structures, 2020, 27, 702-717.
ASTM A370. Standard test methods and definitions for mechanical testing of steel products, West Conshohocken (PA, USA), 2002.
Bae J, Lee C, Park M, Alemayehu RW, Ryu J, Ju YK, “Modified Low-Cycle Fatigue Estimation Using Machine Learning for Radius-Cut Coke-Shaped Metallic Damper Subjected to Cyclic Loading”, International Journal of Steel Structures; 2020. https://doi.org/10.1007/s13296-020-00377-7
Choi H, Kim J, “Energy-based seismic design of buckling-restrained braced frames using hysteretic energy spectrum”, Engineering Structures, 2006, 28 (2), 304-311.
Chukka N, Kumar Reddy D, Krishnamurthy M, “Comparison of X-shaped metallic dampers with fluid viscous dampers and influence of their placement on seismic response of the building”, Asian Journal of Civil Engineering, 2019, 20 (6), 869-882.
Civjan SA, Singh P, “Behavior of shear studs subjected to fully reversed cyclic loading”, Journal of Structural Engineering, ASCE, 2003, 129 (11), 1466-1474.
Eskandari M, Pournamazian Najafabadi E, “Experimental and analytical study of telescopic lead yielding damper”, Journal of Constructional Steel Research, 2018, 150, 371-383.
Ghaedi Kh, Ahad Javanmardi A, Ibrahim Z, “A New Passive bar Damper Device for Alleviation of Structural Damages of Structures Subjected to Seismic Motions”, Tr Civil Eng & Arch, 2018, 1 (3), TCEIA.MS.ID.000115, 2018.
Guo W, Ma Ch, Yu Y, Bu D, Zeng Ch, “Performance and optimum design of replaceable steel strips in an innovative metallic damper”, Engineering Structures, 2020a, 205, 110118.
Guo W, Wang X, Chen X, Li S, Fang W, Zeng Ch, Wang Y, Bu D, “Experimental study of a steel damper with X-shaped welded pipe halves”, Journal of Constructional Steel Research, 2020b, 170, 106087.
Javanmardi A, Ibrahim Z, Ghaedi K, Benisi Ghadim H, Hanif U, “State-of-the-art review of metallic dampers: Testing, development and implementation”, Archives of Computational Methods in Engineering, 2020, 27 (2), 455-478.
Kamble DS, Umare M, “Seismic response of open ground storey with metallic damper”, International Journal for Research in Applied Science and Engineering Technology, 2019, 7 (5), 316-319.
Kim Y, Ahn T, Kim H, Jang D, “Development of new steel damper for seismic retrofit of existing structures”, In: 15th world congress of earthquake engineering, Lisboa, Portugal, 2012.
Lee M, Lee J, Kim J, “Seismic retrofit of structures using steel honeycomb dampers”, International Journal of Steel Structures, 2017, 17 (1), 215-29.
Liyanage UDD, PereraTN, Maneetes H, “Analysis of X-shaped and Double X-shaped Metallic Dampers on Multistorey Frames”, Journal of the University of Ruhuna, 2020, 7 (1), 12.
Maleki S, Bagheri S, “Pipe damper, part I: experimental and analytical study”, Journal of Constructional Steel Research, 2010, 66, 1088-1095.
Maleki S, Mahjoubi S, “Dual-pipe damper”, Journal of Constructional Steel Research, 2013, 85, 81-91.
Park J, Lee J, Kim J, “Cyclic test of buckling restrained braces composed of square steel rods and steel tube”, Steel and Composite Structures, 2012, 13, 423-436.
Roeder CW, Egor PP, “Eccentrically braced steel frames for earthquakes”, Journal of the Structural Division, 1978, 104 (3), 391-412.
Xia C, Hanson RD, “Influence of ADAS element parameters on building seismic response”, Journal of Structural Engineering, 1992, 118 (7), 1903-1918.
Journal of Civil and Environmental Engineering
Volume 53.2, Issue 111 - Serial Number 111
Summer 2023
August 2023
Pages 44-49

Files

Share

How to cite

Statistics