Studying the Effect of Silica Fume on the Fracture Toughness and Fracture Energy of Self-Compacting Lightweight Concrete

Authors

1 Department of Mechanical Engineering, Khatam Ol Anbia University, Tehran, Iran

2 Department of Civil Engineering, Shahid Rajaee Teacher Training University, Lavizan, Tehran, Iran

Abstract

Self-compacting lightweight concrete (SCLC) is one type of concrete that its usage has widely increased. The use of some additives in the production of SCLC can both reduce its costs and improve its properties. The effects of different cement replacement materials have been studied by several researchers. Jalal et al. (2012) claimed that the use of silica fume could improve the electrical resistance and mechanical properties of self-compacting concrete, and reduce its water absorption. Moreover, the use of silica fume in normal concrete improves the bond between aggregate and paste surfaces, and it has positive effects on fracture toughness, compressive strength and tensile strength (Lam et al., 1998).
To simulate the fracture behavior of concrete in numerical models of concrete, depending on the model, some parameters such as fracture energy, fracture toughness and critical effective crack-tip opening displacement ( or δc), which generally are known as fracture parameters, must be determined. In this regard, Peterson (1980) showed that the fracture parameters are significantly affected by water to cement ratio (w/c) and the quality of aggregate. In other words, by reducing w/c or using stronger aggregate, the fracture energy of concrete increases.
In this study, the effect of w/c and silica fume on the fracture toughness and fracture energy of SCLC has been investigated. Therefore, by making six mix designs and 126 concrete specimens, fracture parameters, mechanical properties and the workability of fresh concrete were carefully studied. Initially, four mix designs with the w/c of 0.37, 0.42, 0.47 and 0.52 were made. Afterwards, by replacing 0, 5% and 10% of the weight of cement with silica fume, the effects of changing this parameter on the fracture parameters of SCLC were studied.

Keywords

Main Subjects

References

ACI-318-14, “Building code requirements for structural concrete and commentary on building code requirements for structural concrete”, American Concrete Institute, 2015.
ACI-213R-03, “Guide for structural lightweight-aggregate concrete”, Farmington Mills, MI, USA: ACI, 2003.
Agwa IS, Omar OM, Tayeh BA, Abdelsalam BA, “Effects of using rice straw and cotton stalk ashes on the properties of lightweight self-compacting concrete”, Construction and Building Materials, 2020, 235, 117541.
Akcaoglu T, Tokyay M, Celik T, “Effect of coarse aggregate size and matrix quality on ITZ and failure behavior of concrete under uniaxial compression”, Cement and Concrete Composites, 2004, 26, 633-638.
ASTM-C469, “Standard test methods for static modulus of elasticity and Poisson’s ratio of concrete in compression”, American Society of Testing Materials, 2002.
ASTM-C494, “Standard specification for chemical admixtures for concrete”, American Society of Testing Materials, 2001.
ASTM-C496, “Standard test method for splitting tensile strength of cylindrical concrete specimens”, West Conshohocken, PA, USA, ASTM International, 2002.
ASTM-C127 A, “Standard test method for specific gravity and absorption of coarse aggregate”, American Society for Testing and Material, 1993.
ASTM-C330, “Standard Specification for Lightweight Aggregates for Structural Concrete”, ASTM International, 2017.
ASTM-C33, “Standard specification for concrete aggregates”, Philadelphia, PA: American Society for Testing and Materials, 2003.
Bazant ZP, Pfeiffer PA, “Determination of fracture energy from size effect and brittleness number”, ACI Materials Journal, 1987, 84, 463-480.
Bentz DP, “Influence of internal curing using lightweight aggregates on interfacial transition zone percolation and chloride ingress in mortars”, Cement and Concrete Composites, 2009, 31, 285-289.
Beygi MHA, Kazemi MT, Nikbin IM, Vaseghi Amiri J, “The effect of water to cement ratio on fracture parameters and brittleness of self-compacting concrete”, Materials and Design, 2013, 50, 267-276.
Bharatkumar BH, Raghuprasad BK, Ramachandramurthy DS, Narayanan R, Gopalakrishnan S, “Effect of fly ash and slag on the fracture characteristics of high performance concrete”, Materials and Structures, 2005, 38, 63-72.
BS-EN-12390-Part3, “Testing hardened concrete: Compressive strength of test specimens. part 3”, London, UK: BSI. 2001.
Chang TP, Shieh MM, “Fracture properties of lightweight concrete”, Cement and concrete research, 1996, 26, 181-188.
EFNARC, “Specification & Guidelines for Self-Compacting Concrete”, Farnham, UK, European Federation for Specialist Construction Chemicals and Concrete Systems, 2002.
Eskandari H, Muralidhara S, Raghuprasad B, Reddy BV, “Size effect in self consolidating concrete beams with and without notches”, Sadhana, 2010, 35, 303-317.
Ince R, Alyamac KE, “Determination of fracture parameters of concrete based on water-cement ratio”, Indian Journal of Engineering and Materials Sciences, 2008, 15 14-22.
Jalal M, Mansouri E, Sharifipour M, Pouladkhan AR, “Mechanical, rheological, durability and microstructural properties of high performance self-compacting concrete containing SiO2 micro and nanoparticles”, Materials and Design, 2012, 34, 389-400.
Jenq Y, Shah SP, “Two parameter fracture model for concrete”, Journal of Engineering Mechanics, 1985, 111, 1227-1241.
Ji T, Zhang BB, Zhuang YZ, Wu HC, “Effect of lightweight aggregate on early-age autogenous shrinkage of concrete”, ACI Materials Journal, 2015, 112, 355-363.
Karamloo M, Afzali-Naniz O, Doostmohamadi A, “Impact of using different amounts of polyolefin macro fibers on fracture behavior, size effect, and mechanical properties of self-compacting lightweight concrete”, Construction and Building Materials, 2020, 250, 118856.
Khan MI, Usman M, Rizwan SA, Hanif A, “Self-consolidating lightweight concrete incorporating limestone powder and fly ash as supplementary cementing material”, Materials, 2019, 12, 3050.
Khatri R, Sirivivatnanon V, Gross W, “Effect of different supplementary cementitious materials on mechanical properties of high performance concrete”, Cement and Concrete Research, 1995, 25, 209-220.
Lam L, Wong Y, Poon C-S, “Effect of fly ash and silica fume on compressive and fracture behaviors of concrete”, Cement and Concrete research, 1998, 28, 271-283.
Mazloom M, Ramezanianpour A, Brooks J, “Effect of silica fume on mechanical properties of high-strength concrete”, Cement and Concrete Composites, 2004, 26, 347-357.
Mazloom M, Salehi H, “The relationship between fracture toughness and compressive strength of self-compacting lightweight concrete”, IOP Conference Series: Materials Science and Engineering, IOP Publishing, 2018, 062007.
Mohammadi Y, Mousavi SS, Rostami F, Danesh A, Sarand NI, “The Effect of Silica Fume on the Properties of Self-Compacted Light weight Concrete”, Special Issue of Current World Environment, 2015, 10.
Nagataki S, Fujiwara H, “Self-compacting property of highly flowable concrete”, Special Publication, 1995, 154, 301-314.
Naus DJ, Batson GB, Lott JL, “Fracture mechanics of concrete”, Fracture Mechanics of Ceramics, Springer, 1974, 469-482.
Nikbin IM, Beygi MHA, Kazemi MT, Vaseghi Amiri J, Rabbanifar S, Rahmani E, Rahimi S, “A comprehensive investigation into the effect of water to cement ratio and powder content on mechanical properties of self-compacting concrete”, Construction and Building Materials, 2014, 57, 69-80.
Petersson PE, “Fracture energy of concrete: practical performance and experimental results”, Cement and Concrete research, 1980, 10 (1), 91-101.
RILEM FTM-89, “Size-effect method for determining fracture energy and process zone size of concrete”, 1990, 23, 461-465.
Sabet FA, Libre NA,Shekarchi M, “Mechanical and durability properties of self consolidating high performance concrete incorporating natural zeolite, silica fume and fly ash”, Construction and Building Materials, 2013, 44, 175-184.
Salehi H, Mazloom M, “Experimental and numerical studies of crack propagation in self-compacting lightweight concrete”, Modares Mechanical Engineering, 2018, 18, 144-155.
Salehi H, Mazloom M, “Effect of magnetic-field intensity on fracture behaviors of self-compacting lightweight concrete”, Magazine of Concrete Research, 2019a, 71, 665-679.
Salehi H, Mazloom M, “An experimental investigation on fracture parameters and brittleness of self-compacting lightweight concrete containing magnetic field treated water”, Archives of Civil and Mechanical Engineering, 2019b, 19, 803-819.
Salehi H, Mazloom M, “Opposite effects of ground granulated blast-furnace slag and silica fume on the fracture behavior of self-compacting lightweight concrete”, Construction and Building Materials, 2019c, 222, 622-632.
Singh G, “Study on collective effect of silica fume and steel fiber on strength and durability properties of concrete”, Materials Today: Proceedings, 2021, 37, 2256-2265.
Journal of Civil and Environmental Engineering
Volume 53.1, Issue 110 - Serial Number 110
Spring 2023
May 2023
Pages 139-151

Files

Share

How to cite

Statistics