@article { author = {Sharbatdar, Mohammad Kazem and Oruhi, Majid}, title = {Improved Compressive, Tensile and Flexural Strength of Non-Reinforced Specimens and Reinforced Beams Including Zeolite}, journal = {Journal of Civil and Environmental Engineering}, volume = {48.4}, number = {93}, pages = {103-113}, year = {2019}, publisher = {Dean of Faculty of Civil Engineering}, issn = {2008-7918}, eissn = {2717-4077}, doi = {10.22034/ceej.2019.8513}, abstract = {In recent years the natural zeolite as a supplementary cementitious material (Ahmadi, Shekarchi, 2010) and natural zeolite as construction materials were used in different countries and for different special concretes (Feng, Peng, 2005; Türkmen, Aydin, 2010; and Uzal, Turanli, Mehta, 2007). In the present paper, results of experimental investigations on using zeolite and silica fume as two pozolane materials in concrete mixes at two different cases of separately and mixed together and their effects on compressive, tensile and flexural strengths are presented. In this research program, experimental study was followed by selecting and designing eight different concrete mixes containing constant water-cement ratio equal 0.5 with reference mix without any mineral material. Then zeolite and silica fume were added separately and mixed together to concrete replacing with percentage of cement weight. Zeolite with three percent of 5, 10, 15 percent and silica fume with 7% were considered. Two different mechanical and structural specimens were casted, 48 compressive cubic and 24 tensile strength cylinder and 24 non-reinforce flexural strength beams as mechanical specimens were cast. And also 8 structural reinforced beam specimens were cast based for measuring flexural capacity.}, keywords = {Concrete strength,Mineral materials,Pozzolan,Mechanical,Structural properties}, title_fa = {مقاومت فشاری، کششی و خمشی بهبود یافته نمونه‌های غیر مسلح و تیرهای مسلح بتنی حاوی زئولیت}, abstract_fa = {استفاده از مواد معدنی در دسترس برای بهبود خواص ذاتی بتن از جمله مقاومت مکانیکی و دوام آن لازم است. در این پژوهش به منظور بررسی خواص بتن­های حاوی زئولیت، 8 طرح مخلوط با نسبت آب به سیمان 5/0 و افزودن زئولیت 5، 10 و 15 درصد و همچنین افزودن 7 درصد دوده سیلیسی طراحی و در دو بخش خواص مکانیکی و سازه­ای، نمونه­هایی ساخته شد. در سنجش خواص سازه­ای از 4 طرح اختلاط بهینه شامل بتن معمولی، بتن دوده سیلیسی (7 درصد)، بتن زئولیتی (10 درصد)، بتن حاوی زئولیت و دوده سیلیسی (5 درصد زئولیت و 7 درصد دوده سیلیسی) استفاده گردید. در بخش سنجش خواص مکانیکی 48 نمونه بتنی مکعبی فشاری، 24 نمونه تیر خمشی غیر مسلح، 24 نمونه استوانه­ای کششی و در بخش سنجش خواص سازه­ای 8 تیر بتن آرمه ساخته شدند. نتایج آزمایشگاهی نشان داد که افزودن پوزولان زئولیت در بتن در تمامی طرح­های مخلوط باعث افزایش مقاومت فشاری، کششی و خمشی گردید که درصد بهینه 10 درصد به عنوان مناسب­ترین درصد حاصل گردید. مقاومت فشاری 72 روزه نسبت به مقاومت 28 روزه بتن مرجع به میزان 26 درصد افزایش نشان داد. ضمناً افزودن دوده سیلیسی در بتن اثری بهتر از پوزولان زئولیت داشت به طوری که نسبت مقاومت خمشی 72 روزه تیرهای حاوی 10% زئولیت و 7% دوده سیلیسی این دو نمونه نسبت به مقاومت خمشی تئوری نمونه مرجع به ترتیب 27 و 33% افزایش داشتند.}, keywords_fa = {مقاومت بتن,مصالح معدنی,پوزولان,زئولیت,خواص مکانیکی,خواص سازه‌ای}, url = {https://ceej.tabrizu.ac.ir/article_8513.html}, eprint = {https://ceej.tabrizu.ac.ir/article_8513_e61c830ecb668a67aca0e097281c00c8.pdf} }