@article { author = {Shooshpasha, Issa and Nejati Namin, Hamidreza}, title = {An Experimental Study on the Combined Effect of Reinforcement and Stabilization on the Shear Behavior of Babolsar Sand}, journal = {Journal of Civil and Environmental Engineering}, volume = {49.4}, number = {97}, pages = {83-91}, year = {2020}, publisher = {Dean of Faculty of Civil Engineering}, issn = {2008-7918}, eissn = {2717-4077}, doi = {10.22034/ceej.2020.8444}, abstract = {   Improvement of weak soils with adding elements such as fibers that can increase tensile strength and stabilizing soils with additives that react chemically with them to make soils with desirable engineering properties is called reinforcement and stabilization (Consoli et al 2009). Researchers have always tried to improve bearing capacity, strength and properties of soil using different methods such as mechanical and chemical modifications and also reinforcement by high tensile strength elements Ghiassian, H. and Holtz, D, H., 2005). Randomly distributed discrete fibers offer strength isotropy and limit potential planes of weakness that can develop parallel to oriented reinforcement (Yetimoglu, T. and Salbas, O., 2003). Cementation in its general sense is binding and in geotechnical engineering, cementation is sticking soil particles to each other to form a cohesive mass with a higher strength. Soil structure is one of the factors that can affect behavior of (fine and coarse- grained) soils. Cementation plays an important role in the structure formation of coarse-grained soil. Soil structure is geometric arrangement of the soil particles and the forces, if any, between them the objective of this research is experimental study of the effect of reinforcement and stabilization on the behavior of sandy soil and evaluating effect of fibers on the shear behavior of cemented sand using strain-controlled triaxial tests under consolidated undrained conditions.}, keywords = {Babolsar Sand,pore pressure,Triaxial test}, title_fa = {بررسی آزمایشگاهی اثر توأمان تسلیح و تثبیت بر رفتار برشی ماسه بابلسر}, abstract_fa = {یکی از روش­های بهسازی خاک­های ماسه­ای کم مقاومت افزودن سیمان به آن می­باشد. جهت بهبود خصوصیات خاک‌های موجود در محل پروژه، بحث اصلاح خاک مطرح می‌شود که می‌توان از روش‌های تثبیت با مواد افزودنی و یا تسلیح خاک با الیاف طبیعی و یا مصنوعی و یا ژئوسنتتیک­ها استفاده نمود. در چند دهه گذشته پژوهش‌هایی روی تأثیر تسلیح و تثبیت در شرایط زهکشی شده بر روی ماسه انجام‌ گرفته است، ولی فقدان و کمبود پژوهش در شرایط زهکشی نشده وجود دارد. در این پژوهش به بررسی تأثیر الیاف پلی­وینیل الکل و سیمان بر روی رفتار برشی ماسه پرداخته شده است که با استفاده از دستگاه سه محوری آزمایش در شرایط تحکیم یافته زهکشی نشده صورت گرفته است. نتایج آزمایش­ها نشان می­دهد که وجود رشته­ها با توزیع تصادفی تأثیر قابل ملاحظه­ای بر رفتار ماسه تثبیت شده با سیمان دارد، با افزایش درصد رشته تمایل به رفتار انقباضی افزایش و مکش‌ نهایی‌کاهش می­یابد و حالت انتقال فاز در تنجش­های بالاتری اتفاق می­افتد و همچنین باعث افزایش تنجش گسیختگی، مقاومت بیشینه، پتانسیل جذب انرژی و کاهش افت مقاومت پسماند و سختی می­شود. با افزایش در فشار دورگیر ضریب شکنندگی کاهش و تنجش گسیختگی، مقاومت بیشینه، مقاومت پسماند و سختی نمونه­های سیمانی افزایش می­یابد.}, keywords_fa = {ماسه بابلسر,تثبیت,تسلیح,فشار منفذی,آزمایش سه‌محوری}, url = {https://ceej.tabrizu.ac.ir/article_8444.html}, eprint = {https://ceej.tabrizu.ac.ir/article_8444_d37638ab13912aeaadc18e79831db540.pdf} }