@article { author = {Moradi, Gholam and Seyedi, Shiva}, title = {Evaluation of Effective Strength Parameters and Micro Structural Variations of Silty Sands Stabilized with Nano Colloidal Silica}, journal = {Journal of Civil and Environmental Engineering}, volume = {46.4}, number = {85}, pages = {77-88}, year = {2017}, publisher = {Dean of Faculty of Civil Engineering}, issn = {2008-7918}, eissn = {2717-4077}, doi = {}, abstract = {Saturated deposits of sands and silty sands are liquefiable during earthquakes. One of the new methods proposed for non-disruptive mitigation of liquefaction risk at developed sites is passive site stabilization. It involves slow injection of colloidal silica at the edge of a site and delivery of the stabilizer to the target location using natural groundwater flow [1]. Colloidal silica is an aqueous suspension of microscopic silica (SiO2) particles produced from saturated solutions of silicic acid [2]. The particles size can range in size from 2 to 100 nm, although the particle size is fairly constant in a given suspension. During manufacturing, colloidal silica solutions are stabilized against gelation so they can have long induction periods during which the viscosity remains fairly low up to a few months. A few studies have investigated the behavior of sands stabilized with colloidal silica. Persoff et al. measured short term strength of about 430 kPa at concentration of 20 wt% colloidal silica [3]. Gallagher and Mitchell found the baseline unconfined compressive strength ranged from 32 to 222 kPa in period of 7-30 days at sands samples treated with 5-20 wt% colloidal silica. They also did a series of cyclic triaxial tests and found that for passive site remediation, a 5 wt% concentration of colloidal silica is expected to be able to adequately mitigate the liquefaction risk of loose sands [4]. The stabilization of loose silty sand with colloidal silica has not been studied comprehensively so the present study was undertaken to investigate the unconfined compressive strength and microstructure analysis of silty sands stabilized with colloidal silica.}, keywords = {Unconfined compressive test,Silty sand,Colloidal silica,Concentration,Curing,SEM analysis}, title_fa = {ارزیابی تغییرات ریزساختاری و پارامترهای مقاومتی ماسه‌های سیلتی تثبیت شده با نانو کلوئید سیلیکا}, abstract_fa = {به منظور بررسی رفتار ماسه­های سیلتی تثبیت شده با نانو کلوئید سیلیکا، 32 نمونه، تحت آزمایش مقاومت فشاری محدود نشده قرار گرفته و ریزساختار تعدادی نمونه، توسط میکروسکوپ الکترونی روبشی (SEM) بررسی شده است. نمونه­های آزمایش مقاومت تک­محوری، شامل مخلوط ماسه و مقادیر صفر، 10، 20 و 30 درصدی سیلت بوده و به روش رسوب­گذاری در محلول­های کلوئید سیلیکا با غلظت 5، 10 و 15 درصد وزنی، تهیه شده­اند. دوره عمل­آوری نمونه­ها نیز، 3 تا 30 روز در نظر گرفته شده است. با وجود این که در شرایط طبیعی، ماسه­ها و سیلت­ ها فاقد چسبندگی و مقاومت فشاری محدود نشده می­باشند، ولی مقاومت فشاری نمونه­های مختلف تثبیت شده آن­ها، در محدوده قابل توجه 25 تا 240 کیلوپاسکال قرار می­گیرد. ملاحظه می­شود در تمامی شرایط متفاوت تثبیت، بین افزایش مقاومت فشاری نمونه­ها با افزایش غلظت کلوئید سیلیکا و افزایش طول مدت عمل­آوری، رابطه­ای خطی برقرار است. اگر چه با کاهش زمان گیرش کلوئید، از شدت تأثیر زمان عمل­آوری، کاسته می­شود. همچنین در شرایط یکسان تثبیت، نمونه­های ماسه سیلتی با 10 درصد سیلت، بیشترین مقاومت فشاری را در بین دیگر نمونه­ها دارند. از طرفی دیگر، تفاوت شکل و سطوح ذرات ماسه -سیلت طبیعی و تثبیت شده، توسط تصاویر میکروسکوپ الکترونی روبشی به وضوح آشکار می­گردد، به طوری که مشخص می­شود سطح ذرات تثبیت شده، دارای توده­های لایه­ای از کلوئید سیلیکا می­باشند.}, keywords_fa = {ماسه‌های سیلت‌دار,کلوئید سیلیکا,آزمایش مقاومت فشاری تک‌محوری,غلظت,زمان عمل‌آوری,میکروسکوپ الکترونی روبشی (SEM)}, url = {https://ceej.tabrizu.ac.ir/article_5920.html}, eprint = {https://ceej.tabrizu.ac.ir/article_5920_749fa5568103c460b736c4c472ef17f5.pdf} }