@article { author = {Mazloom, Moosa and Salehi, Vahid}, title = {Studying the Behavior of Central Gusset Plate Connections on Inverted V-Braces}, journal = {Journal of Civil and Environmental Engineering}, volume = {46.2}, number = {83}, pages = {95-106}, year = {2016}, publisher = {Dean of Faculty of Civil Engineering}, issn = {2008-7918}, eissn = {2717-4077}, doi = {}, abstract = {In this research, the hysteretic behavior of 14 inverted-V braces and their gusset plate connections subjected to inelastic cyclic loading is examined through analytical simulations. It was modeled in ABAQUS software and the analysis type was static nonlinear analysis. Gusset plates with a constant thickness but with different sizes and shapes were used. To verify the correctness of the analysis, hysteretic behavior of gusset plates obtained from analysis was compared with experimental results. This comparison showed the exactness of the modeling. Then 14 samples of more important gusset plates in terms of ductility and strength were compared. The final result is that although stiffener in the gusset plates increase the strength of connections, they reduce ductility; so, numerous and indiscriminate addition of stiffeners in gusset plates are not recommended.}, keywords = {Gusset plate,Hysteretic behavior,ABAQUS}, title_fa = {مطالعه رفتار ورق‌های اتصال میانی در مهاربندهای 8 هم محور}, abstract_fa = {در این تحقیق رفتار هیسترزیس ورق­های اتصال میانی 14 نمونه مهاربند 8 هم­محور مدل­سازی شدند. این مدل­ها در نرم­افزار ABAQUS ساخته شدند و تحلیل استفاده شده، از نوع استاتیکی غیر خطی بود. نحوه بارگذاری به صورت چرخه­ای انجام گرفت که در ابتدا به صورت اعمال بار و سپس شامل اعمال تغییر مکان به سازه شد. ورق­های اتصال با ضخامت مشخص ولی با ابعاد و شکل­های متفاوت به کار رفت. با استفاده از نتایج تحلیل­های انجام شده، رفتار هیسترزیس ورق­های اتصال به دست آمد و این رفتار با نتایج آزمایشگاهی مقایسه گردید و صحت انجام تحقیق توسط نرم­افزار آباکوس اثبات شد. سپس تعداد 14 نمونه ورق اتصال که از نظر شکل­پذیری و مقاومت دارای اهمیت بیشتری بودند، با هم مقایسه گردیدند. نتیجه نهایی این است که اگر چه وجود سخت کننده در ورق اتصال سبب افزایش مقاومت اتصال می­شود، ولی شکل­پذیری آن را کم می­کند؛ بنابر این افزودن سخت­کننده­های متعدد و بی­رویه در ورق اتصال توصیه نمی­شود.}, keywords_fa = {ورق اتصال,منحنی هیسترزیس,ABAQUS}, url = {https://ceej.tabrizu.ac.ir/article_5193.html}, eprint = {https://ceej.tabrizu.ac.ir/article_5193_e0f34b08b97eb6a44d375c32138090a5.pdf} }