@article { author = {Danesh, Masood and Alizadeh, Akbar}, title = {Investigating Effect of Chevron Bracing on Coefficient of Behavior and Ductility Ratio of Reinforcement Concrete Structures}, journal = {Journal of Civil and Environmental Engineering}, volume = {51.4}, number = {105}, pages = {161-170}, year = {2021}, publisher = {Dean of Faculty of Civil Engineering}, issn = {2008-7918}, eissn = {2717-4077}, doi = {10.22034/jcee.2020.11116}, abstract = {Earthquake is an unpredictable and destructive event that affects most of urban regions. It is a necessary job to reduce the earthquake damages to a minimum level. The supervision of an especial organization on design principles is an effective solution to minimize structures damages. On the other hand, there are plenty of buildings that have been constructed before establishment of supervision organizations. Two solutions can be introduced to these structures. The first is demolition and reconstruction; the second is retrofitting. The first is not satisfactory because of its high cost, however, the second is usually preferred. The second solution is cost-effective and has been proved that can be useful to minimize the seismic risks. One of the methods to retrofit concrete structures is using steel bracings. Chevron bracings were used in this paper to retrofit the concrete structure. The changes in seismic parameters like coefficient of behavior, initial stiffness, absorbed amount of energy, and ductility ratio were calculated.}, keywords = {Strengthening,Chevron steel brace,Concrete Frame,Coefficient of Behavior,ductility Ratio}, title_fa = {بررسی تأثیر استفاده از مهاربند شورون بر ضریب رفتار و نسبت شکل‌پذیری سازه‏های بتن آرمه}, abstract_fa = {در این مقاله، به بررسی رفتار هیسترزیس (Hysteresis) سازه‏ های بتن ‏آرمه مقاوم ­سازی شده با مهاربند فولادی شورون (Chevron) پرداخته شده است. هدف از تحقیق، بررسی تأثیر مهاربند شورون، بر ضریب رفتار و نسبت شکل ­پذیری سازه‏ های بتن ‏آرمه می‏ باشد. بدین منظور، ابتدا دو سازه‏ 3 و 6 طبقه‏ واقع در شهرستان خوی، بر روی خاک تیپ 3 با سقف تیرچه بلوک به­ کمک نرم ­افزار ایتبس (ETABS) مدل‏سازی، تحلیل و طراحی شد، سپس از هر کدام از این سازه ‏ها، یک از قاب استخراج و در نرم­ افزار سایزمواستراکچرز (Seismostruct)، مدل‏سازی و تحت تحلیل پوش ‏اور قرار گرفته، منحنی‏ های ظرفیت آن‏ها، استخراج گشت. سپس همان قاب‏ ها، با مهاربند اضافه شده‏ شورون به مقطع box10، تحت تحلیل پوش‏ اور قرار گرفتند و منحنی طرفیت آن‏ها نیز، استخراج شد. پس از دو خطی کردن تمام منحنی ‏های مذکور به ­روش یانگ (Uang)، ضریب رفتار و نسبت شکل ­پذیری مربوط به آن‏ها، محاسبه گردید. نتایج به ­دست آمده نشان داد که اضافه کردن مهاربند فولادی شورون به قاب بتن ‏آرمه، ضریب رفتار، سختی، انرژی جذب شده و نسبت شکل­ پذیری این سیستم سازه‏ای را بهبود داده، می‏تواند بار نهائی سازه را، افزایش دهد. نتایج نشان­ دهنده‏ افزایش میزان افزایش ضریب رفتار و نسبت شکل­ پذیری با افزودن بادبندی شورون به مدل ‏های مختلف، بین 31 تا 205 درصد است.}, keywords_fa = {مقاوم‌سازی,مهاربند فولادی شورون,قاب خمشی بتنی,ضریب رفتار,نسبت شکل‏پذیری}, url = {https://ceej.tabrizu.ac.ir/article_11116.html}, eprint = {https://ceej.tabrizu.ac.ir/article_11116_fc88a0596665f9d6da85575e3fc0a89e.pdf} }