@article { author = {Ahmadiadli, Mohammad and Rezaei, Amir Hassan}, title = {A Laboratory Study on Rainfall-Induced Landslides}, journal = {Journal of Civil and Environmental Engineering}, volume = {51.2}, number = {103}, pages = {1-10}, year = {2021}, publisher = {Dean of Faculty of Civil Engineering}, issn = {2008-7918}, eissn = {2717-4077}, doi = {10.22034/jcee.2020.30117.1725}, abstract = {< p >< p >Frequently, rainfalls with high intensity and/or low intensity but lasting for a long time cause landslides in many parts of the world (Lu and Godt, 2013). To be used in early warning systems, rainfall intensity-duration (I-D) thresholds generally are the key to predict the time and location of rainfall-induced landslides (Wieczorek and Glade, 2005). In the current study, the flume experiments are used to develop I-D thresholds and to investigate the effect of soil relative densities on it are described (Ahmadi-adli, 2014).}, keywords = {Landslide,Rainfall,Unsaturated Soils,Slope stability,Physical Modeling}, title_fa = {مطالعه آزمایشگاهی زمین لغزش های ناشی از باران در خاک های غیراشباع}, abstract_fa = {< p>< p>در بسیاری از نقاط جهان وقوع بارش­های طولانی و یا خیلی شدید اکثراً سبب وقوع زمین لغرش می‌شود. در این تحقیق، نفوذ باران به داخل یک شیب خاکی غیراشباع و شروع زمین­لغزش از طریق آزمایش بر روی مدل­های آزمایشگاهی بررسی شده و حدود آستانه شدت‌- مدت باران (I-D) برای ایجاد این زمین لغزش‌ها به­دست آمده است. در مدل‌های آزمایشگاهی از ماسه ریز استفاده شده و سطح مدل­ها دارای زاویه شیب ˚56 می‌باشند. بر روی این مدل­ها باران با شدت‌های مختلف به کمک یک سیستم پاشش کنترل شده اعمال شده و تا ایجاد زمین لغزش ادامه یافته است. در آزمایش‌های فلوم، مکش در خاک توسط مکش­سنج­ها، پیشروی جبهه ترشونده با زمان به کمک اندازه‌گیری موقعیت سطح از یک مرجع و تغییر شکل‌ها در خاک نیز به کمک انحراف­سنج‌های مینیاتوری اندازه‌گیری شده‌اند. بر اساس نتایج به­دست آمده برای مصالح استفاده شده، سطح گسیختگی هماهنگ با جبهه ترشونده یا در مجاورت آن بوده و شکل آن مکانیسم گسیختگی انتقالی را نشان می‌دهد، تغییر شکل‌های منجر به زمین لغزش به­صـورت ناگهانی رخ داده، شکـل I-D یک رابطه دوخطی را نشان داده و همچنین افزایش 40% در دانسیته نسبی نمونه­ها موجب افزایش سه برابری در مدت زمان بارش برای ایجاد ناپایداری در مدل­های فیزیکی گردیده­اند. نتایج این تحقیق می‌تواند برای مدل­سازی­های دقیق عددی زمین لغزه‌های ناشی از باران مفید باشد.}, keywords_fa = {زمین لغزش,باران,خاک غیراشباع,پایداری شیروانی‌ها,مدل‌سازی فیزیکی}, url = {https://ceej.tabrizu.ac.ir/article_11256.html}, eprint = {https://ceej.tabrizu.ac.ir/article_11256_a22a57260d3e65d994b736cdf9bd96ed.pdf} } @article { author = {Esmaeili, Jamshid and Aslani, Hossein}, title = {Investigating the Effect of Copper Mine Tailing on the Stress-Strain Behavior of Confined Concrete}, journal = {Journal of Civil and Environmental Engineering}, volume = {51.2}, number = {103}, pages = {11-19}, year = {2021}, publisher = {Dean of Faculty of Civil Engineering}, issn = {2008-7918}, eissn = {2717-4077}, doi = {10.22034/jcee.2019.9098}, abstract = {< p >One of the important factors that affect the concrete behavior is confinement. On the other hand, strength and ductility of concrete depend on the stress–strain characteristics of concrete, which they are also influenced by the confinement of the members (Ahmad and Shah, 1982). Copper mine tailing (CMT) were used to produce environmentally friendly bricks instead of shale and clay by Ahmari and Zhang in 2012. Onuaguluchi and Eren (2016) reported the properties of CMT material used as proper material and a potential additive in mortar and concrete specimens. Huang et al. (2012) studied the application of CMT material to prepare autoclaved aerated concrete. The sum of SiO2, Al2O3 and Fe2O3 in CMT material is 81.88%, which exceeds the 70 percent requirement for class N raw and calcined natural pozzolanas (ASTM C618). Therefore, CMT materials are expected the proper potential to produce pozzolanas (Thomas et al. 2013).}, keywords = {Stress-strain behavior,Copper mine tailing,Confined concrete,Green concrete}, title_fa = {بررسی تأثیر مواد باطله معدن مس بر روی رفتار تنش- کرنش بتن محصورشده}, abstract_fa = {< p>شروع ترک‌خوردگی بین سنگ‌دانه و خمیر سیمان را می­توان آغاز رفتار غیر الاستیک بتن به‌حساب آورد. پاسخ بتن برای این حوزه به توانایی ساختار یا ترکیبات آن بستگی دارد. برای بررسی این موضوع استفاده از محصورکننده جانبی می­تواند راه‌حل مناسبی باشد. این تحقیق قصد دارد که اثرات محصورشدگی و رفتار تنش- کرنش بتن سبز سازه­ای ساخته‌شده با مواد باطله معدن مس را مورد مطالعه قرار دهد. چهار نوع طرح اختلاط برای بررسی اثرات مواد باطله بر رفتار تنش- کرنش بتن محصورشده طراحی گردید. میزان مواد باطله جایگزین سیمان مصرفی با درصدهای صفر، 10، 15 و 20 در مخلوط بتن منظور شد. میلگرد دور پیچ محصورشدگی با گام‌های 75، 50 و 25 میلی‌متر (نسبت حجمی 01/1، 52/1 و 04/3 درصد) در نمونه‌های بتن تعبیه گردید. بر اساس نتایج آزمایش­های انجام ‌شده به‌کارگیری مواد باطله معدن مس در بتن محصورشده قادر به بهبود مقاومت و شکل‌پذیری آن نسبت به بتن معمولی است. در این خصوص یک مدل تحلیلی برای رفتار تنش- کرنش بتن محصورشده حاوی مواد باطله ارائه ‌شده است.}, keywords_fa = {رفتار تنش- کرنش بتن,مواد باطله معدن,مواد زائد جایگزین سیمان,بتن سبز}, url = {https://ceej.tabrizu.ac.ir/article_9098.html}, eprint = {https://ceej.tabrizu.ac.ir/article_9098_1cae971ed30131138d6b6074ebc37bb0.pdf} } @article { author = {Babaee, Reza and Jabbari, Ehsan and Khosravi Babadi, Mohsen}, title = {Developing a New Semi- Analytical Method for Solving Elastodynamic Problems in the Frequency Domain}, journal = {Journal of Civil and Environmental Engineering}, volume = {51.2}, number = {103}, pages = {21-28}, year = {2021}, publisher = {Dean of Faculty of Civil Engineering}, issn = {2008-7918}, eissn = {2717-4077}, doi = {10.22034/jcee.2019.9086}, abstract = {In this paper, a new semi-analytical method is developed for analyzing concrete gravity dams in the frequency domain. Among different numerical methods, the finite element method (FEM), the boundary element method (BEM), and the scaled boundary finite element method (SBFEM) are more popular. BEM requires basically reduced surface discretization and may be considered as an appealing alternative to FEM for elastodynamic problems but requires fundamental solution of the governing differential equations. Although coefficient matrices of BEM are much smaller than those of FEM, they are routinely non-positive definite, non-symmetric, and fully populated. The SBFEM combines the advantages of the FEM and the BEM. The SBFEM is a semi-analytical method for solving partial differential equations by transforming the governing partial differential equations to ordinary differential equations. In the SBFEM, similar to the BEM, the boundary of the problem’s domain is discretized, while no fundamental solution is required. A modified form of the SBFEM with diagonal coefficient matrices has been proposed (Fakharian amd Khodakarami, 2015) for solving elastodynamic problems in the time domain. In this study, the semi-analytical approach for solving elastodynamic problems in the frequency domain has been applied, the governing equations in local coordinate system has been developed and two concrete gravity dams with rigid foundations and empty reservoir have been analyzed under the earthquake harmonic load.}, keywords = {Elastodynamic problems,Diagonal coefficient matrix,Concrete gravity dam,Frequency domain}, title_fa = {توسعه یک روش نیمه‌تحلیلی جدید برای حل مسائل الاستودینامیک در حوزه فرکانس}, abstract_fa = {هدف پژوهش حاضر، توسعه یک روش نیمه‌تحلیلی جدید به‌منظور آنالیز دینامیکی سدهای بتنی وزنی می‌باشد. در این روش، ماتریس‌های ضرایب دستگاه معادلات دیفرانسیل حاکم با استفاده از چندجمله‌ای‌های مرتبه بالای لاگرانژ (توابع نگاشت)، توابع شکل ویژه، روش انتگرال‌‌گیری عددیGauss-Lobatto- Legendre و روند تولید فرم انتگرالی با استفاده از روش باقی­مانده‌های وزن‌دار، به‌صورت قطری استخراج می‌شود. این امر و نیز گسسته‌سازی مسئله با یک بعد کم­تر از فضای اصلی، باعث کاهش قابل‌توجه حجم محاسبات نسبت به سایر روش‌ها می‌شود. در این پژوهش برای اولین بار به کمک ابزارهای مذکور، معادله حاکم بر مسائل الاستودینامیک با تحریک پایه (بار زلزله) در حوزه فرکانس با انتقال به فضای محلی استخراج و روند حل آن بیان شد. هم‌چنین به‌منظور سنجیدن توانایی و دقت روش حاضر در حل این دسته از مسائل، دو سد وزنی بتنی با مخزن خالی تحت تحریک هارمونیک پایه آنالیز گردید. مقایسه‌ نتایج این روش با سایر روش‌ها نشان می‌دهد که روش حاضر دارای دقتی بالا توأم با استفاده از حداقل درجات آزادی غیردرگیر برای آنالیز دینامیکی مسائل بزرگ‌مقیاس همچون سدها می‌باشد.}, keywords_fa = {مسائل الاستودینامیک,ماتریس ضرایب قطری,سد بتنی وزنی,حوزه فرکانس}, url = {https://ceej.tabrizu.ac.ir/article_9086.html}, eprint = {https://ceej.tabrizu.ac.ir/article_9086_514651b26f35288adaa1db78d1b26ae1.pdf} } @article { author = {Pourtaghi, Afshin and Saleh Jalali, Reza}, title = {Iran Accelerograph Data Contraction Using Wavelet Analysis}, journal = {Journal of Civil and Environmental Engineering}, volume = {51.2}, number = {103}, pages = {29-39}, year = {2021}, publisher = {Dean of Faculty of Civil Engineering}, issn = {2008-7918}, eissn = {2717-4077}, doi = {10.22034/jcee.2020.25993.1631}, abstract = {The main purpose of this paper is to find an approximation of Iran strong motion records by a relatively small number of pulses (i.e. wavelets in an orthogonal wavelet family) considering wavelet importance in introducing the nature of ground strong motion. The Coiflet 5 wavelet family is used, which is orthogonal, smooth and nearly symmetric. Such representation is obtained by the expansion of velocity in orthogonal wavelet series using the Fast Wavelet Transform, and approximation by only the largest energy terms in the series. The goodness of the approximation is examined. The efficiency of the procedure is assessed by comparison some seismic indices such as input seismic energy, peak power and nonlinear oscillator collapse time which are achieved from the main and contracted signals.}, keywords = {Earthquake,Wavelet analysis,Energy,Power,nonlinear seismic response,collapse time}, title_fa = {فشرده سازی داده‌های شتاب‌نگاری ثبت‌شده در ایران توسط آنالیز موجک}, abstract_fa = {هدف از این تحقیق ارائه داده‌های شتاب‌نگاری ثبت‌ شده در ایران به‌صورت فشرده توسط موجک می‌باشد. با توجه به امکان فشرده‌سازی داده‌های لرزه‌ای و ارائه آن‌ها به‌صورت مجموع آثار تعدادی از موجک‌ها و اهمیتی که این موجک‌ها در شناخت طبیعت حرکت زمین و بسط الگوریتم‌های جدید جهت ساخت زلزله‌های مصنوعی دارند، در این مقاله فشرده‌سازی 806 رکورد سه مؤلفه‌ای حاصل از زلزله‌های رخ‌داده در ایران طی سال‌های 1975 تا 2013 با استفاده از تبدیل موجک سریع انجام‌گرفته است. فشرده‌سازی داده‌ها با استفاده از بسط سرعت حرکت زمین برحسب سری موجک‌های متعامد و متعاقباً بازسازی سیگنال اصلی توسط موجک‌هایی که دارای حداکثر انرژی می‌باشند صورت گرفته است. در این راستا از موجک کویفلت 5 که متعامد، هموار و تقریباً متقارن است جهت انجام تقریب‌های حاصل از بازسازی 1%، 2%، 4%، 6%، 8% و 12% از بیش­ترین ضرایب مربوط به بسط استفاده گردیده است. کارایی روش به­کار گرفته‌شده از طریق مقایسه تعدادی از شاخص‌های لرزه‌ای حاصل از سیگنال‌های اصلی و فشرده‌سازی شده و بررسی میزان خطاها مورد ارزیابی قرارگرفته است. شاخص‌های به­کار گرفته‌شده شامل انرژی ورودی زلزله، حداکثر توان ورودی زلزله و زمان خرابی نوسانگر غیرخطی می‌باشند. نتایج حاکی از میزان همبستگی بالا میان شاخص‌های حاصل از داده‌های اصلی و فشرده‌سازی شده با در نظر گرفتن تعداد کمی از موجک‌ها می‌باشد.}, keywords_fa = {زمین‌لرزه,تبدیل موجک,انرژی,توان,پاسخ لرزه‌ای غیرخطی,زمان خرابی}, url = {https://ceej.tabrizu.ac.ir/article_11261.html}, eprint = {https://ceej.tabrizu.ac.ir/article_11261_a436b28b8c9d3a16cae357a7af1c5ff9.pdf} } @article { author = {Haeri, Hadis and Pajoum Shariati, Farshid and Qaderi, Farhad}, title = {Using of Moving Bed Biofilm Reactor Containing Kaldness Media in Treatment of Produced Water}, journal = {Journal of Civil and Environmental Engineering}, volume = {51.2}, number = {103}, pages = {41-49}, year = {2021}, publisher = {Dean of Faculty of Civil Engineering}, issn = {2008-7918}, eissn = {2717-4077}, doi = {10.22034/jcee.2020.25824.1621}, abstract = {The biological treatment process is considered the most important method in wastewater treatment. The role played by a Biological treatment reactor is to prepare suitable conditions for biological growth of bacteria to remove the contaminants. Various types of reactors (attached growth (biofilm) and suspended growth) are used in biological treatment of wastewater. Moving bed biofilm reactor is the most important of biofilm reactors. Moving bed biofilm reactor (MBBR) was used rare for treatment of wastewater containing petroleum component like as produce water. In this research, MBBR was used for investigation of removal efficiency of crude oil component, those are in produce water.}, keywords = {Produced Water,biofilm,Media,COD,Retention time,Filling Ratio}, title_fa = {استفاده از راکتور بیولوژیکی MBBR حاوی مدیایKaldness در تصفیه نفتاب}, abstract_fa = {از راکتور بیوفیلمی با بستر متحرک (MBBR) برای تصفیه فاضلاب حاوی ترکیبات نفتی کم­تر استفاده شده است. در این تحقیق از راکتور مذکور جهت مطالعه راندمان حذف ترکیبات موجود در نفت خام موجود در آب همراه نفت استفاده شده است. در این تحقیق ابتدا میکروارگانیسم­ها در یک بازه 70 روزه بر روی آکنهKaldness  از نوع k1 بیوفیلم تشکیل داده و با آلاینده در COD برابر با 100 میلی­گرم بر لیتر سازگار گردیدند. سپس در این راکتور اثر پارامترهای زمان ماند (8، 12، 24، 48 و 72 ساعت)، غلظت COD اولیه (2500- 200 میلی­گرم بر لیتر) و درصد پرشدگی مدیا (30، 50 و 70 درصد) بررسی گردید. بهینه­ترین راندمان حذف در COD ورودی برابر با 200 میلی­گرم بر لیتر در زمان ماند 48 ساعت و درصد پرشدگی 50 درصد بود و در این شرایط راندمان حذف COD برابر با 72 درصد به­دست آمد. کشت میکروبی و رنگ­آمیزی گرم، حضور میکروارگانیسم­های گرم منفی و مثبت متنوعی را نشان داد. بررسی سینتیکی نتایج بیولوژیکی این تحقیق نشان می‌دهد که MBBR ضریب همبستگی مناسبی برای مدل مرتبه دوم در حذف آلاینده­های نفت خام دارد.}, keywords_fa = {نفتاب,بیوفیلم,آکنه,COD,زمان ماند,درصد پرشدگی}, url = {https://ceej.tabrizu.ac.ir/article_11245.html}, eprint = {https://ceej.tabrizu.ac.ir/article_11245_205f8ec00de386b7cb27da4b8f4fdece.pdf} } @article { author = {Hayati Raad, Hossein and Bagheri, Saman}, title = {Dynamic Behavior Evaluation of FPS Isolated Liquid Storage Tanks Subjected to Pulse-like Excitations}, journal = {Journal of Civil and Environmental Engineering}, volume = {51.2}, number = {103}, pages = {51-61}, year = {2021}, publisher = {Dean of Faculty of Civil Engineering}, issn = {2008-7918}, eissn = {2717-4077}, doi = {10.22034/jcee.2019.9476}, abstract = {On-grade liquid storage tanks are vulnerable to strong ground motions, as some recent major earthquakes have demonstrated. Seismic base isolation is one of the most efficient techniques to mitigate earthquake damage in these structures. Among the various base isolation devices, the Friction Pendulum System (FPS) provides several benefits: the independence of isolation period from superstructure mass/weight which can be varied in some structures such as liquid storage tanks, re-centering related to the spherical surface, and high energy dissipation based on velocity-dependent friction (Mokha et al., 1991; Zayas et al., 1990). Although the base isolation has been known as an efficient technique to protect civil structures, the performance of base-isolated structures under near-fault ground motions containing long-period pulses has been questioned in recent years. In this paper, a parametric study is carried out to investigate the seismic behavior of FPS isolated liquid storage tanks under near-fault ground motions represented by analytical pulse-like functions. For this purpose, the liquid storage tanks are modeled using equivalent mechanical models and then dynamic analyses of the models are done using pulse-like excitations. The effects of the tank type, isolator specifications and the input excitation characteristics on the various response parameters are investigated.}, keywords = {Liquid storage tanks,Base isolation,Friction pendulum system,Near-fault earthquake,Pulse-like excitation}, title_fa = {ارزیابی رفتار دینامیکی مخازن ذخیره مایعات جداسازی شده با سیستم آونگ اصطکاکی تحت تحریکات پالس‌گونه}, abstract_fa = {سیستم‌های جداسازی به عنوان یکی از روش‌های مؤثر و معمول برای کاهش خسارات انواع سازه‌ها از جمله مخازن ذخیره مایعات شناخته شده است. با این وجود، این نوع سازه‌های جداسازی شده تحت تحریکات پالس‌گونه و پریود بلند زلزله‌های حوزه نزدیک گسل، در معرض آسیب‌های احتمالی هستند. هدف از این تحقیق ارزیابی پارامتریک و جامع پاسخ لرزه‌ای مخازن ذخیره مایعات جداسازی شده با سیستم آونگ اصطکاکی (FPS) تحت تحریکات پالس‌گونه می‌باشد. برای این منظور ابتدا مخازن جداسازی شده با مدل‌های مکانیکی معادل شبیه‌سازی شده و سپس آنالیز دینامیکی غیرخطی آن‌ها تحت چنین تحریکاتی انجام می‌شود. تأثیر متغیرهای مهم پالس‌های ورودی و سیستم جداسازی مانند دامنه پالس، پریود پالس، تعداد پالس، پریود جداسازی، ضریب اصطکاک جداسازی و نیز تأثیر نسبت ‌ابعادی مخزن ارزیابی می‌شود. نتایج حاصله بیانگر این است که با اضافه کردن سیستم جداسازی، می‌توان پاسخ‌های لرزه‌ای مخازن را تحت تحریکات پالس‌گونه معادل زلزله‌های حوزه نزدیک گسل در محدوده مطلوبی کنترل کرد. همچنین مشاهده شد که جابجایی قائم سطح آزاد سیال با توجه به بالا بودن زمان تناوب نوسانی تحت تأثیر تحریکات با پریود بلند است؛ درصورتی­که لنگر واژگونی مخزن تحت تأثیر و تشدید پالس‌های با پریود نزدیک به پریود جداساز هستند. با تغییر مشخصه‌های سیستم جداسازی مخزن و مشاهده تأثیر آن‌ها در حداکثر پاسخ‌های در نظر گرفته­شده، توصیه‌هایی برای انتخاب مناسب آن‌ها در مجاورت گسل‌های فعال صورت گرفت.}, keywords_fa = {مخازن ذخیره مایعات,جداسازی لرزه‌ای,سیستم آونگ اصطکاکی,زلزله حوزه نزدیک گسل,تحریک پالس‌گونه}, url = {https://ceej.tabrizu.ac.ir/article_9476.html}, eprint = {https://ceej.tabrizu.ac.ir/article_9476_ba2058615e071157adb4ff88705dbcc9.pdf} } @article { author = {Zahiri, Javad and Ashnavar, Mehran}, title = {River Flow Simulation by Integrating Numerical Methods and Satellite Images}, journal = {Journal of Civil and Environmental Engineering}, volume = {51.2}, number = {103}, pages = {63-72}, year = {2021}, publisher = {Dean of Faculty of Civil Engineering}, issn = {2008-7918}, eissn = {2717-4077}, doi = {10.22034/jcee.2019.9090}, abstract = {Numerical models have the ability to simulate river flow by using mathematical relations under certain initial and boundary conditions. Investigating the capability of different models for simulating flow characteristics in a river reach such as flow depth, velocity and shear stress in river banks are one of the basic needs in river engineering. However, from the practical point of view, the minimum need for field information, the small computation, and the degree of trust of the application of mathematical models in the conditions of natural rivers is of great importance. The aim of this study is to integrate GIS and HEC-GeoRAS with HEC-RAS model in order to simulate the hydraulic parameters of the Karun River in Khuzestan province.}, keywords = {River flow simulation,numerical model,Satellite images,River Bend,Nash-Sutcliffe coefficient}, title_fa = {کارایی HEC-RAS و GIS در شبیه‌سازی یک‌بعدی هیدرودینامیک جریان در رودخانه}, abstract_fa = {مدل­ سازی جریان رودخانه یکی از پیچیده­ ترین مسائل هیدرولیک به­ حساب می­ آید و انجام آن در تمامی پروژه­ های مهندسی رودخانه ضرورت دارد. تاکنون مدل ­های متعددی جهت مدل­ سازی هیدرولیک رودخانه ارائه شده­ اند که می­ توانند جریان را به‌صورت یک، دو و یا سه‌بعدی شبیه ­سازی کنند. در این تحقیق با توجه به زمان­بر بودن اجرای مدل‌های دو و سه‌بعدی از مدل یک‌بعدی جهت شبیه ­سازی جریان در رودخانه کارون و در حدفاصل ایستگاه ملاثانی تا فارسیات استفاده شده است. با توجه به ماهیت یک‌بعدی مدل ریاضی مورد استفاده و عدم دقت مناسب در بعضی از قسمت­ های رودخانه که ماهیت جریان به صورت دوبعدی می­ باشد، از تصاویر ماهواره­ای و شبیه­ سازی مقاطع به صورت سه ­بعدی استفاده گردید. براساس نتایج به­ دست آمده، نه تنها تفاوت محسوسی در مدت زمان اجرای مدل یک­ بعدی صورت نگرفته است، بلکه مدل توانسته است با توجه به توپوگرافی تعریف شده، مقادیر پارامترهای هیدرولیکی را در نقاط مختلف رودخانه ارائه دهد. نتایج شبیه­ سازی جریان در ایستگاه اهواز که به­ عنوان ایستگاه شاهد انتخاب گردید، نشان می دهد که مدل ارتفاعی به­ کار رفته در مدل ریاضی باعث افزایش دقت نتایج مدل­ سازی گردیده است. یکی از موارد مهم در شبیه ­سازی جریان مربوط به قوس­ های رودخانه بوده که با استفاده از تکنیک به ­کار گرفته شده، هیدرولیک جریان در قوس­ ها با دقت مناسبی شبیه­ سازی شده است. معیارهای آماری مورد استفاده در این تحقیق از قبیل جذر میانگین مربعات خطا و ضریب ناش- ساتکلیف نشان­دهنده دقت قابل قبول مدل ریاضی در شبیه سازی جریان در رودخانه کارون می­باشد.}, keywords_fa = {مدل‌سازی جریان رودخانه,مدل عددی,تصاویر ماهواره‌ای,قوس رودخانه,ضریب ناش- ساتکلیف}, url = {https://ceej.tabrizu.ac.ir/article_9090.html}, eprint = {https://ceej.tabrizu.ac.ir/article_9090_12a5af40e3fe824914f5cbe75be83db1.pdf} } @article { author = {Abedi, Karim and Poursharifi, Maryam and Chenaghlou, Mohammad Reza}, title = {Stability Analysis of Double Layer Barrel Vaults Equipped with Accordion Force Limiting Device}, journal = {Journal of Civil and Environmental Engineering}, volume = {51.2}, number = {103}, pages = {73-82}, year = {2021}, publisher = {Dean of Faculty of Civil Engineering}, issn = {2008-7918}, eissn = {2717-4077}, doi = {10.22034/jcee.2019.9475}, abstract = {Space structures are the best solution for covering large areas with few or no intermediate supports. These structures have advantages such as light weight, delicate appearance and ease of erection. Despite these advantages, space structures suffer from progressive collapse due to buckling of compression members. In order to prevent the progressive collapse and improve the double layer space structure’s response, several mechanisms have been developed including force limiting devices (FLDs). The available FLDs have never been practically applied to space structures due to serious drawbacks. To improve the previous FLD’s performance, an innovative type of force limiting device is introduced in this study. This force limiting device which is entitled as Accordion Force Limiting Device (AFLD) is designed based on the idea of buckling restrained braces (BRB). To evaluate the efficiency of this new device, a whole steel accordion force limiting device is designed and constructed to be tested under uniaxial compressive loading. Numerical models are also developed to investigate the effect of applying AFLD on stability of double layer barrel vaults. A parametric study is carried out to study the effect of AFLD, considering Length to span ratio and rise to span ratio in double layer barrel vaults. Results indicated that applying AFLD to critical compression members improves the stability behavior noticeably.}, keywords = {Accordion force limiting device,Double layer barrel vault,Stability analysis,FE analysis,Buckling}, title_fa = {تحلیل پایداری چلیک فضاکار دولایه با ابزار محدودگر نیروی آکاردئونی}, abstract_fa = {سازه ­های فضاکار به گروهی از سازه­ها اطلاق می ­شود که عملکرد غالب سه ­بعدی دارند. این سازه­ ها مزایای متعددی دارند که از آن جمله می­توان به وزن کم، سرعت و سهولت اجرا و زیبایی اشاره کرد. علیرغم این مزایا، سازه­های فضاکار از مشکل خرابی پیش­رونده رنج می­ برند. خرابی پیش­رونده در این نوع سازه­ ها عمدتاً به دلیل کمانش اعضای فشاری اتفاق می­افتد. به منظور اصلاح رفتار تند پس­کمانشی اعضای فشاری در سازه­ های فضاکار، ایده استفاده از ابزارهای محدودگر نیرو مطرح شده و نمونه­ هایی نیز در مقیاس آزمایشگاهی ساخته شده است. عدم تأمین نیروی حدی کافی و همچنین صعوبت اجرا در عمل را می­توان از جمله مواردی برشمرد که باعث شده است تا به حال استفاده عملی از ابزارهای محدودگر نیرو ممکن نشود. به منظور جبران این ناکارآمدی و همچنین بهبود مشخصه ­های رفتاری ابزار محدودگر نیرو، در این مطالعه ابزار محدودگر نیروی آکاردئونی معرفی شده است. این ابزارکه با الهام از بادبند ضد کمانش طراحی شده، در مطالعه حاضر مورد طراحی، ساخت و آزمایش قرار گرفته است. به منظور بررسی تأثیر ابزار محدودگر نیروی آکاردئونی بر پایداری شبکه دولایه مطالعات عددی توسط نرم افزار المان محدود ABAQUS انجام شده است. مطالعات عددی شامل مطالعات پارامتریک با در نظر گرفتن نسبت طول به دهانه و نسبت ارتفاع به دهانه در چلیک ­های دولایه است. نتایج نشان می­دهد که استفاده از ابزار محدودگر نیروی آکاردئونی در تمامی مدل های شبیه ­سازی شده در مطالعه حاضر، منجر به بهبود قابل ملاحظه در رفتار پایداری چلیک دولایه می­شود.}, keywords_fa = {ابزار محدودگر نیروی آکاردئونی,چلیک فضاکار دولایه,تحلیل پایداری,تحلیل اجزای محدود,کمانش}, url = {https://ceej.tabrizu.ac.ir/article_9475.html}, eprint = {https://ceej.tabrizu.ac.ir/article_9475_0b34e3b034441f539d07b68412420d7e.pdf} } @article { author = {Aalipour Ardi, Mehdi and Jabbarian Amiri, Bahaman}, title = {Investigating the Effects of Land Use/Land Cover Composition on River Water Quality}, journal = {Journal of Civil and Environmental Engineering}, volume = {51.2}, number = {103}, pages = {83-93}, year = {2021}, publisher = {Dean of Faculty of Civil Engineering}, issn = {2008-7918}, eissn = {2717-4077}, doi = {10.22034/jcee.2019.9091}, abstract = {Point and nonpoint sources of pollution both affect water quality (Wang and Choi, 2005). Among the factors of non-point source, land use and land cover are the most important resources, which numerous research studied relationships between land use and water quality in different watersheds (Jun, 2011; Seeboonruang, 2012; Jun, 2013). There is a significant correlation between land use and water quality (Su et al. 2012; Wan et al., 2014) and this relationship is influenced by types and their spatial patterns land use. Landscape metrics have been used since 1980s to determine the degree of heterogeneity of spatial and landscape structure, including composition and configuration. Three features of the landscape are structure, composition and configuration based on landscape ecology (Amiri et al., 2016; Forman and Godron, 1986), which can be measured and analyzed based on the specific landscape metrics (Rutledge, 2003). Landscape structure has a great influence on the flow of nutrients at the catchment area (Amiri and Nakane 2009; Turner and Rabalais 2003). Due to the fact that non-point pollution has contributed to water pollution, the effect of non-point sources due to the change in landscape patterns is very important (Basnyat et al. 1999; Bhaduri, 2000). Moreover, landscape shows spatial heterogeneity of specific basin, and different patterns can be observed at various scales (Herold et al., 2005). A better understanding of the relationship between landscape metrics and water quality indicators can increase efforts in water management and research (Kearns et al., 2005).}, keywords = {Rivers water quality,Landscape metrics,Landscape Structure,Land use,Multivariate linear regression}, title_fa = {بررسی تأثیر ترکیب کاربری سرزمین و سنجه‌های ساختار سیمای سرزمین در مدل‌سازی کیفیت آب رودخانه‌ها (مطالعه موردی: استان اردبیل)}, abstract_fa = {در دهه‌های اخیر، کیفیت آب رودخانه‌ها تحت تأثیر عوامل متعددی که ناشی از منابع آلودگی نقطه‌ای و غیر نقطه‌ای می‌باشد، قرار گرفته است. کاربری‌های سرزمین و تغییرات حاصله از آن‌ها در طول زمان، بیشترین تأثیر را بر روی کیفیت آب رودخانه‌ها داشته‌اند. به‌جز کاربری سرزمین، تحلیل ناهمگونی مکانی و ساختاری سیمای سرزمین نیز می‌تواند در بیان و تحلیل تغییرات کیفیت آب مؤثر باشد. در مطالعه حاضر، به‌منظور مدل‌سازی روابط بین ویژگی ترکیب (درصدکاربری سرزمین) و سنجه‌های ساختار سیمای سرزمین با تغییرات کیفیت آب در استان اردبیل از مدل‌سازی رگرسیون چند متغیره گام‌به‌گام استفاده شد. آزمون شاپیرو در سطح معناداری 05/0 جهت بررسی نرمال بودن داده‌های کیفیت آب مورد بررسی قرار گرفت. سپس از آزمون همبستگی اسپیرمن جهت بررسی ارتباط بین متغیرها استفاده شد.پس از برازش مدل­ ها، آزمون آکائیکه جهت تعیین بهینه‌ترین مدل برای هر پارامتر کیفیت آب مورد استفاده قرار گرفت. نتایج مطالعه نشان داد که سنجه‌های سیمای سرزمین توانسته‌اند بیش از 80 درصد واریانس را در تغییرات متغیرهای کیفیت آب در رودخانه­ های مورد مطالعه در استان اردبیل نشان دهند. هم‌چنین کاربری‌های کشاورزی، شهری و دیم هم در متغیرهای ویژگی ترکیب (درصد) کاربری سرزمین و هم سنجه‌های ساختار سیمای سرزمین بیشترین تأثیر را در کیفیت آب رودخانه‌ها داشته‌اند. در نهایت برای صحت­سنجی مدل‌­ها، از یازده سنجه شامل سنجه‌های برآورد خطای مطلق مدل، تحلیل کارایی مدل و خطای نسبی مدل استفاده شده است که بر اساس نتایج آن، مدل­های ابداعی برای هریک از متغیر کیفیت آب صحت قابل قبولی از خود نشان دادند.}, keywords_fa = {کیفیت آب رودخانه,سنجه‌های سیمای سرزمین,ویژگی ساختار سیمای سرزمین,کاربری سرزمین,رگرسیون خطی چندمتغیره}, url = {https://ceej.tabrizu.ac.ir/article_9091.html}, eprint = {https://ceej.tabrizu.ac.ir/article_9091_fd381a4e24ae5342d298cb3cb874d07d.pdf} } @article { author = {Farzad, Keyvan and Gholizadeh, Saeed}, title = {Layout Optimization of Outrigger Braced System in Steel Tall Structures Using Meta- Heuristic Algorithms}, journal = {Journal of Civil and Environmental Engineering}, volume = {51.2}, number = {103}, pages = {95-105}, year = {2021}, publisher = {Dean of Faculty of Civil Engineering}, issn = {2008-7918}, eissn = {2717-4077}, doi = {10.22034/jcee.2019.9478}, abstract = {As the height of building increases, requirements of structural stiffness and stability become more important than the strength criterion. Each tall structure basically behaves like a vertical cantilever under lateral loads and the outrigger-braced system is a favorable system in tall structures (Taranath, 1998). This type of structure has a central core connected to outer columns by outrigger trusses or strong girders. The position of outrigger-braced system has a significant impact on the structural efficiency. Therefore, determining the position of outrigger braces is an important part of design process; it is mainly done experimentally and does not lead to good economic results. In this study, the particle swarm optimization (PSO), modified dolphin echolocation (MDE), Enhanced colliding bodies optimization (ECBO) and grey wolf optimization (GWO) algorithms are utilized to determine the optimum position of outrigger-braced systems in tall steel structures.}, keywords = {tall building,meta-heuristic algorithm,Layout Optimization}, title_fa = {تعیین موقعیت بهینه سیستم مهاربند بازویی درقاب‌های فولادی بلند با استفاده از الگوریتم‌های فراکاوشی}, abstract_fa = {تأمین سختی مناسب و بخصوص سختی جانبی سازه، از پارامترهای اساسی طراحی ساختمان­ های بلند است. از جمله سیستم ­های مورد اقبال در سازه­ های بلند، سیستم سازه­ای با مهار بازویی است. به واسطه اتصال هسته مرکزی به ستون­ های محیطی توسط مهارهای بازویی میزان مشارکت اعضا در تحمل نیروهای جانبی افزایش می­ یابد. سازه­ های با مهار بازویی در چند تراز نسبت به سازه­ های تک بازویی از مقاومت خمشی بیشتری برخوردارند در این راستا موقعیت سیستم­ های سخت­ کننده، تأثیر به­ سزایی در بهبود عملکرد و دستیابی به طرح­ های اقتصادی خواهد داشت. تعدد الزامات آئین ­نامه ­ای و اعضای سازه مستلزم به ره­گیری از الگوریتم­ های فراکاوشی در روند بهینه ­سازی است در این تحقیق با به­ کارگیری چهار الگوریتم فراکاوشی بهینه ­سازی در دو سازه 24 و 36 طبقه کارآیی هر الگوریتم در بهینه ­سازی سایز و موقعیت مهارهای بازویی مشخص و نتایج به­ دست آمده حاکی از تأثیر موقعیت مهار در دستیابی به سازه بهینه می­ باشد به طوری که با تخصیص یک مهار به ازای هر دوازده طبقه و تثبیت یکی از آن­ها در طبقه آخر هر سازه، موقعیت بهینه مهار دوم سازه 24 طبقه در طبقه دوازدهم و مهارهای سازه 36 طبقه در طبقات یازدهم و بیست و سوم به ­دست می ­آید.}, keywords_fa = {ساختمان بلند,الگوریتم فراکاوشی,بهینه‌یابی موقعیت}, url = {https://ceej.tabrizu.ac.ir/article_9478.html}, eprint = {https://ceej.tabrizu.ac.ir/article_9478_3e37faa206056d5fcca13596ed1a94d2.pdf} } @article { author = {Narjabadifam, Peyman and Chaei-Asl-Tabrizi, Iraj and Bagheri-Mollahajlu, Mina}, title = {Evaluation of the Need for Seismic Microzonation in Bonab County based on Regional Considerations and Probabilistic Earthquake Hazard Analysis from the Vicinity of Urmia Lake toward the Hillsides of Sahand Mountain}, journal = {Journal of Civil and Environmental Engineering}, volume = {51.2}, number = {103}, pages = {107-126}, year = {2021}, publisher = {Dean of Faculty of Civil Engineering}, issn = {2008-7918}, eissn = {2717-4077}, doi = {10.22034/jcee.2020.21717.1529}, abstract = {Earthquake can be considered as the most important environmental excitation because of its massive destructivity within a short period of time. Prediction of earthquakes is still a dilemma (Wang, 2015). The questions are also available about the effectiveness of prediction, if possible. It is clear that the society will not be safe with only the prediction of earthquakes. Earthquake protection of structures is required as the main solution. The quality of this protection depends mainly on the quality of the estimation of possible earthquakes. In this regard, earthquake hazard analysis should be followed by seismic microzonation in order to account for the site effects. Evaluation of the need for such a detailed study is carried out for Bonab County, which is the second industrial city in the province of East Azerbaijan after the capital city (Tabriz), being also important because of its cultural heritage. The other motivation for this study comes from the change in the seismicity of the neighboring region referred to the 4th edition of the Iranian code of practice for seismic resistant design of buildings (Standard No. 2800) when compared with the 3rd edition of this standard (PCIRC, 2007).}, keywords = {Seismic microzonation,Earthquake hazard analysis,Probabilistic method,Zmap,Kijko,EZ-FRISK}, title_fa = {ارزیابی نیاز به ریزپهنه‌بندی لرزه‌ای در شهرستان بناب براساس ملاحظات منطقه‌ای و تحلیل احتمالی خطر زلزله از مجاورت دریاچۀ ارومیه تا دامنۀ کوه سهند}, abstract_fa = {ریزپهنه ­بندی لرزه­ ای شهرستان بناب با مختصات مرکزی N3403°/37 و E0561°/46 از طریق انجام تحلیل احتمالی خطر زلزله در محدوده­ای به شعاع 150 کیلومتر از مرکز شهر و اعمال تأثیرات شرایط ساختگاهی از مجاورت دریاچه ارومیه تا دامنه کوه­ های سهند نیازسنجی گردیده است. به این منظور، اطلاعات لرزه­ ای و مهلرزه­ای منطقه بررسی شده­ اند. تحلیل­ های آماری پس از یکسان­ سازی داده ­ها انجام و عمق سایزموژنیک منطقه بر اساس فراوانی زلزله ­ها تعیین شده است. چشمه­ های لرزه ­ای با مطالعه گسل ­های فعال منطقه و نیز زلزله ­های روی داده در آن شناسایی شده ­اند. توان لرزه ­ای چشمه ­ها محاسبه و پارامترهای لرزه ­ای به کمک نرم ­افزارهای Zmap و Kijko به ­ترتیب با دو روش Gutenberg-Richter و Kijko-Sellevoll تعیین گردیده­اند. تحلیل خطر با استفاده از نرم ­افزار EZ-FRISK برای دوره ­های بازگشت 10، 475، 975 و 2475 سال انجام و شتاب­ های حداکثر سنگ بستر در این دوره­ های بازگشت به­ دست آمده اند. عوامل ژئوتکنیک و توپوگرافی منطقه بررسی و تأثیرات آن­ها در شتاب زمین ارزیابی شده­اند. بر اساس نتایج، بیشینه شتاب سنگ بستر در منطقه تقریباً به طور ثابت g035/0 برای زلزله ­های با احتمال فراگذشت %5/99 در 50 سال، g21/0 برای زلزله ­های با احتمال فراگذشت %10 در 50 سال، g28/0 برای زلزله ­های با احتمال فراگذشت %5 در 50 سال و g39/0 برای زلزله ­های با احتمال فراگذشت %2 در 50 سال به ­دست آمده­ اند. شتاب مبنای ویرایش چهارم استاندارد 2800 با توجه به مطالعات لرزه ­ای جدید هم مورد قبول ارزیابی گردیده، ریز­پهنه ­بندی لرزه­ ای به علت تغییرات بارز شتاب زمین در اثر اعمال ملاحظات ژئوتکنیک و توپوگرافی منطقه مورد نیاز تشخیص داده شده و 6 ریزپهنه پیشنهاد شده ­اند.}, keywords_fa = {ریزپهنه‌بندی لرزه‌ای,تحلیل خطر زلزله,روش احتمالی,Zmap,Kijko,EZ-FRISK}, url = {https://ceej.tabrizu.ac.ir/article_11252.html}, eprint = {https://ceej.tabrizu.ac.ir/article_11252_b224dec780e603a9ceee9dc757c2e1ee.pdf} } @article { author = {Dehghan, Yashar and Dabiri, Rouzbeh}, title = {Effects of Waste Plastic Strips (PET) on Improvement of Fine-grained Soil}, journal = {Journal of Civil and Environmental Engineering}, volume = {51.2}, number = {103}, pages = {127-139}, year = {2021}, publisher = {Dean of Faculty of Civil Engineering}, issn = {2008-7918}, eissn = {2717-4077}, doi = {10.22034/jcee.2019.9474}, abstract = {Geotechnical and engineering structures transfer their loads to soil by foundation. Therefore, structures should be constructed on soil with high bearing capacity. Demand for suitable soil in civil engineering projects is high, but soil with high quality in terms of bearing capacity provides from long distance and uses. Although, this operation is extensive and time consuming. Social, economical and environmental challenges have been caused researchers find new method for improving soil behavior in terms of bearing capacity and strength. In the other side, waste materials such as plastic, wood, glass and etc. in terms of high volume production due to urban development and urbanization with high cost in disposal and maintenance have been caused serious researches for application of recycled waste materials in soils for improvement performed. Polyethylene Terephthalate (PET) is one of the waste material which is permanent and causes environmental pollution. As regard to supply and demand of plastic waste (PET) is increasing, so recycling and re-use is one of the major purpose in engineering and environmental protection (John and Rodwan, 2012). Nowadays, about the use of waste plastic strip and PET different studies have been performed such as (Sivakumar Babu and Vasudevan, 2008), (Sivakumar Babu and Chouksey, 2011), (Dutta et al., 2012) and (Soltani-Jigheh, 2014) can be mentioned. Main idea of this research is evaluation of flexible waste plastic strips (PET=Polyethylene Terephthalate) effects on mechanical and geotechnical behavior of fine-grained soil.}, keywords = {Environmental geotechnic,Fine-grained soil,Waste plastic strip (PET),Improvement,Bearing capacity}, title_fa = {مطالعه تأثیر نوارهای زائد پلاستیک (PET) بر بهسازی خاک ریزدانه}, abstract_fa = {خاک‌های ریزدانه از جمله موضوع‌های مساله ساز در پروژه‌های عمرانی است. تغییر حجم ناشی از تغییر رطوبت در آن‌ها همواره موجب بروز خسارات فراوانی به سازه های ساخته شده بر روی آن‌ها می‌شود. بنابراین، بایستی با بکارگیری روش‌های مناسب خسارت‌های ناشی از تورم و تغییر رفتار خاک‌های ریزدانه را کاهش داد. روش‌های مختلف مکانیکی، شیمیایی و بیولوژیکی جهت تثبیت خاک‌های ریزدانه موجود می باشد. امروزه، استفاده از مصالح زائد بازیافتی با توجه به حجم بالای تولید آنها در اثر توسعه شهرنشینی و هزینه بالای دفع و نگهداری آنها یک روند مطالعاتی جدی را جهت کاربرد آنها در بهسازی مصالح ریزدانه بوجود آورده است. هدف از تحقیق حاضر، بررسی نوارهای زائد پلاستیک (PET) به عنوان یک ماده ضایعاتی باطله بر روی خواص مکانیکی و ژئوتکنیکی خاک‌ریزدانه می‌باشد. در این مطالعه، زائدات پلاستیک انعطاف پذیر با ابعاد 1×1 و 2×2 سانتی متر مربع و با درصدهای وزنی 5/0، 1 ، 5/1 و 2 با خاک ریزدانه منطقه جلفا بصورت تصادفی مخلوط گردیده و حصوصیات ژئوتکنیکی خاک‌ تثبیت شده مورد ارزیابی قرار گرفت. جهت انجام تحقیق حاضر، آزمون‌های آزمایشگاهی تراکم، مقاومت فشاری تک محوری، برش مستقیم (در حالت خشک و اشباع)، تحکیم و نفوذپذیری با ارتفاع متغیر انجام گرفت. نتایج بدست آمده از مطالعه نشان داد، میزان بهینه نوار زائد پلاستیک برابر 5/0 درصد وزنی و با ابعاد 1×1 سانتی متر می‌باشد. زیرا این مقدار باعث افزایش تراکم پذیری، توانایی باربری، کاهش تورم و نشست تحکیم و افزایش نفوذپذیری خک ریزدانه بهسازی شده گردیده است.}, keywords_fa = {ژئوتکنیک زیست محیطی,خاک ریزدانه,نوار زائد پلاستیک (PET),بهسازی,ظرفیت باربری}, url = {https://ceej.tabrizu.ac.ir/article_9474.html}, eprint = {https://ceej.tabrizu.ac.ir/article_9474_98a103817a2c2950ca7a46faccd6d0f9.pdf} } @article { author = {Dini, Mehdi}, title = {Performance Analysis of PSO Algorithm for Setting the Hazen Williams Coefficients of Water Distribution Network Models}, journal = {Journal of Civil and Environmental Engineering}, volume = {51.2}, number = {103}, pages = {141-152}, year = {2021}, publisher = {Dean of Faculty of Civil Engineering}, issn = {2008-7918}, eissn = {2717-4077}, doi = {10.22034/jcee.2019.9119}, abstract = {Gradually, with the urban population growth and development of cities, water distribution networks (WDNs) gain significant importance. So the need for computerized modeling of WDNs is felt more than ever to understand the behavior of these systems. The most important problem with modeling of WDNs is consistency between the calculated and measured data. Setting the coefficients of the model via measured data is necessary. Model parameters include Hazen-Williams coefficients in the pipes, base demand and demand pattern coefficients at the nodes. The calculated and measured data mainly include pressure head at nodes, tank levels, and flow in pipes, that can be considered either in steady state or in an extended period condition. The aim of this paper is to investigate the performance of PSO algorithm for setting the Hazen Williams coefficients of WDN Models. For this purpose, five models of the PSO algorithm and three models of the ACO algorithm were made. The proposed method tested on a two-loop test example and a real water distribution network.}, keywords = {Ahar water distribution network,PSO Algorithm,Hazen Williams Coefficients,ACO Algorithm}, title_fa = {بررسی کارایی الگوریتم دسته ذرات در تنظیم ضرایب هیزن‌ ویلیامز مدل شبکه توزیع آب}, abstract_fa = {هدف این مقاله بررسی کارایی الگوریتم دسته ذرات در تنظیم ضرایب هیزن ویلیامز لوله‌های شبکه توزیع آب می‌باشد. برای مقایسه، الگوریتم جامعه مورچگان انتخاب شده است. در مجموع با تلفیق الگوریتم بهینه‌ساز دسته ذرات و جامعه مورچگان با مدل شبیه‌ساز  EPANET در محیط متلب پنج مدل الگوریتم دسته ذرات و سه مدل الگورتیم جامعه مورچگان ساخته شده است. برای صحت‌سنجی و ارزیابی اولیه مدل‌ها، از شبکه دوحلقه‌ای و برای بررسی تفضیلی آن­ها از شبکه توزیع آب اهر استفاده شده است. مقایسه نتایج برای 20 اجرای متوالی مدل‌ها در شبکه دوحلقه‌ای نشان می‌دهد که از بین مدل‌های دسته ذرات، مدل SPSO با 11 مورد رسید به جواب واقعی بدترین و مدل HMPSO2 با 20 بار رسیدن به جواب واقعی بهترین عملکرد را دارد. همچنین از بین مدل‌های جامعه مورچگان، مدل ACO1 با یک بار رسیدن به جواب واقعی بدترین و مدل ACO3 با 20 بار رسیدن به جواب واقعی بهترین عملکرد را دارد با این تفاوت که فضای جستجوی مدل ACO3 بسیار کوچک­تر از مدل ACO1 می‌باشد. مقایسه نتایج مدل HMPSO2 و ACO1 برای شبکه توزیع آب اهر نشان می‌دهد که هر دو مدل به­ خوبی توانسته‌اند ضرایب هیزن ویلیامز لوله‌های شبکه را تعیین کنند، با این تفاوت که HMPSO2 از نظر تعداد ارزیابی توابع هدف 5 برابر کم­تر و از نظر زمان رسیدن به جواب بهینه 6 برابر سریع‌تر نسبت به ACO1 توانسته است جواب بهینه را پیدا کند و از عملکرد بهتری برخوردار است.}, keywords_fa = {شبکه توزیع آب اهر,ضرایب هیزن‌ویلیامز,الگوریتم دسته ذرات,الگوریتم جامعه مورچگان}, url = {https://ceej.tabrizu.ac.ir/article_9119.html}, eprint = {https://ceej.tabrizu.ac.ir/article_9119_8e31d4af79961e417ec6058678dc8d38.pdf} } @article { author = {Sarkheil, Hamid and Azimi, Yousef and Rahbari, Shahrokh}, title = {Fuzzy Wastewater Quality Index (FWWQI) for Environmental Quality Assessment of Industrial Wastewater, a Case Study for South Pars Special Economic and Energy Zone}, journal = {Journal of Civil and Environmental Engineering}, volume = {51.2}, number = {103}, pages = {153-160}, year = {2021}, publisher = {Dean of Faculty of Civil Engineering}, issn = {2008-7918}, eissn = {2717-4077}, doi = {10.22034/jcee.2019.9101}, abstract = {     Environmental risk assessment is one of the most important parts of the environmental management system and plays a significant role in improving the quality indices and environmental performance. The cost of damage (direct, indirect, and intangible), and the consequences of pollution and environmental accidents are very high, causing significant damage to organizations and countries every year. Therefore, it is necessary that risk management, which involves identifying, assessing and controlling risk, is implemented at the level of companies that have the potential capacity for such events. In this research, the environmental quality assessment of the Pars Special Economic Region from 2011 to 2014 has been investigated using fuzzy logic. Fuzzy logic is a multi-valued logic that allows the grading of values to work with the user's values in a system.}, keywords = {Water Quality Index WQI,Wastewater,Fuzzy inference,Water Pollutants}, title_fa = {ارزیابی کیفیت محیط زیستی پساب در منطقه ویژه پارس جنوبی (پالایشگاه فاز A) با استفاده از سامانه استنتاج فازی}, abstract_fa = {ارزیابی ریسک محیط زیست، از بخش ­های بسیار مهم در سیستم مدیریت محیط زیستی بوده و نقش بسیار مهمی در بهبود شاخص­ های کیفیت و عملکرد محیط زیستی ایفاء می­ نمایند. در این تحقیق ارزیابی کیفیت محیط زیستی پساب منطقه ویژه اقتصادی انرژی پارس از سال 2011 تا 2014 با استفاده از منطق فازی بررسی شده است. در منطق چند ارزشی فازی با کمی ­سازی متغیرهای زبانی و استفاده از سایر داده ­های کمی محیط زیستی و ارائه شاخص ­های فازی می­توان به ارزیابی کیفیت و ریسک محیط زیستی یک واحد صنعتی دست یافت. شاخص فازی کیفیت پساب FWWQI1 در مطالعه موردی از سه آلاینده: COD2، BOD3، TSS4 و خصوصیت pH تشکیل شده است. در مدل ارائه شده در این مقاله حدود سطوح کیفیت فازی در توابع عضویت با بهره­ جویی از نتایج تحقیقات پیشین، استانداردهای محیط زیستی و قضاوت ­های کارشناسان محیط زیست اتخاذ گردیده­اند. بر اساس نتایج مدل ارائه شده، آلاینده­ های مؤثر در بالا بردن ریسک محیط زیستی، COD و BOD شناخته شده ­اند و شاخص های فازی کیفیت محیط زیستی پساب پالایشگاه A در سال 2013 معادل 8/48 (خوب) و در سال 2014 معادل 44 (خوب) به­دست آمده است. این امر نشان­ دهنده استانداردسازی کامل پالایشگاه A در زمینه کنترل آلودگی­ های پساب بوده که دارای روند رو به بهبود شاخص­های کیفیت و ریسک محیط زیستی بومی است و از جمله مهم­ترین دستاوردهای سامانه ­های مدیریت ISO14001 و HSE_MS5 در منطقه مورد نظر به شمار می ­رود.}, keywords_fa = {سیستم استنتاج فازی,شاخص فازی کیفیت محیط زیستی (FEQI)7,آلاینده‌های محیط زیستی}, url = {https://ceej.tabrizu.ac.ir/article_9101.html}, eprint = {https://ceej.tabrizu.ac.ir/article_9101_0990ccf57e5909cff90d4505db619be2.pdf} }