@article { author = {Abioghli, Hadi and Hamidi, Amir}, title = {Constitutive Modelling of the Mechanical Behavior of Fiber-Reinforced Cemented Sand}, journal = {Journal of Civil and Environmental Engineering}, volume = {49.1}, number = {94}, pages = {1-10}, year = {2019}, publisher = {Dean of Faculty of Civil Engineering}, issn = {2008-7918}, eissn = {2717-4077}, doi = {10.22034/ceej.2019.8941}, abstract = {Soil reinforcement with cement results in improvement of compressive and shear strengths, but adding the cement to soil causes more brittle behavior of soil. Fibers are used to solve this problem. The mechanical behavior of cemented granular soils is between soil and rock materials. Constitutive models for these materials should have the simulation capability of their special specifications. Up to now, different constitutive models for cemented soils have been presented. However, regarding the soil constitutive models with capability of considering the effects of cement and fiber, no study has been done. Constitutive models with capability of considering the effects of cement and fiber can be applied in geotechnical softwares to evaluate the correct behavior of such materials. However, representing a constitutive model for predicting the behavior of fiber-reinforced cemented soils is an effective step in geotechnical analysis.}, keywords = {Fiber-reinforced cemented sand,Constitutive model,Strain-stress behavior,deviatoric stress,Volumetric strain}, title_fa = {مدل‌سازی رفتار مکانیکی ماسه مسلح شده با ترکیب سیمان و الیاف}, abstract_fa = {در این پژوهش، یک مدل رفتاری اصلاح شده برای تبیین رفتار مکانیکی خاک­های مسلح شده با ترکیب سیمان و الیاف ارائه شده است. بدین منظور، یک مدل رفتاری که بر مبنای اصول پلاستیسیته عمومی قرار دارد برای خاک ماسه­ای انتخاب شده و براساس پارامترهای رفتاری ماسه سیمانته الیاف­دار اصلاح می­شود. در طی مراحل مدل­سازی، پارامترهای الاستیک، قانون جریان و قانون سخت­شوندگی مدل پایه برای خاک­های مسلح شده با سیمان و الیاف اصلاح می­شوند. به منظور سنجش منطقی بودن پارامترهای افزوده شده به مدل، میزان حساسیت مدل اصلاح شده به تغییرات پارامترهای اضافه شده مورد بررسی قرار گرفته است. برای ارزیابی این مدل، نتایج مدل­سازی به صورت منحنی­های کرنش محوری- تنش محوری اضافی و کرنش محوری- کرنش حجمی با نتایج سه نمونه از آزمایش­ها سه­محوری انجام شده روی خاک­های مختلف مقایسه شده و عملکرد مناسب آن در فشارهای همه­جانبه متفاوت و با درصدهای سیمان و الیاف مختلف تأیید شده است. در نهایت برای نمایش کارکرد مدل، خروجی­های مدل به صورت منحنی­های تنش مؤثر میانگین- مدول برشی، تنش مؤثر میانگین- مدول بالک و تنش مؤثر میانگین- نسبت کرنش حجمی به کرنش برشی برای خاک­های مختلف ارائه شده است. نتایج مدل­سازی نشان می­دهند که با افزایش فشار همه­جانبه، مقاومت اوج و تنش پسماند در نمونه­ها افزایش می­یابد. این امر در مورد خاک ماسه­ای مسلح شده با سیمان و الیاف و نیز خاک غیرمسلح به وضوح دیده می­شود و در مقایسه با داده­های آزمایشگاهی منطقی می­باشد.}, keywords_fa = {ماسه مسلح با سیمان و الیاف,مدل رفتاری,رفتار تنش- کرنش,تنش محوری اضافی,کرنش حجمی}, url = {https://ceej.tabrizu.ac.ir/article_8941.html}, eprint = {https://ceej.tabrizu.ac.ir/article_8941_ae3bf8dbeaffd5fe9884df1effb627c0.pdf} } @article { author = {Ahmadi, Hamid and Eyvazoghli, Hossein and Lotfollahi-Yaghin, Mohammad Ali}, title = {Investigating the Effects of Combined Tuned Liquid Damper (CTLD) on Dynamic Behavior of Offshore Jacket-Type Platforms}, journal = {Journal of Civil and Environmental Engineering}, volume = {49.1}, number = {94}, pages = {11-21}, year = {2019}, publisher = {Dean of Faculty of Civil Engineering}, issn = {2008-7918}, eissn = {2717-4077}, doi = {10.22034/ceej.2019.8942}, abstract = {In the present paper, the efficiency of combined tuned liquid damper (CTLD) in controlling the dynamic responses of offshore jacket platforms under the earthquake and sea wave excitation is investigated. This type of damping system consists of one or more tanks containing a fluid, generally water or oil, which can be installed on the topside (superstructure) of the platform. During the excitation, hydrodynamic action induced by the sloshing of the water in the tank acts as a resistant force against the vibration and controls the structural response. In fact, due to the oscillation of the structure, the fluid inside the tank begins to oscillate in the opposite direction. During this process, most part of the fluid has a wave-like oscillatory motion, while the part adjacent to the tank’s floor experiences a rigid-type displacement and exerts impact pressures to the tank’s walls. In order to attain maximum decrease in the structural response, the oscillation frequency of the fluid inside the tank should be near the natural frequency of the structural free vibration which can be determined by performing a modal analysis. Hence, one of the objectives of the present study is to adjust the frequency of fluid’s oscillation based on the natural frequency of the jacket structure. In other words, the aim is to find a frequency range in which the maximum decrease can be achieved in the amplitude of structural responses. In this research, using the FE software ANSYS, a jacket-type platform having dimensions appropriate for the Persian Gulf climate (case study: SPD1 platform) was modeled and then dynamically analyzed by the modal and time-history approaches subjected to the records of El Centro and Tabas earthquakes as well as 10 cases of wave loading with different height and period. The CTLD system was optimally designed and after the verification of FE results, the dynamic responses of the jacket-type platform with and without CTLDs were compared.}, keywords = {Offshore jacket-type platforms,Combined tuned liquid damper (CTLD),Dynamic analysis,Passive control}, title_fa = {بررسی تأثیر میراگر مایع تنظیم شده ترکیبی (CTLD) روی رفتار دینامیکی سکوهای فراساحلی جکتی تحت بارگذاری زلزله و موج}, abstract_fa = {تأثیر یک میراگر مایع تنظیم شده (TLD) تا حد زیادی به هندسه مخزن وابسته است. اغلب TLDهای معمول به مخزن‌های با مقاطع هندسی ساده، مانند مستطیلی و دایروی، محدودند. اما پلان کف سازه ممکن است محدودیت‌هایی برای استفاده از مخازن بزرگ با هندسه منظم ایجاد کند. هم‌چنین میراگرهای TLD تنها در یک فرکانس عمل می‌کنند. در این تحقیق، کارایی یک نوع میراگر مایع تنظیم شده ترکیبی (CTLD) در کاهش ارتعاش سکوهای فراساحلی شابلونی تحت تحریک زلزله و موج مورد بررسی قرار می­گیرد. با توجه به اصل هماهنگی بین فرکانس تلاطم سیال داخل مخازن و فرکانس اصلی نوسان سازه، CTLD باید به ‌گونه‌ای طراحی شود که برای هر دو شرایط بارگذاری موج و زلزله پاسخگو باشد. نتایج نشان دادند که اختصاص حالت "ارتباط: برقرار" برای بارگذاری موج و حالت "ارتباط: مسدود" برای بارگذاری زلزله بهترین نتیجه را دارد. ضمناً CTLD اثر قابل توجهی روی پاسخ‌های دینامیکی سکو دارد؛ به طوری که در صورت استفاده از CTLD، حداکثر کاهش در جابجایی عرشه فوقانی سکوی SPD1، به عنوان یک مطالعه موردی، تحت اثر زلزله حدود 13% و بیش‌ترین مقدار کاهش در جابجایی و شتاب عرشه فوقانی سکو تحت اثر بارگذاری امواج حدود 20% بود.}, keywords_fa = {سکوی فراساحلی جکتی,میراگر مایع تنظیم شده ترکیبی (CTLD),تحلیل دینامیکی,کنترل غیر فعال}, url = {https://ceej.tabrizu.ac.ir/article_8942.html}, eprint = {https://ceej.tabrizu.ac.ir/article_8942_8117752c9a246af4ed3d8704d6b9ce30.pdf} } @article { author = {Beiraghi, Hamid}, title = {Effect of Near and Far Fault Earthquake on the Shear Wall and Buckling Restrained Braces}, journal = {Journal of Civil and Environmental Engineering}, volume = {49.1}, number = {94}, pages = {23-33}, year = {2019}, publisher = {Dean of Faculty of Civil Engineering}, issn = {2008-7918}, eissn = {2717-4077}, doi = {10.22034/ceej.2019.8943}, abstract = {Near fault earthquakes compared to far-fault earthquakes have greater potential to create damage in structure. In this paper, the effect of far fault and near fault events on structural response of reinforced concrete shear wall with buckling restrained brace frame in tall and mid-rise buildings is studied. In the modeling, the specification of the reinforced shear wall and the buckling restrained braces is used. This kind of structural system is essentially a combined system. In this study, the structural system of the considered buildings is designed by using the valid codes and using response spectrum analysis method. Then, the nonlinear model is prepared. In the numerical model of the walls, the fiber type elements is used. The nonlinear time history analysis is implemented subjected to the far fault and near fault earthquakes. Finally, the responses of the structures are analyzed and compared. The results showed that, in the level of the base, the amount of shear demand of the wall share in the near field and far field is more than three times and twice the amount of shear demand share of braces. On average, the values of the strain demand ratio to the yielding strain in the core of the braces under the near field earthquakes was about 22, which is approximately 12 for the far field earthquakes.}, keywords = {Near and far fault earthquake,reinforced concrete wall,buckling restrained braces}, title_fa = {اثر تقویت دیوار برشی بتنی با کمک مهاربند کمانش‌ناپذیر تحت نگاشت حوزه دور و نزدیک}, abstract_fa = {زلزله‌های نزدیک گسل پالس‌دار در مقایسه با زلزله‌های دور از گسل، پتانسل بیشتری برای ایجاد خرابی در سازه‌ها را دارند. در این مقاله، اثر زلزله‌های دور از گسل و نزدیک گسل بر پاسخ سازه‌های با دیوار برشی بتن مسلح تقویت شده با مهاربند‌های کمانش­ناپذیر در ساختمان‌های با ارتفاع متوسط و بلند با لحاظ نمودن ویژگی‌های هرکدام از این المان‌ها مورد مطالعه قرار می‌گیرد. این سیستم سازه­ای یک سیستم ترکیبی به شمار می‌رود. در این پژوهش، سازه‌های مدل‌های مورد نظر، با به کارگیری روش تحلیل دینامیکی طیفی در سطح زلزله طرح و آیین­نامه‌های معتبر طراحی شدند. در ادامه، مدل غیر خطی سازه‌ها تهیه شدند. در مدل­سازی دیوار از المان‌های فایبری با قابلیت توسعه پلاستیسیته استفاده شد. تحلیل تاریخچه زمانی غیر خطی تحت اثر رکورد‌های دور و نزدیک گسل در سطح حداکثر زلزله محتمل انجام شد و پاسخ سازه‌ها بررسی و قیاس شد. نتایج نشان داد در تراز پایه، مقدار برش سهم دیوار در حوزه نزدیک و حوزه دور به ترتیب بیش از سه برابر و دو برابر مقدار برش سهم مهاربند‌ها است. مقادیر نسبت کرنش مهاربند به کرنش تسلیم مهاربند تحت زلزله نزدیک گسل به طور متوسط حدود 22 است که این نسبت برای حوزه دور به طور متوسط حدود 12 است.}, keywords_fa = {زلزله,حوزه دور و نزدیک,دیوار برشی بتن مسلح,مهاربند کمانش‌ناپذیر}, url = {https://ceej.tabrizu.ac.ir/article_8943.html}, eprint = {https://ceej.tabrizu.ac.ir/article_8943_0e8e77c745b6fe8c6cb1d92f3c7cc141.pdf} } @article { author = {Tavakoli, Sajad and Aminfar, Mohamad Hosein}, title = {Physical Modelling of Pull-out Resistance in Sandy Soil by Using Large Shear Box}, journal = {Journal of Civil and Environmental Engineering}, volume = {49.1}, number = {94}, pages = {35-45}, year = {2019}, publisher = {Dean of Faculty of Civil Engineering}, issn = {2008-7918}, eissn = {2717-4077}, doi = {10.22034/ceej.2019.8945}, abstract = {Soil nailing is regarded as one of the cast-in-place reinforcement methods for soil slopes to limit the deformation and increase its safety the use of which is considerably increasing due to some advantages such as short-term construction and low-cost implementation. This method is commonly used in compact and dense soils, as well as slopes where heavy machinery is difficult to access, although its use is limited in loose soils. The reason for using this method in dense soil is that the fine particles are less in this type of soil and have poor cementation, which itself causes little adhesion in the soil. In addition, a proper interaction results from the friction between the soil and the nail wall in this soil. The pull-out strength of the nails is one of the important parameters in designing nailed soil, which is difficult to estimate with high precision (Franzen, 1998). This parameter is often estimated by the design engineer when designing the nailed soil and then, verified by means of pull-out tests during construction. The researchers used field and laboratory methods to conduct pull-out tests and concluded that the pull-out strength of the soil-nail relies on various parameters such as soil shear strength, dilatation, injection pressure, nail installation method, releasing stress during drilling, as well as testing method, soil condition and the like. (Hong et al. 2017).}, keywords = {Nail,Direct Shear Box,Shear Strength,Pullout Capacity,Soil Nailing}, title_fa = {مدل‌سازی فیزیکی مقاومت بیرون کشیدگی میل‌مهار در خاک ماسه‌ای به کمک جعبه برش بزرگ مقیاس}, abstract_fa = {یک مطالعه آزمایشگاهی با استفاده از جعبه برش بزرگ مقیاس، برای بررسی رفتار میل­مهارهایی که در خاک ماسه­ای متراکم واقع شده­اند، انجام شده است. در این تحقیق، با انجام آزمایش­هایی نیروی بیرون کشیدگی حداکثر و نمودار بار- جابجایی به روش کنترل نرخ تغییر مکان، تعیین شده­اند. در این تحقیق همچنین به بررسی آزمایشگاهی تأثیر پارامترهای طول، قطر، مشخصه­های سطح میل­مهار (زبری) و میزان سربار بر ظرفیت بیرون کشیدگی میل­مهارها پرداخته شده است. در کلیه آزمایش­های انجام شده، در هنگام اعمال نیروی کششی میزان جابجایی میل­مهار و نیروی محوری قرائت شده و حداکثر نیروی محوری لازم برای بیرون کشیده شدن میل­مهار از خاک و همچنین مقدار جابجایی که این نیرو در آن حاصل می­شود، ثبت شده­اند. نتایج این تحقیق نشان می­دهد که رابطه بین نیرو و تغییرمکان در کلیه آزمایش­ها در تغییرشکل­های کوچک به صورت خطی بوده و با افزایش تغییرمکان این رابطه از حالت خطی خارج می­شود. همچنین با توجه به طول، قطر، نوع سطح میل­مهار و سربار وارده، میل­مهارها در تغییرمکان­های مختلفی به ظرفیت بیرون کشیدگی می­رسند که مقدار این تغییرمکان با افزایش ظرفیت بیرون کشیدگی، افزایش می­یابد. به عبارتی هرچه ظرفیت بیرون کشیدگی میل­مهارها افزایش می­یابد، شکل پذیری سیستم سازه­ای بالاتر می­رود. با افزایش طول و قطر میل­مهار، ظرفیت بیرون کشیدگی افزایش پیدا کرده ولی نرخ این افزایش به تناسب افزایش طول و قطر نبوده و از آن کمتر است. با زبر شدن سطح میل­مهار، اندرکنش بین خاک و میل­مهار افزایش یافته و باعث ایجاد نیروی محوری بیشتری در میل­مهار نسبت به حالت سطح صاف شده است.}, keywords_fa = {میل‌مهار,جعبه برش مستقیم,مقاومت برشی,ظرفیت بیرون کشیدگی,خاک میخ کوبی شده}, url = {https://ceej.tabrizu.ac.ir/article_8945.html}, eprint = {https://ceej.tabrizu.ac.ir/article_8945_ca72c7abea8277f107414072ae34fad4.pdf} } @article { author = {Hassanzadeh, Yousef and Aghakhani Afshar, Amirhosein}, title = {Using the MIROC-ESM Model to Investigate the Hydro-Climatic Conditions of the Small-Scale Watershed under the Impact of Climate Change}, journal = {Journal of Civil and Environmental Engineering}, volume = {49.1}, number = {94}, pages = {47-59}, year = {2019}, publisher = {Dean of Faculty of Civil Engineering}, issn = {2008-7918}, eissn = {2717-4077}, doi = {10.22034/ceej.2019.8956}, abstract = {Climatic paleontology evidences that climate change has always been present throughout the history of the planet, but the climatic changes of the last century have two distinct features, as compared with past climatic changes. First, human activities play a greater role in the nature of the current climate change. Second, the speed of recent climatic changes is greater, so that, a lot of changes will be occurring in the Earth's atmosphere during a short term (Telmer et al. 2004). Nowadays, global warming has significant effects on precipitation and runoff yield and water resources due to the increased concentration of greenhouse gases (Pervez and Henebry 2015). The average of climatic variables, especially the components of temperature, precipitation and runoff in the annual or seasonal scale, play a predominant role in the hydrological cycle and usually used as an indicator for assessing the climate change on the available water resources of Iran now and especially in the future (Afshar et al. 2017). A number of studies have been done to investigate the impact of climate change on the hydrological components of watersheds in Iran on the basis of the IPCC’s Fourth Assessment Report models (AR4). These models together with older emission scenarios have less resolution, in comparison with the Fifth Assessment Report (AR5) models. Thus, climate change studies with higher resolution climate models under the new emission scenarios (RCPs) of the AR5 seem necessary in the watersheds of Iran. Zoshk-Abardeh is one of the important sources of income for the regional villagers and has a high ecotourism potential in Khorasan Razavi Province, Iran. It is considered as an urban watershed and according to the historical evidence has a high flood potential, as well. Therefore, the identification of climate change effects on the hydrologic regime of this watershed is necessary for water resource planners.}, keywords = {Soil and Water Assessment Tool (SWAT),Climate Change,Fifth Assessment Report,Emission Scenario,Mann-Kendall Test}, title_fa = {استفاده از مدل MIROC-ESM در بررسی شرایط هیدرو- اقلیمی حوضه آبخیز کوچک مقیاس تحت اثر تغییر اقلیم}, abstract_fa = {چرخه هیدرولوژی در حوضه رودخانه­ها و منابع آب قابل دسترس در مناطق نیمه خشک جهان به شدت تحت تأثیر تغییرات اقلیم و افزایش بیش از حد انتشار گازهای گلخانه­ای قرار دارند. هدف این تحقیق بررسی اثرات تغییرات اقلیم بر شرایط اقلیمی حوضه آبخیز زشک- ابرده در استان خراسان رضوی می­باشد. مدل SWAT توسط الگوریتم SUFI-2 با هدف بهبود نتایج شبیه­سازی دبی حوضه مورد واسنجی و اعتبارسنجی قرار گرفت. مدل MIROC-ESM از سری مدل­های گزارش پنجم هیأت بین­الدول تغییر اقلیم (Coupled Model Intercomparison Project; CMIP5) جهت بررسی اثرات تغییر اقلیم بر مؤلفه­های هیدرو- اقلیمی حوضه و تحت چهار سناریوی انتشار (Representative Concentration Pathways; RCPs) به نام­های6/2، 5/4، 0/6 و 5/8 و در سه بازه زمانی آینده نزدیک (2042-2014)، میانی (2071-2043) و دور (2100-2072) مورد استفاده قرار گرفت. همچنین، روند تغییرات حوضه با استفاده از آزمون من- کندال مورد بررسی قرار گرفت. نتایج نشان داد که تغییرات درجه تحت سناریوهای RCP4.5 و RCP6.0 در دوره زمانی آینده نزدیک و میانی و آینده دور (RCP6.0) از یک روند معنی­دار افزایشی تبعیت می­کند. از طرف دیگر، مؤلفه بارش در تمامی سناریوها از تغییرات کاهشی غیرمعنی­داری پیروی می­کند. همچنین، تغییرات رواناب تحت سناریوی RCP4.5 و در دوره­های زمانی آینده میانی و دور و تحت سناریوی RCP8.5 و در آینده دور از روند معنی­دار کاهشی تبعیت می­‏کند. به طور کلی، میزان درجه حرارت در یک مسیر افزایشی پیش می­رود، در حالی که مقادیر بارش و رواناب یک جابجایی کاهشی را تا انتهای قرن 21 در حوضه دنبال می­کنند.}, keywords_fa = {مدل ارزیابی آب و خاک,تغییر اقلیم,گزارش پنجم هیأت بین‌الدول,سناریوی انتشار,آزمون من- کندال}, url = {https://ceej.tabrizu.ac.ir/article_8956.html}, eprint = {https://ceej.tabrizu.ac.ir/article_8956_6caa6b74bf2c807cc28082c5d6f8c926.pdf} } @article { author = {Rezaee-Pajand, Mohammad and Sarafrazi, Seyyed Reza}, title = {A Method for Quantifying the Efficiency Degree of Plate Bending Element}, journal = {Journal of Civil and Environmental Engineering}, volume = {49.1}, number = {94}, pages = {61-75}, year = {2019}, publisher = {Dean of Faculty of Civil Engineering}, issn = {2008-7918}, eissn = {2717-4077}, doi = {10.22034/ceej.2019.8957}, abstract = {It is essential to evaluate the element accuracy in the finite element method. In the common qualitative tactic, the convergence curves are usually utilized. An algorithm is proposed in this paper that grades the element using the rate, monotony, and ultimate error in addition to inaccuracy. Based on the element scores in the different tests, the authors' technique can evaluate the degree of element efficiency.}, keywords = {Plate bending element,Efficiency degree,Element evaluation,Benchmark problems}, title_fa = {روشی برای ارزیابی کمی درجه شایستگی جزء صفحه‌ خمشی}, abstract_fa = {     ارزیابی جزءها برای اطمینان از دستیابی به پاسخ‌های درست در روش اجزای محدود ضروری می‌باشد. به طور معمول، این کار بر روی نمودار همگرایی و به صورت کیفی انجام می‌پذیرد. در این مقاله، راهکارهایی پیشنهاد خواهد شد که بتوانند سرعت، یکنوایی و حد نهایی همگرایی پاسخ‌ها را افزون بر مقدار خطا، وارد فرآیند ارزیابی کنند. ‌بر پایه نمره‌های جزء در آزمون‌های گوناگون، روش نویسندگان درجه‌ شایستگی جزء را به دست می‌دهد. افزون بر این‌ها، آزمون‌های سنگ نشانه‌ صفحه‌ خمشی دسته‌بندی خواهند شد. همچنین، جزء نوینی رابطه‌سازی می‌شود و شیوه‌ ارزیابی پیشنهادی بر روی آن اجرا می‌گردد. نتیجه‌ نهایی کار، پیشنهاد روش کمّی درجه‌ ‌شایستگی به جای شیوه‌ سنتی کیفی سنجش توانایی‌های جزء‌های صفحه خمشی خواهد بود.}, keywords_fa = {جزء محدود صفحه‌ خمشی,درجه‌ شایستگی,ارزیابی جزء,مسأله‌ سنگ نشانه}, url = {https://ceej.tabrizu.ac.ir/article_8957.html}, eprint = {https://ceej.tabrizu.ac.ir/article_8957_8ea817c183b2ff4fec37fdefb29388a6.pdf} } @article { author = {Zayeri, Mohammad Reza and Ghomeshi, Mehdi}, title = {Numerical Modeling of Turbid Density Current in Dez Reservoir}, journal = {Journal of Civil and Environmental Engineering}, volume = {49.1}, number = {94}, pages = {77-88}, year = {2019}, publisher = {Dean of Faculty of Civil Engineering}, issn = {2008-7918}, eissn = {2717-4077}, doi = {10.22034/ceej.2019.8958}, abstract = {In Iran, Dez dam has suffered from long flood-induced high turbidity currents. A major problem of this dam is sedimentation that has now blocked the irrigation gates. Mean annual sediment deposition in the reservoir is about 15 million tons. The level of deposited sediment is very close to the intake of power stations. The elevation of sediment deposition has now reached to nearly 14 meters under the intakes of power stations (Research center of power Ministry, 2003). In this study, a high resolution 3-D numerical model is employed based on nonhydrostatic Navier-Stokes equations, to investigate the dynamics of density flows resulting from the complicated reservoir morphometry.}, keywords = {Turbidity current,Sedimentation,Sluice gates,Numerical modeling}, title_fa = {مدل‌سازی عددی جریان گل‌آلود در مخزن سد دز}, abstract_fa = {دینامیک سیالات محاسباتی (CFD) در تحلیل پدیده‌های سیالاتی به علت دقت بالای آن به طور گسترده‌ای مورد استفاده قرار می‌گیرد. با این حال، استفاده از مدل عددی در تحقیق و پژوهش جریان‌های گل‌آلود ورودی به مخزن یک رویکرد نسبتاً جدید است، زیرا هیدرودینامیک جریان گل‌آلود به یک مخزن بسیار پیچیده می‌باشد. اطلاع از نحوه حرکت، پخش و گسترش طولی، عرضی و عمقی و زمان رسیدن آن‌ها به بدنه سد در مدیریت بهینه زمان باز و بسته شدن دریچه‌ها حائز اهمیت است. سد دز یکی از سدهای مهم کشور بوده که در شمال خوزستان قرار گرفته است. در این مقاله از دو مدل یک بعدی و سه بعدی جهت شبیه­سازی پیشروی جریان‌ گل‌آلود ورودی به مخزن سد دز استفاده گردید. کمیت­های هیدرودینامیکی جریان گل‌آلود شامل ارتفاع و سرعت متوسط جریان به دست آمده از مدل عددی محاسبه و با نتایج داده‏های اندازه‌گیری شده مقایسه گردید که برای سرعت متوسط حداقل خطا 3/6 درصد و حداکثر خطا 5/10مشاهده گردید. خطاهای مشاهده شده برای ارتفاع متوسط جریان حداقل 6/4 و حداکثر 7/8 درصد می‌باشد. از تحلیل مقادیر اندازه‏گیری شده و تخمین زده شده می‏توان بیان داشت که دبی‏های بین۲۳۰ تا ۶۰۰ مترمکعب در ثانیه با غلظت رسوب 5/0 تا 15/1 گرم در لیتر جریان گل‌آلود ضعیغی ایجاد نموده­اند به طوری که این جریان­ها نتوانسته­اند خود را به دیواره سد برسانند. دبی‏های بیش از ۶۰۰ متر مکعب در ثانیه با غلظت رسوب بیش از 2/1 گرم در لیتر جریان گل‌آلود نسبتاً قوی ایجاد نموده­اند که توانسته­اند خود را به دیواره سد برسانند.}, keywords_fa = {جریان گل‌آلود,سد دز,مدل عددی,دینامیک سیالات محاسباتی}, url = {https://ceej.tabrizu.ac.ir/article_8958.html}, eprint = {https://ceej.tabrizu.ac.ir/article_8958_b1effdd10f556885c2409bbd18852a8d.pdf} } @article { author = {Shooshpasha, Issa and Abbasi, Mojtaba and Molaabasi, Hossein}, title = {The Effect of Zeolite on Shear Strength of Babolsar Sand Stabilized with Cement}, journal = {Journal of Civil and Environmental Engineering}, volume = {49.1}, number = {94}, pages = {89-96}, year = {2019}, publisher = {Dean of Faculty of Civil Engineering}, issn = {2008-7918}, eissn = {2717-4077}, doi = {10.22034/ceej.2019.8959}, abstract = {Chemical stabilization by cement is among the factors of optimizing the soil performance. Numerous studies have been performed in the field of using cement as a stabilizing material (Naderi Nia- Naeini SA, 2009; Dupas J, Pecker A, 1979). The results of this research show that the addition of cement to the soil increases stiffness and improves soil’s failure behavior and its engineering properties. Improving the engineering properties of the soils stabilized with cement is essentially due to hardening of cement as a result of hydration of cement and forming additional cementitious materials between the hydrated cement and clay particles in the soil (Shihata SA, Baghdadi ZA, 2001). On the other hand, although cement industry has adopted the most modern technologies to reduce pollution, different stages of cement production and transportation have a great share in the environmental pollution. Studies indicate that to produce one ton of cement and clinker in Iran 0.655 and 0.79 tons of CO2 greenhouse gas are emitted respectively (Milika Bildrici 2019). Therefore the cement mix optimization is such that the lowest amount of energy is used to produce it with the least damage to natural resources and finally the best performance possible is provided which is considered as a main goal (Khaleghi, M. H. 1990).}, keywords = {Stabilization,Cement,Zeolite,Compaction,Shear Strength}, title_fa = {بررسی اثر زئولیت بر مقاومت برشی خاک ماسه‌ای بابلسر، تثبیت‌ شده با سیمان}, abstract_fa = {ماسه­های سیمانی به ‌عنوان یکی از موضوعات اقتصادی و زیست‌محیطی در تثبیت خاک شناخته شده‌اند. در برخی موارد ترکیبی از سیمان و ماسه با سایر مواد از جمله فیبر، شیشه، نانو­ذرات و یا زئولیت می‌تواند به‌ طور مؤثر در تثبیت خاک در جاده‌سازی استفاده شود. در این بررسی زئولیت به ‌عنوان یکی از مواد افزودنی به سیمان و اثرات آن بر مقاومت برشی مورد ارزیابی قرار گرفته است. در این راستا از زئولیت نوع معدنی کلینوپیلولیت، سیمان تیپ II نکا و ماسه بابلسر به عنوان خاک پایه استفاده شد. تعداد 160 آزمایش مقاومت برشی بر روی طرح اختلاط 24 حالت سیمان و زئولیت شامل درصد سیمان‌های مختلف 2، 4، 6 و 8 درصد وزن خشک کل نمونه و درصد­های جایگزینی 0، 10، 30، 50، 70 و 90 زئولیت با سیمان با تنش سربار­های 10، 20 و 40 کیلو­نیوتن بر مترمربع مطابق با حداکثر وزن مخصوص و رطوبت بهینه طرح اختلاط در مدت عمل‌آوری 7 و 28 روز انجام شد. نتایج نشان داد که با جایگزینی تا 50% زئولیت به ‌جای سیمان مقاومت برشی نمونه­ها، نسبت به نمونه‌های بدون زئولیت به میزان متوسط 62 درصد همراه با افزایش کرنش گسیختگی، افزایش می­یابد.}, keywords_fa = {تثبیت,سیمان,زئولیت,تراکم,مقاومت برش}, url = {https://ceej.tabrizu.ac.ir/article_8959.html}, eprint = {https://ceej.tabrizu.ac.ir/article_8959_e4155cebe60b913f5ea0138362b24bce.pdf} } @article { author = {Goodarzi, Amir reza and Akbari, Hamidreza}, title = {Impact of Lime-Slags Combination on the Hydro-Mechanical Behavior of Clayey Soils}, journal = {Journal of Civil and Environmental Engineering}, volume = {49.1}, number = {94}, pages = {97-108}, year = {2019}, publisher = {Dean of Faculty of Civil Engineering}, issn = {2008-7918}, eissn = {2717-4077}, doi = {10.22034/ceej.2019.8960}, abstract = {In this study, the effects of two types of by-product materials resulting from the manufacture of iron including GGBS and BOFS on the hydro-mechanical performance of a lime-stabilized clayey soil were investigated. The results indicate that the addition of slag particularly of GGBS has a less impact on the soil engineering properties as compared to lime treatment. It was found that the lime-slag (LAS) combination decreases the water retention potential, controls the soil settlement and causes a considerable increase in the mechanical capacity. The composite clay sample containing LAS exhibits a better performance than that of lime-treated soil particularly at short time of curing.}, keywords = {Clayey soil,lime,slag,hydro-mechanical properties,micro-structure}, title_fa = {تأثیر ترکیب پسماندهای صنعتی و آهک بر رفتار هیدرومکانیکی رس‌ها}, abstract_fa = {در پژوهش حاضر تأثیر استفاده توأم از ترکیب پسماندهای صنعت فولادسازی (شامل سرباره GGBS و BOFS) و آهک در شدت­بخشی فرآیند بهبود خصوصیات مهندسی مصالح رسی بررسی شد. بدین منظور مقادیر صفر تا 30 درصد وزنی آهک، سرباره و مخلوط آهک- سرباره، هریک به طور جداگانه به یک نمونه خاک نرم (عمدتاً کائولینیت) اضافه و پس از عمل­آوری، مجموعه­ای از آزمایش­های مختلف بزرگ­ساختاری و ریزساختاری صورت گرفت. نتایج به دست آمده مؤید آن است که در مقایسه با آهک، حضور سرباره به ویژه GGBS تأثیر اندکی بر مشخصات ژئومکانیکی خاک دارد. از طرفی، مشخص شد ترکیب آهک و سرباره (LAS) موجب کاهش شدید پتانسیل نگهداشت آب و کنترل نشست خاک شده و ظرفیت باربری را به طور قابل ملاحظه­ای افزایش می­دهد. به نحوی که مقاومت فشاری این سری از نمونه­ها بیش از 15 برابر رشد داشته و رفتار آنها به ویژه در زمان­های محدود نگهداری (کمتر از 7 روز) حتی نسبت به تثبیت با آهک تنها، تا 150% بهبود می­یابد. با استناد به طیف­های اشعه ایکس و آنالیزهای SEM-EDX، علت عملکرد مطلوب LAS به دلیل مصرف بهینه آهک برای رشد نانو ساختارهای سیمانی در سیستم خاک- افزودنی ارزیابی شد. در مجموع نتایج این مطالعه نشان می­دهد استفاده از ترکیب آهک و سرباره (به خصوص BOFS) گزینه مناسبی برای بهسازی رفتار رس­ها بوده که علاوه بر کاهش 75 درصدی مصرف آهک، زمان عمل­آوری را بیش از سه برابر کم کرده و کمک مؤثری به پسمانداری زائدات صنعتی در راستای حفظ محیط­زیست می­نماید.}, keywords_fa = {رس نرم,آهک,پسماند فولادسازی,خصوصیات هیدرومکانیکی,ریزساختار}, url = {https://ceej.tabrizu.ac.ir/article_8960.html}, eprint = {https://ceej.tabrizu.ac.ir/article_8960_fea512a8b9770275b8891a7dbb60c984.pdf} } @article { author = {Mohtasham Moein, Mohammad and Mousavi, S. Yasin and Madandoust, Rahmat and Naser Saeid, Hamidreza Naser Saeid}, title = {The Impact Resistance of Steel Fiber Reinforcement Concrete under Different Curing Conditions: Experimental and Statistical Analysis}, journal = {Journal of Civil and Environmental Engineering}, volume = {49.1}, number = {94}, pages = {109-121}, year = {2019}, publisher = {Dean of Faculty of Civil Engineering}, issn = {2008-7918}, eissn = {2717-4077}, doi = {10.22034/ceej.2019.8961}, abstract = {The utilization of steel fiber reinforcement concrete (SFRC) in practical applications is gained considerable attention owing to its acceptable strength (Nili & Afroughsabet, 2010; El-Dieb, 2009) and durability. Taking to account, SFRC in constructions may inevitably subjected to short duration dynamic loading, the impact resistance of SFRC which cured under different curing conditions must be well documented. To evaluate the resistance of SFRC under impact loadings, a variety of test procedures have been suggested (ACI Committee 544, 1996) . In this study, the drop-weight test as recommended by ACI committee 544 (ACI Committee 544, 1996) were utilized.}, keywords = {Fiber-reinforcement concrete,Steel fiber,Impact resistance,Curing condition}, title_fa = {مقاومت ضربه‌ای بتن حاوی الیاف فولادی تحت شرایط مختلف عمل‌آوری: مطالعه آزمایشگاهی و تحلیل آماری}, abstract_fa = {در این مطالعه به بررسی آزمایشگاهی و تحلیل آماری مقاومت ضربه‌ای بتن حاوی الیاف فولادی در شرایط مختلف عمل‌آوری پرداخته شده است. برای این منظور از دو نوع الیاف فولادی شامل الیاف قلاب­دار و همچنین الیاف موج­دار (در دو نسبت طول به قطر) در ساخت بتن الیافی استفاده گردید. علاوه بر سنجش مقاومت­های فشاری و کششی نمونه‌ها در سن 28 روزه، مقاومت اولین ترک، مقاومت شکست و همچنین تعداد ضربات بعد از اولین ترک بر اساس آزمون سقوط وزنه در هر طرح مخلوط، بر روی 64 دیسک بتنی با ابعاد قطر 15 سانتی­متر و ارتفاع 4/6 سانتی­متر ارزیابی شد. نتایج نشان داد که حضور الیاف فولادی باعث افزایش مقاومت­های فشاری، کششی و ضربه‌ای بتن صرف ‌نظر از نوع عمل‌آوری آن خواهد شد. با درنظر گرفتن تأثیر محیط عمل‌آوری، نگهداری نمونه‌ها در محیط خشک در مقایسه با محیط مرطوب نه تنها باعث کاهش میزان میانگین مقاومت اولین ترک و شکست بتن می‌گردد بلکه تغییرپذیری مقاومت اولین ترک و مقاومت شکست را تعریض نموده و به عبارتی پراکندگی بیشتری را منجر می‌شود. همچنین نتایج این مطالعه نشان داد که حضور الیاف باعث بهبود معنادار تعداد ضربات بعد از اولین ترک در هر دو محیط عمل‌آوری می‌گردد. به عنوان یک نتیجه‌گیری کلی می‌توان عملکرد مؤثرتر الیاف فولادی قلاب­دار را در تقابل با الیاف فولادی موج­دار حتی با نسبت طول به قطر کوچک‌تر در افزایش مقاومت ضربه‌ای بتن استنباط نمود.}, keywords_fa = {بتن الیافی,الیاف فولادی,مقاومت ضربه‌ای,شرایط عمل‌آوری}, url = {https://ceej.tabrizu.ac.ir/article_8961.html}, eprint = {https://ceej.tabrizu.ac.ir/article_8961_16d38dbeda7a06c0031faa5105632ac0.pdf} } @article { author = {Mousavi Khalkhali, Seyyed Alii and Poursha, Mehdi and Afshin, Hasan and Chenaghlou, Mohammad Reza}, title = {A Comparison of Rapid Seismic Vulnerability Assessment Methods for Existing Residential Buildings in Tabriz using the Analytical Hierarchy Process (AHP): Case Study}, journal = {Journal of Civil and Environmental Engineering}, volume = {49.1}, number = {94}, pages = {123-137}, year = {2019}, publisher = {Dean of Faculty of Civil Engineering}, issn = {2008-7918}, eissn = {2717-4077}, doi = {10.22034/ceej.2019.8962}, abstract = {     Residential buildings in Tabriz, which were constructed according to the requirements of old seismic codes or considering no seismic code, should be assessed under the effect of seismic loads. To this end, the first step is the seismic vulnerability assessment of buildings within a short time before an earthquake occurs. To achieve reasonable results, it is necessary to study the accuracy and compatibility of existing seismic vulnerability assessment methods according to the conditions and characteristics of buildings in the region. Therefore, it is possible to select the most appropriate method for the rapid seismic vulnerability assessment (RSVA) by comparing the methods. In order to increase the accuracy of the comparison, the multi-criteria decision analysis method is used. To determine the accuracy of RSVA methods, three typical residential buildings were evaluated using rapid and quantitative (analytical) assessment methods. The structures examined in this investigation include two steel concentrically braced frame (CBF) buildings and one unreinforced masonry building.}, keywords = {Rapid seismic assessment methods,Quantitative assessment method,Residential buildings in Tabriz,Concentrically braced frame (CBF),Unreinforced masonry buildings,Analytical Hierarchy Process (AHP)}, title_fa = {مقایسه روش‌های ارزیابی سریع آسیب‌پذیری لرزه‌ای برای ساختمان‌های مسکونی در تبریز با بکارگیری فرآیند تحلیل سلسله مراتبی}, abstract_fa = {با توجه به عدم مقاوم بودن آن­دسته از ساختمان­های مسکونی در شهر لرزه­خیز تبریز که بر اساس آیین­نامه­های قدیمی یا بدون ملاحظات آیین­نامه­ای ساخته شده­اند، لازم است که در مدت‌ زمان اندک نسبت به ارزیابی آسیب‌پذیری لرزه­ای این ساختمان­ها اقدام شود. از این­رو باید روشی برای برآورد سریع آسیب‌پذیری ساختمان­ها با توجه به شرایط منطقه لرزه­خیز تهیه شود. برای رسیدن به نتایج مناسب لازم است که دقت ارزیابی و سازگاری روش­های مختلف موجود با شرایط و ویژگی­های ساختمان­های منطقه مورد نظر مورد بررسی قرار گیرد و پس از مقایسه آن‌ها، مناسب­ترین روش برای ارزیابی سریع ساختمان­های منطقه انتخاب شود. برای انجام این امر می­توان از فرآیند تحلیل سلسله­مراتبی (AHP) که یکی از روش­های آنالیز تصمیم­گیری چندمعیاره است، استفاده نمود. برای تعیین دقت روش‌های ارزیابی سریع که یکی از معیارهای تعیین ‌شده برای مقایسه این روش­ها است، دو ساختمان فولادی با سیستم مهاربندی همگرا و یک ساختمان بنایی غیرمسلح که در فاصله زمانی سال­های 65 تا 74 در شهر تبریز ساخته شده­اند، با روش‌های ارزیابی سریع و کمّی، مورد ارزیابی قرار گرفته و نتایج حاصل از آن‌ها مورد مقایسه قرار می­گیرد. ارزیابی کمّی این ساختمان‌ها نیز بر اساس دستورالعمل بهسازی لرزه‌ای ساختمان­های موجود و با استفاده از روش تحلیل استاتیکی غیر خطی انجام می­شود. روش‌های ارزیابی سریع مورد مقایسه در این پژوهش، شامل روش‌های ارائه ‌شده در دستورالعمل‌های FEMA154، NRC، ایران (نشریه‌های 364 و 376) و همچنین روش آریای تکمیل ‌شده می‌باشد. این روش‌ها با استفاده از روش AHP برمبنای 7 معیارِ تعیین ‌شده، با یکدیگر مورد مقایسه می­گیرند و از بین آن‌ها روشی مناسب برای ارزیابی لرزه­ای سریع ساختمان­های مسکونی در تبریز معرفی می­شود. مقایسه نتایج ارزیابی سریع و کمّی نشان می­دهد که ارزیابی سریع مطابق FEMA154 دارای دقت و اطمینان بیشتری نسبت به سایر روش‌های یاد شده در ارزیابی ساختمان‌های مورد مطالعه می‌باشد. همچنین این روش در بین روش‌های یاد شده مناسب‌ترین گزینه برای ارزیابی سریع ساختمان‌های مسکونی در تبریز می­باشد.با توجه به عدم مقاوم بودن آن­دسته از ساختمان­های مسکونی در شهر لرزه­خیز تبریز که بر اساس آیین­نامه­های قدیمی یا بدون ملاحظات آیین­نامه­ای ساخته شده­اند، لازم است که در مدت‌ زمان اندک نسبت به ارزیابی آسیب‌پذیری لرزه­ای این ساختمان­ها اقدام شود. از این­رو باید روشی برای برآورد سریع آسیب‌پذیری ساختمان­ها با توجه به شرایط منطقه لرزه­خیز تهیه شود. برای رسیدن به نتایج مناسب لازم است که دقت ارزیابی و سازگاری روش­های مختلف موجود با شرایط و ویژگی­های ساختمان­های منطقه مورد نظر مورد بررسی قرار گیرد و پس از مقایسه آن‌ها، مناسب­ترین روش برای ارزیابی سریع ساختمان­های منطقه انتخاب شود. برای انجام این امر می­توان از فرآیند تحلیل سلسله­مراتبی (AHP) که یکی از روش­های آنالیز تصمیم­گیری چندمعیاره است، استفاده نمود. برای تعیین دقت روش‌های ارزیابی سریع که یکی از معیارهای تعیین ‌شده برای مقایسه این روش­ها است، دو ساختمان فولادی با سیستم مهاربندی همگرا و یک ساختمان بنایی غیرمسلح که در فاصله زمانی سال­های 65 تا 74 در شهر تبریز ساخته شده­اند، با روش‌های ارزیابی سریع و کمّی، مورد ارزیابی قرار گرفته و نتایج حاصل از آن‌ها مورد مقایسه قرار می­گیرد. ارزیابی کمّی این ساختمان‌ها نیز بر اساس دستورالعمل بهسازی لرزه‌ای ساختمان­های موجود و با استفاده از روش تحلیل استاتیکی غیر خطی انجام می­شود. روش‌های ارزیابی سریع مورد مقایسه در این پژوهش، شامل روش‌های ارائه ‌شده در دستورالعمل‌های FEMA154، NRC، ایران (نشریه‌های 364 و 376) و همچنین روش آریای تکمیل ‌شده می‌باشد. این روش‌ها با استفاده از روش AHP برمبنای 7 معیارِ تعیین ‌شده، با یکدیگر مورد مقایسه می­گیرند و از بین آن‌ها روشی مناسب برای ارزیابی لرزه­ای سریع ساختمان­های مسکونی در تبریز معرفی می­شود. مقایسه نتایج ارزیابی سریع و کمّی نشان می­دهد که ارزیابی سریع مطابق FEMA154 دارای دقت و اطمینان بیشتری نسبت به سایر روش‌های یاد شده در ارزیابی ساختمان‌های مورد مطالعه می‌باشد. همچنین این روش در بین روش‌های یاد شده مناسب‌ترین گزینه برای ارزیابی سریع ساختمان‌های مسکونی در تبریز می­باشد.}, keywords_fa = {روش‌های ارزیابی لرزه‌ای سریع,ارزیابی کمی (تحلیلی),ساختمان‌های مسکونی تبریز,سیستم مهاربندی همگرا,ساختمان بنایی غیرمسلح,روش AHP}, url = {https://ceej.tabrizu.ac.ir/article_8962.html}, eprint = {https://ceej.tabrizu.ac.ir/article_8962_320ec8c6284905b135047b580e41daed.pdf} }