ORIGINAL_ARTICLE
تخمین عمق آبشستگی پایههای پل با استفاده از روشهای آماری و الگوریتمهای هوشمند
تخمین دقیق عمق آبشستگی اطراف پایههای پل در کارهای مهندسی حائز اهمیت میباشد. به دلیل پیچیدگی این پدیده بسیاری از روابط موجود قادر نمیباشند عمق آبشستگی را با دقت قابل قبولی پیشبینی نمایند. در این تحقیق ابتدا 17 رابطه تخمین عمق آبشستگی با دادههای میدانی مقایسه شدند و رابطـه فروهلیچ 1991 به عنوان بهترین رابطه انتخاب گردید. سپس با استفاده از روشهای ترکیبی میانگین (C-SAM)، رگرسیــون خطــی (C-REG) و ماشین بردار پشتیبان (C-SVM) 5 رابطه تخمین عمق آبشستگی (شن، فروهلیچ، فروهلیچ اصلاح شده، بلنچ I و اینگلیس II) که دارای کمترین خطا بودند با یکدیگر ترکیب شدند. مقایسه در مرحله صحتسنجی نشان داد نتایج C-SAM به دلیل اینکه از میانگین روابط استفاده مینماید، تفاوتی با رابطه فروهلیچ ندارد؛ اما C-REG و به ویژه C-SVM توانستهاند نتایج را بهبود بخشند. C-SVM توانسته ضریب همبستگی و خطای RMSE رابطه فروهلیچ را به ترتیب از 59/0 به 85/0 و از 63/0 به 42/0 تغییر دهد. با استفاده از SVM عمق آبشستگی با استفاده از پارامترهای مؤثر بر آبشستگی (P-SVM) بررسی گردید. نتایج نشان دادند دقت P-SVM قابل قبول است. دقت P-SVM با ضریب همبستگی 77/0 و خطای RMSE 51/0 بین دو روش C-REG و C-SVM قرار دارد. در این تحقیق نشان داده شد ترکیب روابط تجربی با استفاده از تکنیک SVM دارای بیشترین دقت و ترکیب پارامترهای مؤثر بر آبشستگی در رتبه دوم قرار دارد. همچنین نتایج این تحقیق نشان دادند SVM با استفاده از هوش مصنوعی میتواند پدیده آبشستگی را با دقت بیشتری نسبت به روابط تجربی شبیهسازی نماید.
https://ceej.tabrizu.ac.ir/article_5185_3caf9c9616033ec73bd7065ec98fd82b.pdf
2016-08-22
1
13
پایه پل
روش ترکیبی
عمق آبشستگی
SVM
سیدمرتضی
سیدیان
s.m.seyedian@gmail.com
1
استادیار دانشکده کشاورزی، دانشگاه گنبد کاووس
LEAD_AUTHOR
ابوالحسن
فتح آبادی
ahfathabadi@yahoo.com
2
استادیار دانشکده کشاورزی، دانشگاه گنبد کاووس
AUTHOR
[1] Parola, A. C., Hagerty, D. J., Kamojjala, S., "Highway Infrastructure Damage Caused by the 1993 Upper Mississippi River Basin Flooding", Rep. No. 417, Transportation Research Board, Washington, 1998.
1
[2] Richardson, E. V., Davis, S. R., "Evaluating Scour at Bridges", Hydraulic Engineering Circular 18 (HEC-18), U.S. Federal Highway Administration, Washington, 2001.
2
[3] Morris, J. L., Pagan-Ortiz, J. E., "Bridge Scour Evaluation Program in the United States", Stream Stability and Scour at Highway Bridges, E.V. Richardson and P.F. Lagasse, eds., ASCE, Reston, 1999, pp 61-70.
3
[4] Wardhana, K., Hadipriono, F. C., "Analysis of Recent Bridge Failures in the United States", Journal of Performance of Constructed Facilities, 2003, 17 (3), 144-150.
4
[5] Bateni, S. M., Borgheib, S. M., Jeng, D. S., "Neural Network and Neuro-Fuzzy Assessments for Scour Depth Around Bridge Piers", Engineering Applications of Artificial Intelligence, 2007, 20 (3), 401-414.
5
[6] Bateni, S. M., Jeng, D. S., Melville, B. W., "Bayesian Neural Networks for Prediction of Equilibrium and Time-Dependent Scour Depth Around Bridge Piers", Advances in Engineering Software, 2007, 38 (2), 102-111.
6
]7[ ظهیری، ج.، ظهیری، م.، سالاری جزی، م.، "برآورد بیشترین ژرفای آبشستگی در پیرامون پایههای پل با بهرهوری از شبکههای وایازی کلی و پرسپترون چند لایهای"، فصلنامه مهندسی منابع آب، 1391، 14 (3)، 51-60.
7
]8[ روشنگر، ک.، روحپرور، ب.، "عملکرد سیستمهای فرامدل در تخمین عمق آبشستگی پایههای پل در خاکهای غیر چسبنده"، نشریه مهندسی عمران و محیط زیست، 1391، 42 (3)، 13-26.
8
]9[ روشنگر، ک.، روحپرور، ب.، "ارزیابی عملکرد سیستمهای هوش مصنوعی برای شبیهسازی آبشستگی پایههای پل درخاکهای چسبنده"، نشریه دانش آب و خاک، 1392، 23 (3)، 169-182.
9
[10] Vapnik, V., "The Nature of Statistical Learning Theory", Springer-Verlag, New York, 1995, pp 113-141.
10
[11] Noori, R., Abdoli, M. A., Ameri, A., Jalili-Ghazizade, M., "Prediction of Municipal Solid Waste Generation with Combination of Support Vector Machine and Principal Component Analysis: A Case Study of Mashhad", Environmental Progress & Sustainable Energy, 2009, 28 (2), 249-258.
11
[12] Liong, S. Y., Sivapragasam, C., "Flood Stage Forecasting With SVM", Journal of the American Water Resources Association, 2002, 38 (1), 173-186.
12
[13] Babovic, V., Keijzer, M., Bundzel, M., "From Global To Local Modelling: A Case Study in Error Correction of Deterministic Models", The Fourth International Conference on Hydroinformatics, Iowa City, US, 2000, pp 45-54.
13
[14] Asefa, T., Kemblowski, M. W., "Support Vector Machines Approximation of Flow and Transport Models in Initial Groundwater Contamination Network Design", Transactions of American Geophysical Union, 2002, 83 (2), 47-59.
14
]15[ غضنفری هاشمی، س.، اعتماد شهیدی، ا.، "پیشبینی عمق آبشستگی اطراف پایه پل با استفاده ازماشینهای بردار پشتیبان"، عمران مدرس، 1391، 12 (2)، 23-36.
15
[16] Shamseldin, A. Y., O’Connor, K. M., Liang, G. C., "Methods for Combining the Outputs of Different Rainfall-Runoff Models", Journal of Hydrology, 1997, 197 (1-4), 203-229.
16
[17] Bates, J. M., Granger, C. W. J., "The Combination of Forecasts", Operations Research Quarterly, 1969, 20 (4), 451-468.
17
[18] Firat, M., Gungor, M., "Generalized Regression Neural Networks and Feed Forward Neural Networks for Prediction of Scour Depth Around Bridge Piers", Advances in Engineering Software, 2009, 40 (8), 731-737.
18
[19] Granger, C. W. J., Terasvirta, T., "Experiments in Modeling Nonlinear Relationships Between Time Series", In Casdagli M and Eubank S (Eds.), "Nonlinear Modeling and Forecasting", Redwood City, CA: Addison-Wesley, 1992.
19
[20] Lebaron, B., "Nonlinear Forecasts for the S and P Stock Index", In Casdagli M and Eubank S (Eds.), Nonlinear Modeling and Forecasting. Redwood City, CA: Addison-Wesley, 1992.
20
[21] Batchelor, R., Dua, P., "Forecaster Diversity and the Benefits of Combining Forecasts", Management Science, 1995, 41 (1), 68-75.
21
[22] Yip, D. H. F., Hines, E. L., Yu, W. H., "Application of Artificial Neural Networks in Sales Forecasting", International Conference on Neural Networks (ICNN ’97), Houston, 1997, pp 2121-2124.
22
[23] Thiesing, F. M., Vornberger, O., "Sales Forecasting Using Neural Networks", International Conference on Neural Networks (ICNN ’97), Houston, 1997, pp 2125-2128.
23
[24] See, L., Openshaw, S. A., "Hybrid Multi-Model Approach to River Level Forecasting", Hydrological Sciences Journal, 2000, 45 (4), 523-536.
24
[25] Nasseri, M., Zahraie, B., Ajami, N. K., Solomatine, D. P., "Monthly Water Balance Modeling: Probabilistic, Possibilistic and Hybrid Methods for Model Combination and Ensemble Simulation", Journal of Hydrology, 2014, 511, 675-691.
25
[26] Zhao, W., Wang, J., Lu, H., "Combining Forecasts of Electricity Consumption in China Withtime-Varying Weights Updated by a High-Order Markov Chain Model", Omega, 2014, 45, 80-91.
26
[27] Laursen, E. M., Toch, A., "Scour Around Bridge Piers and Abutments", Bulletin No. 4, Iowa Highway Research Board, Ames, Iowa, US, 1956.
27
[28] Shen, H. W., Schneider, V. R., Karaki, S., "Local Scour around Bridge Piers", Journal of the Hydraulics Division, ASCE, 1969, 95, 1919-1940.
28
[29] Shen, H. W., "River Mechanics", Colorado State University, Fort Collins", CO, 1971.
29
[30] Hancu, S., "Sur Le Calcul Des Affouillements Locaux Dams La Zone Des Piles Des Ponts", Proceedings of 14th IAHR Congress, Paris, France, vol. 3, International Association for Hydraulic Research, Delft, The Netherlands, 1971, pp 299-313.
30
[31] Breusers, H. N. C., Nicollet, G., Shen, H. W., "Local Scour around Cylindrical Piers", Journal of Hydraulic Research, 1977, 15 (3), 211-52.
31
[32] Froehlich, D. C., "Analysis of Onsite Measurements of Scour at Piers", National Conference on Hydraulic Engineering, Colorado Springs, CO, US, 1988.
32
[33] Fischenich, C., Landers, M., "Computing Scour. EMRRP Technical Notes Collection (ERDC TN-EMRRP-SR-05)", US Army Engineer Research and Development Center, Vicksburg, US, 1999.
33
[34] Froehlich, D. C., "Upper Confidence Limit of Local Pier-Scour Predictions", Proceedings of Third Bridge Engineering Conference, Denver, Colorado, US, 1991.
34
[35] Blench, T., "Discussion of Scour at Bridge Crossings, by E. M. Laursen", Transactions of American Society of Civil Engineers, 1962, 127, 180-183.
35
[36] Breusers, H. N. C., "Scour around Drilling Platforms", Bulletin of Hydraulic Research, 1965, 19, 276-283.
36
[37] Chitale, S. V., "Scour at Bridge Crossings", Transactions of the American Society of Civil Engineers, 1962, 127, 191-196.
37
[38] Inglis, S. C., "Maximum Depth of Scour at Heads of Guide Banks and Groynes, Pier Noses, and Downstream of Bridges", The Behavior and Control Of Rivers and Canals: Poona, India, 1949.
38
[39] Neill, C. R., "Riverbed Scour-A Review for Engineers: Ottawa, Canada", Canadian Good Roads Association Technical Publication No. 23, 1964.
39
[40] Melville, M. W., "Local Scour at Bridge Sites: New Zealand, University of Auckland", School of Engineering, Project Report No. 117, 1975.
40
[41] Lee, S. O., Sturm, T. W., "Effect of Sediment Size Scaling on Physical Modeling of Bridge Pier Scour", Journal of Hydraulic Engineering, 2009, 135 (10), 793-802.
41
[42] Melville, B. W., Coleman, S. E., "Bridge Scour", Water Resources Publications, Littleton, Co, 2000.
42
[43] Melville, B., "Pier and Abutment Scour: Integrated Approach", Journal of Hydraulic Engineering, 1997, 123 (2), 125-136.
43
[44] Melville, B., Sutherland, A., "Design Method for Local Scour at Bridge Piers", Journal of Hydraulic Engineering, 1988, 114 (10), 1210-1226.
44
[45] Noori, R., Karbassi, A. R., Moghaddamnia, A., Han, D., Zokaei-Ashtiani, M. H., Farokhnia, A., Ghafari Gousheh, M., "Assessment of Input Variables Determination on the SVM Model Performance Using PCA, Gamma Test and Forward Selection Techniques for Monthly Stream Flow Prediction", Journal of Hydrology, 2001, 401 (3-4), 177-189.
45
[46] Dibike, Y. B., Velickov, S., Solomatine, D., Abbott, M. B., "Model Induction with Support Vector Machines: Introduction and Applications", Journal of Computing in Civil Engineering, 2001, 15 (3), 208-216.
46
[47] Han, D., Chan, L., Zhu, N., "Flood Forecasting Using Support Vector Machines", Journal of Hydroinformatics, 2007, 9 (3), 267-276.
47
[48] Wang, W. J., Xu, Z. B., Lu, W. Z., Zhang, X. Y., "Determination of the Spread Parameter in the Gaussian Kernel for Classification and Regression", Neurocomputing, 2003, 55 (3-4), 643-663.
48
ORIGINAL_ARTICLE
مطالعه عددی اثر عرض سیلابدشتهای کانال مرکب منشوری بر روی میدان جریان و اندرکنش بین جریان در کانال اصلی و سیلابدشتها
پیشبینی مشخصات جریان در کانالهای مرکب به علت ماهیت سه بعدی جریان برای مهندسین هیدرولیک امری دشوار تلقی میشود. مشخصه اصلی جریان در کانالهای مرکب منشوری شامل اثر اندرکنش بین جریان سریع در کانال اصلی و جریان کندتر در سیلابدشتها میشود. این اختلاف سرعت سبب ایجاد یک لایه برشی در فصل مشترک بین کانال اصلی و سیلابدشت شده که در نتیجه این امر بین کانال اصلی و سیلابدشتها تبادل اندازه حرکت صورت میپذیرد. نتیجه این امر کاهش ظرفیت انتقال جریان در کانال اصلی و افزایش آن در سیلابدشتها میباشد. در این تحقیق تلاش گردیده است که میدان جریان در کانالهای مرکب منشوری شامل توزیع عرضی سرعت متوسط در عمق و تنش برشی به صورت عددی با استفاده از نرمافزار ANSYS-CFX شبیهسازی گردد. مقایسه نتایج حاصل از شبیهسازی عددی که از حل معادلات ناویر- استوکس متوسطگیری شده رینولدزی با استفاده از مدل آشفتگی k-e به دست آمده، با دادههای آزمایشگاهی نشان میدهد که کم و بیش انطباق خوبی بین آنها وجود دارد. همچنین با استفاده از شبیهسازی عددی به مطالعه تأثیر دبی و هندسه کانال مرکب بر روی اندرکنش جریان بین کانال اصلی و سیلابدشتها پرداخته شده است.
https://ceej.tabrizu.ac.ir/article_5186_c05ff8b89d5fa6860f6d4b1e1c26723e.pdf
2016-08-22
15
24
کانال مرکب
میدان جریان
شبیهسازی عددی
مدل آشفتگی
اندرکنش بین جریان در کانال اصلی و سیلابدشتها
علیرضا
صفارزاده
alirezasafarzade313@gmail.com
1
گروه عمران، دانشکده مهندسی، دانشگاه بوعلی سینا
AUTHOR
بهرام
رضایی
b.rezaei@basu.ac.ir
2
گروه عمران، دانشکده مهندسی، دانشگاه بوعلی سینا
LEAD_AUTHOR
[1] Sellin, R. H. J., "A Laboratory Investigation into the Interaction between Flow in the Channel of a River and That of Floodplain", La Houille Blanche, 1964, 7, 793-801.
1
[2] Ikeda, S., "Role of Lateral Eddies in Sediment Transport and Channel Formation", River Sedimentation, Jayawardena, Lee and Wang, eds., Balkema Rotterdam, 1999, 195-203.
2
[3] Buosmar, D., "Flow Modeling in Compound Channels-Momentum Transfer Between Main Channel and Prismatic and Non-Prismatic Floodplains", PhD Thesis, Universite Catholiqe de Louvian, Belgium, 2002.
3
[4] Rezaei, B., "Overbank Flow in Compound Channels with Prismatic and Non-Prismatic Floodplains", PhD Thesis, University of Birmingham, UK, 2006.
4
[5] Wormleaton, P. R., "Determination of Discharge in Compound Channels using The Dynamic Equation For Lateral Velocity Distribution", International Conference on Fluvial Hydraulics, Belgrade, Hungary, 1988, pp 98-103.
5
[6] Knight, D. W., Shiono, K., Pirt, J., "Prediction of Depth Mean Velocity and Discharge in Natural Rivers With Overbank Flow", International Conference on Hydraulic and Environmental Modelling of Coastal, Estuarine and River Waters, (Ed. R. A. Falconer, P. Goodwin, R. G. S. Mathew), Gower Technical, University of Bradford, September, 1989, pp 419-428.
6
[7] Wark, J. B., Samuel, P. G., Ervine, D. A., "A Practical Method of Estimating Velocity and Discharge in Compound Channels", International Conference On River Flood Hydraulics", (Edited by White, W. R.), Hydraulic Research Ltd., J. Wiley & Sons, September, 1990, pp 163-172.
7
[8] Ervine, D. A., Babaeyan- Koopaei, K., Sellin, R. H. J., "Two-Dimensional Solution for Straight and Meandering Overbank Flows", Journal of Hydraulic Engineering, 2000, 126 (9), 653-669.
8
[9] Naot, D., Nezu, I., Nakagawa, H., "Calculation of Compound Open Channel Flow", Journal of Hydraulic Engineering,1993, 119 (2), 1418-1426.
9
[10] Noat, D., Rodi, W., "Calculation of Secondary Currents in Channel Flow", Journal of Hydraulic Division, 1982, 108 (8), 948-968.
10
[11] Tominaga, A., Nezu, I., "Turbulent Structure in Compound Open Channel Flows", Journal of Hydraulic Engineering, 1991, 117 (1), 21-40.
11
[12] Cokljat, D., Younis, B., "Second Order Closure Study of Open-Channel Flows", Journal of Hydraulic Engineering, 1995, 121 (2), 94-107.
12
[13] Launder, B. E., Reece, G. J., Rodi, W., "Progress in the Development of Reynolds Stress Turbulent Closure", Journal of Fluid Mechanics, 1975, 68, 537-566.
13
[14] MacWilliams, M. L., "Three-Dimensional Hydrodynamic Simulation of River Channels and Floodplains", PhD Thesis, Stanford University, 2004.
14
ORIGINAL_ARTICLE
بررسی رفتار دیوارهای بتنی مجهز به آلیاژهای حافظه شکلی مارتنزایتی
توجه به راهکارهایی که بتوان پس از بارگذاری شاهد کرنشهای پسماند کمتری در دیوارهای برشی بتنی بود همواره مورد توجه پژوهشگران مختلف بوده است. رفتار حافظهشکلی آلیاژهای حافظهدار شکلی این امکان را برای آنها به وجود میآورد که پس از باربرداری با اعمال تنش و یا دما کرنشهای پسماند خود را حذف کنند. از این خاصیت میتوان جهت پیش فشرده کردن دیوارها استفاده نمود. هدف از این مقاله بررسی اثر استفاده از خاصیت حافظه شکلی مواد حافظهدار شکلی در دیوارهای برشی با درصدهای مختلف کاربرد میلگرد آلیاژ حافظهدار شکلی میباشد. همچنین اثر استفاده از خاصیت حافظه شکلی مواد قبل از بارگذاری و اثر پیشفشردگی بتن توسط این خاصیت مورد بررسی قرار میگیرد. به این منظور، با استفاده از نرمافزار اجزای محدود ABAQUS رفتار مدلهای مختلف مورد ارزیابی قرار میگیرند. نتایج حاصل از این تحقیق بیانگر کاهش کرنشهای پسماند در صورت استفاده از میلگردهای آلیاژ حافظه شکلی مارتنزایتی میباشد که البته پیشکشیدگی قبل از بارگذاری بر اساس رفتار حافظه شکلی ضمن افزایش این اثر موجب افزایش مقاومت نیز میگردد.
https://ceej.tabrizu.ac.ir/article_5187_fb886702aacaf63658923f97c572f3e4.pdf
2016-08-22
25
33
آلیاژهای حافظهدار شکلی
دیوار برشی بتنی
رفتار حافظهشکلی
کرنش پسماند
مهدی
قاسمیه
m.ghassemieh@ut.ac.ir
1
دانشکده مهندسی عمران، دانشگاه تهران
LEAD_AUTHOR
مریم
صابردل ساده
saberdel@ut.ac.ir
2
مهندسی زلزله، دانشکده مهندسی عمران، دانشگاه تهران
AUTHOR
مهناز
مصطفی زاده
mahnaz.mostafazadeh@mavs.uta.edu
3
دانشکده مهندسی عمران، دانشگاه تهران
AUTHOR
[1] Graesser, E. J., Cozzarelli, F. A., "Shape Memory Alloys as New Materials for Seismic Isolation", Journal of Engineering Mechanics, 1991, 117 (11), 2590-2608
1
[2] Inaudi, J., Kelly, J., "Experiments on Tuned Mass Dampers Using Viscoelastic, Frictional and Shpe Memory Alloy Materials", First World Conference on Structural Control, 3-5 August, 1994, pp 127-136.
2
[3] Sweeney, S. C., Hayes, J. R., "Shape Memory Alloy Dampers for Seismic Rehabilitation of Existing buildings", 27th Joint Meeting-Wind and Seismic Effects, May, 1995.
3
[4] Clark, P. W., Aiken, I. D., Kelly, J. M., Higashino, M., Krumme, R., "Experimental and Analytical Studies of Shape Memory Alloy Dampers for Structural Control", SPIE Smart Materials Conference 1996.
4
[5] Adachi, Y., Unjoh, S., "Development of Shape Memory Alloy Damper for Inteligent Bridge Systems", SPIE 1999, pp 31-42.
5
[6] Tamai, H., Kitagawa, Y., "Pseudoelastic Behavior of Shape Memory Alloy Wire and its Application to Seismic Resistance Member for Building", IWCMM10, Galway, Ireland, August, 2000.
6
[7] Wilde, K., Gardoni, P., Fujino, Y., "Base Isolation System with Shape Memory Alloy Devices for Elevated Highway Bridges", Engineering Structures, 2000, 22 (3), 222-229.
7
[8] Ohi, K., "Pseudo-dynamic Earthquake Response Tests and Cyclic Loading Tests on Steel Frames Including Pseudo-Elastic Elements", NSF-JSPS, US-Japan Seminar on Advanced Stability and Seismicity Concepts for Performance Based Design of Steel and Composite Structures, Kyoto, Japan, 2001.
8
[9] Dolce, M., Cardone, D., "Mechanical Behavior of Shpaememoru Alloys for Seismic Applications-1. Martensite and Austenite Niti Bars Subjected to Torsion", International Journal of Mechanical Sciences, 2001, 43, 2631-2656.
9
[10] Dolce, M., Cardone, D., "Mechanical Behavior of Shpae Memory Alloys for Seismic Applications-2. Austenite NiTi wires Subjected to Tension", International Journal of Mechanical Sciences, 2001, 43, 2657-77.
10
[11] DesRoches, R., Delemont, M., "Seismic Retrofit of Simply Supported Bridges Using Shape Memory Alloys", Engineering Structures, 2002, 24, 325-332.
11
[12] Ghassemieh, M., Iranmanesh, A. H., "Finite Element Analysis of Framed Strcutures Using Shape Memeory Alloy Braces Subjected to Seismic Loadings", ASME/ASCE/SES Conference on Mechanics and Materials, Baton Rouge, LA, US, 2005.
12
[13] Abolmaali, A., Treadway, J., Aswath, P., Lu, F.k., McCarthy, E., "Hysteresis Behavior of t-stub Connections with Superelastic Shape Memory Fasteners", Journal of Constructional Steel Research, 2006, 62 (8), 831-838.
13
[14] Motahari, S. A., Ghassemieh, M., "Multilinear on E-Dimensional Shape Memory Material Model for Use Instructural Engineering Applications", Engineering Structures, 2007, 29, 904-913.
14
[15] Ghorbani-Renani, I., Velev, N., Tremblay, R., Palermo, D., Massicotte, B., Léger, P., "Modeling and Testing Influence of Scaling Effects on Inelastic Response of Shear Walls", ACI Structural Journal, 2009, 106 (3), 358-367.
15
[16] Brocca, M., Brinson, L. C., Bazant, Z. P., "Three-Dimensional Constitutive Model for Shapememory Alloys Based on Microplane Model", Journal of the Mechanics and Physics of Solids, 2002, 50, 1051-1077.
16
[17] Czaderski, C., Hahnebach, B., Motavalli, M., "RC Beam with Variable Stiffness and Strength", Journal of Construction and Building Materials, 2006, 20, 824-833.
17
ORIGINAL_ARTICLE
ارزیابی مقاومت بتن خودتراکم پلیمری درتیرهای بتن آرمه
در این مطالعه ارزیابی مقاومت بتن خود تراکم حاوی ذرات خرد شده ضایعات لولههای PVC در تیرهای بتن آرمه با ابعاد 35/0×5/0×1/2 متر با استفاده از روشهای مغزهگیری و اولتراسونیک مورد توجه میباشد. دو نسبت آب به مواد پودری 39/0 و 47/0 استفاده شده که میکروسیلیس و پودر سنگ آهک به عنوان پرکننده به کار رفته است. همچنین در صدهای مختلف ذرات خرد شده ضایعات لولههای PVC به میزان 5% و 10% با رعایت محدودیتهای آزمایشات بتن تازه به صورت حجمی جایگزین بخشی از ماسه شده است. نتایج نشان میدهند که روند تغییرات مقاومت بتن در ارتفاع تیرها با استفاده از دو روش یاد شده تقریباً مشابه هم میباشد. با افزایش درصد ذرات PVC تغییرات بیشتر در مقاومت بتن در ارتفاع تیر مشاهده شده است. این افزایش تغییرات برای طرح با نسبت آب به پودر 47/0 حاوی میکروسیلیس مشهودتر بوده که حداکثر تا 11% تغییر بیشتر از بتن کنترل را نشان میدهد.
https://ceej.tabrizu.ac.ir/article_5188_9f3cb6d35af0f8ee5a0b3b3098d67ef1.pdf
2016-08-22
35
46
بتن خودتراکم
ضایعات لولههای PVC
آزمایشات درجا
اولتراسونیک
مغزهگیری
رحمت
مدندوست
rmadandoust@guilan.ac.ir
1
دانشکده فنی، دانشگاه گیلان
LEAD_AUTHOR
اصغر
وطنی اسکوئی
vatani@srttu.edu
2
دانشکده مهندسی عمران، دانشگاه تربیت دبیر شهید رجائی
AUTHOR
میلاد
رجبی جورشری
milad.rajabi84@yahoo.com
3
دانشکده فنی مهندسی، دانشگاه آزاد تاکستان
AUTHOR
[1] Bungey, J. H., Madandoust, R., "Strength Variations in Lightweight Concrete Beams", Cement and Concrete Composites, 1994, 16, 40-55.
1
[2] Khayat, K. H., Mani, K., Trudel, A., "In Situ Mechanical Properties of Wall Element Cast Using Self Consolidating Concrete", ACI Mater Journal, 1997, 94 (6), 291-305.
2
[3] Khayat, K. H., Trembly, S., Paultre, P., "Structural Respouse of Self Consolidating Concrete Columns'', First International RILEM Symp on SCC, 1999, 291-305.
3
[4] Zhu, W., Gibbs, J. C., Bartos, P. J. M., "Uniformity of In Situ Properties of Self-Compacting Concrete in Full-Scale Structural Elements'', Cement and Concrete Composites, 2001, 23, 57-64.
4
[5] Kou, S. C., Lee, G., Poon, C. S., Lai, W. L., "Properties of Lightweight Aggregate Concrete Prepared with PVC Granules Derived From Scraped PVC Pipes'', Waste Management, 2009, 29, 621-628.
5
[6] مدندوست، ر.، حاجتیمدارایی، ع. ا.، کوهستانی، س.، "بررسی تأثیر ضایعات لولههای PVC بر خواص بتن خودتراکم تازه"، ششمین کنگره ملی مهندسی عمران، دانشگاه سمنان، اردیبهشت 1390.
6
[7] مدندوست، ر.، حاجتیمدارایی، ع. ا.، کوهستانی، س.، "بررسی خواص بتن خودتراکم سخت شده حاوی ضایعات لولههای PVC به عنوان مصالح سنگی ریزدانه"، نهمین کنگره بین المللی مهندسی عمران، دانشگاه صنعتی اصفهان، اردیبهشت 1391.
7
[8] BS 882, ''Specification for Aggregates from Natural Sources for Concrete'', UK, 1983.
8
[9] ASTM C1017, "Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete", American Society for Testing and Materials, US, 2007.
9
[10] ASTM C494, "Standard Specification for Chemical Admixtures for Concrete", American Society for Testing and Materials, US, 2013.
10
[11] EFNARC, "Specifacation and Guidelines for Self-Compacting Concrete", European Federation, 2002.
11
[12] Turkel, S., Altuntas, Y., "The Effect of Limestone Powder, Fly Ash and Silica Fume on the Properties of Self-Compacting Repair Mortars" Sadhana, 2009, 34 (2), 331–343.
12
[13] BS 1881 Part120, "Method for Determination of the Compressive Strength of Concrete Cores", British Standard Institution, London, 1983.
13
[14] Concrete Society, "Concrete Core Testing for Strength", Technical Report No.11, London, 1987.
14
[15] سازمان مدیریت و برنامهریزی کشور، "آییننامه بتن ایران (آبا)"، دفتر امور فنی و تدوین معیارها و کاهش
15
خطرپذیری ناشی از زلزله، چاپ هفتم، 1383.
16
ORIGINAL_ARTICLE
تأثیر محصورشدگی فعال و عناصر برشگیر در رفتار خمشی تیر های لولهای فولادی پرشده با بتن
در این تحقیق رفتار خمشی تیرهای مرکب فولادی پرشده با بتن به صورت آزمایشگاهی بررسی شده است. هدف اصلی از این تحقیق، بررسی اثر لغزش بین لوله فولادی با هسته بتنی در رفتار خمشی تیرها بوده است. به منظور بهبود رفتار تیرهای مرکب فولادی پرشده با بتن، از دو روش نصب برشگیر در سطح داخلی لوله و محصورشدگی فعال هسته بتنی استفاده شده است. چهار تیر مرکب در این مطالعه آزمایش شدند. تعبیه برشگیرها و نوع محصورشدگی دو پارامتر اصلی متغیر در این تحقیق بودند. در نهایت، مقاومت خمشی نهایی، انعطافپذیری، مود شکست، وضعیت ترک خوردگی مقطع در لحظه شکست و تغییرات سختی در مرحله الاستیک و پلاستیک تیرهای مرکب، پارامترهایی بودند که بررسی شدند. نتایج حاصله نشان میدهد که تعبیه برشگیر و محصورشدگی فعال، بر روی افزایش ظرفیت خمشی تیر مرکب اثر چشمگیری داشته است. همچنین، نصب برشگیر سبب افزایش بیشتری در ظرفیت خمشی نسبت به محصورشدگی فعال میگردد. به علاوه، تعبیه برشگیر و تغییر نوع محصورشدگی، منجر به رفتار تردتر نمونهها شده است. ضمن این که، نمونهای که در آن برشگیر نصب شده است دارای رفتار بسیار تردتری نسبت به نمونه با محصورشدگی فعال میباشد. به علاوه، در اثر تعبیه برشگیر در نمونه، میزان جذب انرژی نمونه حدود 40 درصد کاهش مییابد. در حالی که، تغییرات میزان انرژی جذب شده با تغییر در نوع محصورشدگی، قابل چشم پوشی میباشد.
https://ceej.tabrizu.ac.ir/article_5194_73da2e17d8913b33166eac562f611b47.pdf
2016-08-22
47
60
محصورشدگی فعال
برشگیر
رفتار خمشی
لوله فولادی پرشده با بتن
بتن تازه
ظرفیت خمشی نهایی
مرتضی
نقی پور
m-naghi@nit.ac.ir
1
دانشکده مهندسی عمران، دانشگاه صنعتی نوشیروانی بابل
LEAD_AUTHOR
مرضیه
نعمتی
marziehnemati1362@gmail.com
2
دانشکده مهندسی عمران، دانشگاه صنعتی نوشیروانی بابل
AUTHOR
جواد
جلالی
javad.jalali@nit.ac.ir
3
دانشکده مهندسی عمران، دانشگاه صنعتی نوشیروانی بابل
AUTHOR
مهدی
نعمت زاده
m.nematzadeh@umz.ac.ir
4
دانشکده فنی و مهندسی، دانشگاه مازندران
AUTHOR
[1] Hosaka, T., Umehara, T., Nakamura, S., Nishiumi, K., "Design and Experiments on a New Rail Way Bridge System Using Concrete Filled Steel Pipes", ASCCS Seminar, Concrete filled steel tubes- a comparison of international codes and practices, ASCCS seminar, Innsbruck, Austria, 1997.
1
[2] Liu, Z., Goel, SC., "Cyclic Load Behavior of Concrete-Filled Tubular Braces", J Struct Div, ASCE 1988; 114 (7), 1488-506.
2
[3] Zhao, XL., Grzebieta, R., Lee C., "Void-Filled Cold-Formed RHS Braces Subjected To Large Deformation Cyclic Axial Loading", J Strcut Engineering, ASCE 2002; 128 (6), 746-53.
3
[4] Hajjar, J., "Concrete-Filled Steel Tube Columns under Earthquake Loads", J. Progress Struct, Engng Mater, 2002 (1), 1-10.
4
[5] Roeder, CW., "Overview of Hybrid and Composite Systems for Seismic Design in the United States", Engng Struct, 1998, 20 (4-6): 355-63.
5
[6] Fukumoto, Y., "Structural Stability Design, Steel and Composite Structures", Oxford: Pergamon, 1997.
6
[7] Karbhari, V. M., "Structural Characterization Of Fiber-Reinforced Composite Short and Medium Span Bridge Systems", in: proceedings of European conference on Composite Materials (ECCM-8), June 1998. P. 35-42.
7
[8] Fam A., Pando, M., Filz, G., Rizakalla, S., "Precast Composite Piles for the Route 40 Bridge in Virginia Using Concrete-Filled FRP Tubes", PCI J 2003, 48 (3), 32-45.
8
[9] Fam, A., Greene, R., Rizkalla, S, "Field Applicationns of Concrete-Filled FRP Tubes for Marine Piles. Field Application of FRP Reinforcement: Case Studies", ACI special publication SP-215-9; 2003, P. 161-80.
9
[10] Bondi, R., "Concrete Filled Tubular Flange Girder Bridge", Modern Techniques in Bridge Engineering: Proceedings of 6th New York City Bridge Conference, 25-26 July 2011, pp. 137-147.
10
[11] Webb, J., Beyton, J. J., "Composite Concrete Filled Steel Tube Columns", In: Proceeding of Structural Engineering Conference, Adelaide: The Institution of Engineers Australia; 1990. Pp. 181-5.
11
[12] Han, L. H., Zhao X. L., Tao, Z., "Tests and Mechanics Model of Concrete-Filled SHS Stub Columns, Columns and Beam-Columns", Steel & Composite Structures- an International Journal 2001, 1 (1), 51-74.
12
[13] Neogi, P. K., Sen, H. K., Chapman, J. C., "Concrete Filled Tubular Steel Columns under Eccentrical Loading", Journal of Structural Engineering 1969, 47 (5), 187-95.
13
[14] Probst, A. D., Kang, T. H. K., Ramseyer, Ch., Kim, U., "Composite Flexural Behavior of Full-Scale Concrete-Filled Tubes without Axial Loads", Journal of Structural Engineering, 2010, 1401-12.
14
[15] ACI Committee 211.1-91. "Standard Practice for Selecting Proportions for Normal, Heavyweight, and Mass Concrete", ACI manual of concrete practice, part 1. Michigan (USA): American concrete institute, 2000. 38.
15
[16] Deng, Y., Tuan, C. Y., Zhou, Q., Xiao, Y., "Flexural Strength Analysis of Non-Post-Tensioned And Post-Tensioned Concrete-Filled Circular Steel Tubes", journal of Constructional Steel Research 67 2011, 192-202.
16
[17] Tomii, M., Sakino, K., "Elasto-Plastic Behavior of Concrete Filled Square Steel Tubular Beam-Columns", Transactions of Architectural Institute of Japan 1979, 280, 111-20.
17
[18] Shawkat, W., Fahmy, W., Fam, A., "Cracking Patterns and Strength of CFT Beams under Different Moment Gradients", Composite Structures 84, 2008, 159-166.
18
[19] Knowles, R. B., Park R., "Strength of Concrete Filled Steel Tubular Columns", Journal of Structural Division, ASCE 1969, 95 1565-1587.
19
[20] Mei, H., Kiiousis, P. D., Ehsani, M. R. Saadatmanesh, H., "Confinement Effects خn High Strength Concrete", ACI structure journal 2001, 98 (4), 548-553
20
[21] Christopher, Y., Tuan, M., "Flexural Behavior of Nonposttensioned and Posttendsioned Concrete-filled Circular Steel Tubes", Journal of Structural Engineering, 2008, 1057-60.
21
[22] Furlong, R. W., "Strength of Steel-Encased Concrete Beam-Columns", Journal of Structural Division, ASCE 1967; 93 (ST5), 113-24.
22
[23] Gardner, J., Jacobson, R., "Structural Behavior of Concrete Filled Steel Tubes", ACI Journal of Structural Division 1967, 64-38:404-13.
23
[24] Ge, H. B., Usami, T., "Strength Analysis of Concrete-Filled Thin-Walled Steel Box Columns", Journal of Constructional Steel Research 1994; 30: 607-12.
24
[25] Han, L. H., "Concrete Filled Steel Tubular Structures", Peking, China: China Science Press; 2000 [in Chinese].
25
[26] Han, L. H., "Tests on Stub Columns of Concrete-Filled RHS Sections", Journal of Constructional Steel Research- an International Journal 2002; 58 (3), 353-72.
26
[27] Kato, B. "Column Curves of Steel-Concrete Composite Concrete Columns", Research Report No. 1/97, School of Civil Engineering, University of Technology Western Australia, 1997.
27
[28] Kilpatrick, A. E., Rangan, B. V., "Tests on High-Strength Composite Concrete Columns", Research Report No. 1/97, School of Civil Engineering, University of Technology Western Australia, 1997.
28
[29] Matsui, C., Tsuda K., Ishibashi Y., "Slender Concrete Filled Steel Tubular Columns under Combined Compression and Bending", Structural Steel, PSSC95, Fourth Pacific Structural Steel Conference, Steel-concrete composite structures, vol. 3. 1995, p.29-36.
29
[30] O Shea, M. D., Bridge, R. Q., "Behavior of Thin-Walled Box Sections with Lateral Restraint", Department of Civil Engineering Research, The University of Sydney, report No. R. 739, 1997.
30
[31] Prion, H. G. L., Boehme, J., "Beam-column behavior of steel tubes filled with high strength concrete", Canadian Journal of Civil Engineering 1994; 21: 207-18.
31
[32] Rangan, B. V., Joyce, M., "Strength of Eccentrically Loaded Slender Steel Tubular Columns Filled With High-Strength Concrete", ACI Structural Journal 1991; 89 (6), 676-81.
32
[33] Schneider, S. P., "Axially Loaded Concrete-Filled Steel Tubes", Journal of structural Engineering, ASCE 1998; 124 (10), 1125-38.
33
[34] Shakir-Khalil, H., Mouli, M., "Further Tests on Concrete-Filled Rectangular Hollow-Section Columns", Structural Engineer 1990; 68 (20), 405-13.
34
[35] Tomii, M., Yashimaro, K., Morishita, Y., "Experimental Studies on Concrete Filled Steel Tubular Stub Column under Concentric Loading", Proceedings of the international colloquium on stability of structures under static and dynamic loads. Washington: SSRC/ASCE, 1977, p. 718-41.
35
[36] Uy, B., "Strength of Concrete Filled Steel Box Columns Incorporating Local Buckling", Journal of Structural Engineering, ASCE 2000; 126 (3), 341-52.
36
[37] Uy, B., "Strength of Short Concrete Filled High Strength Steel Box Columns", Journal of Constructional Steel Research 2001; 57 (2): 113-34.
37
[38] Varma, A. H., Ricles, J. M., Sause, R., Lu, L.W., "Seismic Behavior and Modeling of High-Strength Composite Concrete-Filled Steel Tube (CFT) Beam-Columns", Journal of Constructional Steel Research 2002; 58 (5-8), 725-58.
38
[39] Wang, Y. C., "Tests on Slender Composite Columns", Journal of Constructional Steel Research 1999, 49, 25-41.
39
[40] Han, L. H., Huo J. S., "Concrete-filled HSS Columns after Exposure to ISO-834 Standard Fire", Journal of Structural Engineering, ASCE 2003, 129 (1), 68-78.
40
[41] Uy, B., "Concrete-Filled Fabricated Steel Box Columns for Multistory Buildings: Behavior and Design", Progress in Structural Engineering and Materials 1998; 1 (2), 150-8.
41
[42] Han, L. H., Yao, Gh., "Effects of Pre-Stress in The Steel Tube On The Behavior of Concrete-Filled Steel Tubular Beam-Columns", China Journal of Civil Engineering 2003; 36 (4), 8-18 [in Chinese].
42
[43] Lu, Y. Q., Kennedy, D. J. L., "The Flexural Behavior of Concrete-Filled Hollow Structural Section", Canadian Journal of Civil Engineering 1994, 21 (1): 111-30.
43
[44] Elchalakani, M., Zhao, X. L., Grzebieta, R. H., "Concrete-Filled Circular Steel Tubes Subjected to Pure Bending", Journal of Constructional Steel Research 2001, 57 (11), 1141-68.
44
[45] Han, L. H., Lu, H., Yao, G. H., Liao, F. Y., "Further Study on the Flexural Behavior of Concrete-Filled Steel Tubes", Journal of Constructional Steel Research 62 2006, 554-565.
45
[46] Han, L. H., "Flexural Behavior of Concrete-Filled Steel Tubes", Journal of Constructional Steel Research 60 2004, 313-37.
46
[47] Elchalakani, M., Zaho, X. L., Grzebieta, R., "Concrete-Filled Steel Circular Tubes Subjected to Constant Amplitude Cyclic Pure Bending", Engineering Structures 26 2004, 2125-35.
47
[48] Liao, F. Y., Han, L. H., He, Sh. H., "Behavior of CFST Short Column and Beam with Initial Concrete Imperfection: Experiments", Journal of Constructional Steel Research 67 2011, 1922-35.
48
[49] Uenaka, K., Kitoh, H., "Mechanical Behavior of Concrete Filled Double Skin Tubular Circular Deep Beams", Thin-Walled Structures, 2011, 49 (2), 256-263.
49
[50] Kang, J. Y., Choi, E. S., Chin, W. J., Lee, J. W., "Flexural Behavior of Concrete-Filled Steel Tube Members and Its Applications", Steel Structures 7 2007, 319-324.
50
[51] Kim, Y. H., You, S. K., Jung, J. H., Yoon, S. J., "Strengthening Effects of the Shear Key on the Flexural Behavior of Concrete Filled Circular Tube", Steel Structures 6 2006, 183-190.
51
[52] Hosaka, T., Umehara, T., Nakamura, S., Nishiumi K., "Design and Experiments on a New Railway Bridge System Using Concrete Filled Steel Pipes", ASCCS seminar; concrete filled steel tubes, a comparison of international codes and practice 1997, Innsbruck, Austria: 367-372.
52
[53] Nakamura, S., Momiyama, Y., Hosaka, T., Homma, K., "New Technologies of Steel/Concrete Composite Bridges", Journal of civil engineering 2002, 58: 99-130.
53
[54] Tomii, M., Sakino, K., "Experimental Studies on the Ultimate Moment of Concrete Filled Square Steel Tubular Beam-Columns", Translation AIJ 1979, 275, 55-65.
54
[55] Tuan, C. Y., "Aurora Arch Bridge-Confined Concrete System Speeds Construction of Walkway Span", Concrete International 2004; 26 (4), 64-7.
55
[56] Nematzadeh, M., Naghipour, M., "Compressing Fresh Concrete Technique and the Effect of Excess Water Content on Physical-Mechanical Properties of Compressed Concrete", Materials and Design 2012; 37, 256-267.
56
[57] Nematzadeh, M., Naghipour, M., "Compressive Strength and Modulus of Elasticity of Freshly Compressed Concrete", Construction and Building Materials 34, 2012, 476-485.
57
[58] Naghipour, M., Nematzadeh, M., Jalali, J., Salari, A., Nemati, S. T., "Hardened Density of Freshly Compressed Concrete and Its Effect on Mechanical Properties”, European journal of environment and civil engineering 2015; 19 (6), 733-755.
58
[59] Nemati, M., Naghipour, M., Jalali, J., Nematzadeh, M., "Investigate Effective Factors on The Behavior of Concrete Filled Steel Tube Beams", submitted for publication.
59
[60] ASTM A370-10, "Standard Test Methods and Definitions for Mechanical Testing of Steel Products", ASTM International, West Conshohocken, PA, 2010, www.astm.org.
60
[61] ACI Committee 211.1-91, "Standard Practice for Selecting Proportions for Normal, Heavyweight, and Mass Concrete", ACI manual of concrete practice, part 1. Michigan (USA): American concrete institute; 2000, P.38.
61
62
ORIGINAL_ARTICLE
مطالعه آزمایشگاهی پارامترهای آبشستگی بالادست اریفیس مربعی تحت هد ثابت
عوامل متعددی در رسوبشویی بالادست اریفیس نقش دارند که یکی از مهمترین آنها شکل اریفیس میباشد. بررسیهای متعددی در زمینه آبشستگی تحت شرایط هدهای کاهشی در پشت اریفیسها صورت گرفته است؛ ولی در مورد شرایط هدهای ثابت، اطلاعات زیادی در دسترس نیست. در این مقاله، مکانیزم آبشستگی و پارامترهای حفره آبشستگی بالادست اریفیس مربعی تحت شرایط هد ثابت، برای ارتفاع های مختلف آب و اندازه رسوبات ریزدانه و درشتدانه مورد مطالعه قرار گرفت. از نتایج آزمایشات مشخص شد که گردابههای ایجاد شده در محدوده حفره آبشستگی عامل اصلی انتقال رسوبات و ایجاد حفره بودهاند. با انجام آزمایشات بستر ثابت، محدوده تنش برشی بستر مورد مطالعه قرار گرفت. پروفیلهای بدون بعد عمق حفره آبشستگی در طول محور مرکزی اریفیس و پروفیلهای بدون بعد عمق حفره آبشستگی در مسیر عرض حفره آبشستگی در مکانهای مختلف بالادست اریفیس به دست آمده و معادلات مربوط به هرکدام محاسبه گردید که با اختلاف ناچیزی شبیه به هم به دست آمدند. الگوی جریان و مؤلفههای سرعت در بالادست اریفیس در هر دو نوع بستر ثابت و متحرک با استفاده از دستگاه سرعتسنج صوتی سهبعدی (ADV) مورد بررسی قرار گرفت. هرگاه ویژگیهای جریان در نزدیکی اریفیس به اریفیس آزاد تمایل پیدا میکرد، آبشستگی به سمت شرایط تعادل پیش میرفت.
https://ceej.tabrizu.ac.ir/article_5190_85bb8a3556f86a4dfa1d8c897488ed5f.pdf
2016-08-22
61
71
اریفیس مربعی
حفره آبشستگی
سرعتسنج سهبعدی
مکانیسم انتقال رسوب
فعالیت گردابه
حسن
وثوقی
h_hajikandi@iauctb.ac.ir
1
دانشکده فنی مهندسی، دانشگاه آزاد اسلامی واحد تهران مرکزی
AUTHOR
هومن
حاجی کندی
qalan_vosoughi@yahoo.com
2
دانشکده فنی مهندسی، دانشگاه آزاد اسلامی واحد تهران مرکزی
LEAD_AUTHOR
[1] Fang, D., Cao, S., "An Experimental Study on Scour Funnel In Front Of A Sediment Flushing Outlet of A Reservoir", Proceedings of the 6th Federal Interagency Sedimentation Conference, Las Vegas, 1996, pp I78-I84.
1
[2] Atkinson, E., ''The Feasibility of Flushing Sediments from Reservoirs'', Report OD, 137, HR Wallingford, UK, 1996.
2
[3] Wen Shen, H., ''Flushing Sediment Through Reservoirs'', Journal of Hydraulic Research, 1999, 37, 6, 743-757.
3
[4] Basson, G. R., Olsen, K. W., ''Modeling Flood Flushing'', Water Power and Dam Construction, 1997, 49, 6, 40-41.
4
[5] Olsen, N. R. B., ''Two-Dimensional Numerical Modeling of Flushing Processes In Water Reservoirs'', Journal of Hydraulic Research, 1999, 37, 1, 3-16.
5
[6] Liu, J., Minami, S., Otsuki, H., Liu, B., Ashida, K., ''Prediction of Concerted Sediment Flushing'', Journal of Hydraulic Engineering, 2004, 130, 11, 1089-1096.
6
[7] Hunt, B., ''Numerical Solution of an Integral Equation for Flow from a Circular Orifice'', Journal of Fluid Mechanics, 1968, 31, 2, 361-377.
7
[8] Michell, J. H., ''On the Theory of Free Streamlines'', Philosofical Transactions of the Royal Society of London, 1890, 181, A, 389-431.
8
[9] Mises, R. ''Berechnung Von Ausfluss Und Uberfallzahlen'', Z ver Deuts Ing, 1917, 61, 447.
9
[10] Lea, F. C., ''Hydraulics for Engineers and Engineering Students'', 6th Edition, London, 1938.
10
[11] Rouse, H.,. ''Elementary Mechanics of Fuids'', Wiley & Sons, New York, 1946.
11
[12] Swamee, P. K., Swamee, N., ''Discharge Equation of a Circular Sharp-Crested Orifice'', Journal of Hydraulic Research, 2010, 48, 1, 106-107.
12
[13] Montes, J. S., ''Potential Flow Solution to 2D Transition From Mild to Steep Slope'', Journal of Hydraulic Engineering, 1994, 120, 5, 601-621.
13
[14] Anayiotos, A. S., Perry, G. J., Myers, J. G., Green, W. G., Fan, P. H., Nanda, N. C., ''A Numerical and Experimental Investigation of The Flow Acceleration Region Proximal to an Orifice'', Ultrasound in Medicine and Biology, 1995, 21, 1, 501-516.
14
[15] Chanson, H., Aoki, S. I., Maruyama, M., ''Unsteady Two-Dimensional Orifice Flow: A Large Size Experimental Investigation'', Journal of Hydraulic Research, 2002, 40, 1, 63-71.
15
[16] Shammaa, Y., Zhu, D. Z., Rajaratnam, N., ''Flow Upstream of Orifices and Sluice Gates'', Journal of Hydraulic Engineering, 2005, 131, 2, 127-133.
16
[17] Bryant, D. B., Khan, A. A., Nadim, N. M., ''Flow Field Upstream of an Orifice'', Journal of Hydraulic Engineering, 2008, 134, 1, 98-104.
17
[18] Powell, N. P., Khan, A, A., ''Scour Upstream of a Circular Orifice under Constant Head'', Journal of Hydraulic Research, 2012, 50, 1, 28-34.
18
[19] Montes, J. S., ''I Rotational Flow and Real Fluid Effects under Planar Sluice Gate'', Journal of Hydraulic Engineering, ASCE, 1997, 123, (3), 219-232.
19
[20] Montes, J. S., ''Hydraulics of Open Channel Flow'', ASCE Press, New York, US, 1998.
20
[21] Nortek., ''10 MHz ADV Precise Measurements of 3-D Fluid Flow'', Nortek AS, Norway, 2004.
21
[22] Wu, W., ''Computational River Dynamics'', Taylor & Francis, Oxford, UK, 2008.
22
[23] Dey, A., Barbhuiya, A. K., ''3D Flow Field in A Scour Hole at A Wing-Wall Abutment'', Journal of Hydraulic Research, 2006, 44, 1, 33-50.
23
[24] Powell, N. P., ''Sediment Transport Upstream of Orifices'', PhD Thesis, Clemson University, Clemson SC, US, 2007.
24
ORIGINAL_ARTICLE
پیشبینی خسارت لرزهای سازههای خمشی فولادی به کمک شبکه عصبی
تاکنون روابط مختلفی جهت محاسبه خسارت لرزهای سازهها از جمله شاخصهای خسارت بر اساس شکلپذیری، استهلاک انرژی و ترکیب شکلپذیری و استهلاک انرژی ارائه شده است. برای ارزیابی خسارت یک سازه در مقابل زلزلهای که تجربه میکند، نیاز به انجام تحلیل دینامیکی غیر خطی میباشد و چون این روش زمان طولانی برای به دست آوردن پاسخ سازه در مقابل بار لرزهای نیاز دارد، در این مقاله ضمن ارائۀ شاخص جدیدی که شاخص خسارت بر اساس کاهش سختی نامیده شده است، یک شبکه عصبی تربیت و معرفی شده است که به کمک آن با صرف زمان بسیار کم، وضعیت خسارت سازه را برای انواع شاخصهای خسارت در مقابل بار لرزهای پیشبینی میکند؛ به طوری که با نتایج تحلیل دقیق آن مطابقت نسبی دارد. غلبه بر پیچیدگیهای مرتبط با مشخصات زلزله و تنظیم شبکه برای کارکرد مناسب برای انواع سازه ها از نقاط قوت این شبکه است. شبکۀ پیشنهادی میتواند توسط نرم افزارهای تحلیل و طراحی برای پیشبینی خسارت سازه به کار رود.
https://ceej.tabrizu.ac.ir/article_5191_d9f6079fb92e1ffdc10f41c6e9ee5654.pdf
2016-08-22
75
86
شاخص خسارت
قاب خمشی فولادی
شبکه عصبی
تحلیل دینامیکی غیر خطی
حمید
محرمی
hamid.moharrami@gmail.com
1
دانشکده مهندسی عمران و محیط زیست، دانشگاه تربیت مدرس تهران
LEAD_AUTHOR
سیدحسن
مدنی
hassan.madani@gmail.com
2
دانشکده مهندسی عمران و محیط زیست، دانشگاه تربیت مدرس تهران
AUTHOR
[1] منهاج، م. ب.، "هوش محاسباتی (جلد اول) مبانی شبکههای عصبی"، مرکز نشر دانشگاه امیرکبیر، 1381.
1
[2] NeuralWare, "Neuralworks Predict for Excel 7.0, User Manual", NeuralWare Inc., Copyright, 1994.
2
[3] Powell, H., G., Allahabadi, R., "Seismic Damage Prediction by Deterministic Methods: Concepts and Procedures", Earthquake Engineering and Structural Dynamics, 1988, 16 (5), 719-734.
3
[4] Williams, M. S., Sexsmith, R. G., "Seismic Damage Indices for Concrete Structure: A State-of-art review", Earthquake Spectra, May 1995, 11 (2), 319-349.
4
[5] Cosenza, E., "The use of Damage Functionals in Earthquake Engineering: A Comparison between Different Methods", Earthquake Engng. Struct. Dyn. 1993, 22 (10), 855-868.
5
[6] Park, Y. J., Ang, A. H. S., "Mechanistic Seismic Damage Model for Reinforced Concrete", Journal of Structural Engineering, ASCE, 1985, 111 (4), 722-739.
6
[7] Ghobarah, A., Abou-Elfath, H., Biddah, A., "Response-Based Damage Assessment of Structures", Earthquake Engng. Struct. Dyn. 1999, 28 (1), 79-104.
7
[8] مدنی، س.، ح.، "تعیین ارتباط بین اندیسهای مختلف خسارت و کاهش سختی قاب خمشی فولادی به منظور تعیین میزان تحمل سازه خسارت دیده با یک شاخص ساده"، پایاننامه کارشناسی ارشد، دانشکده عمران و محیط زیست، دانشگاه تربیت مدرس، تهران، 1385.
8
[9] CE 113, "Mechanics of Materials Laboratory", Laboratory Manual, Department of Civil and Environmental Engineering, San Jose State University, August 12, 2006.
9
ORIGINAL_ARTICLE
پیشبینی غلظت آلایندههای گازی در هوای شهر تبریز با استفاده از شبکه عصبی
آلودگی هوا به عنوان یک چالش مهم در شهرهای بزرگ مطرح میباشد که در نتیجه صنعتی شدن، گسترش شهرنشینی، رشد سریع ترافیک و افزایش فعالیتهای انسان تشدید شده است. آلایندههای هوا باعث بروز اثرات منفی بر سلامت انسان و تخریب محیط زیست شده لذا آگاهی از غلظت آلایندهها میتواند به عنوان اطلاعات کلیدی در برنامههای کنترل آلودگی مورد استفاده قرار گیرد. روشهای متعددی برای پیشبینی غلظت آلایندههای هوا وجود دارد و در این میان، در سالهای اخیر پیشرفت قابل توجهی در توسعه مدلهای شبکه عصبی برای پیشبینی غلظت آلاینده های هوا صورت گرفته است. در این مطالعه، از شبکههای عصبی مصنوعی به منظور پیشبینی غلظت آلایندههایCO، SO2 و NOXدر هوای شهر تبریز استفاده شده است. دادههای غلظت آلایندهها از ایستگاه سنجش ثابت مستقر در میدان نماز و دادههای هواشناسی شامل سرعت و جهت باد، دما و رطوبت هوا از اداره کل هواشناسی جمعآوری شده و پس از نرمالسازی به عنوان متغیرهای ورودی شبکه عصبی مورد استفاده قرار گرفت. تعداد 5-3 لایه مخفی و 25-8 نرون در هر لایه مخفی نتایج قابل قبولی داشته است. از تابع تانژانت سیگموئید به عنوان تابع انتقال و الگوریتم لونبرگ مارکوآت برای بهینهسازی وزنها و بایاسهای شبکه استفاده شد. بر اساس نتایج به دست آمده، شبکه عصبی مصنوعی روشی قابل اعتماد برای پیشبینی غلظت ساعتی آلایندههای هوا بوده به طوری که، ضریب همبستگی بالای 90/0 بین غلظت آلایندههای پیشبینی شده و غلظت واقعی آلایندههای CO، SO2 و NOX به دست آمد.
https://ceej.tabrizu.ac.ir/article_5192_d538da6a41bb48b1b634f4d927cdc03b.pdf
2016-08-22
87
94
آلودگی هوا
شبکه عصبی مصنوعی
مدلهای پیشبینی
ناهیده
محمدی
mohammadinahideh@yahoo.com
1
کمیته تحقیقات دانشجویی، دانشگاه علوم پزشکی تبریز
AUTHOR
خالد
ظروفچی بنیس
kh.zoroufchi.b@gmail.com
2
دانشکده مهندسی شیمی، مرکز تحقیقات مهندسی محیط زیست، دانشگاه صنعتی سهند
AUTHOR
محمد
شاکر خطیبی
shakerkhatibim@tbzmed.ac.ir
3
گروه مهندسی بهداشت محیط، دانشکده بهداشت، دانشگاه علوم پزشکی تبریز
LEAD_AUTHOR
اسماعیل
فاتحی فر
fatehifar@gmail.com
4
دانشکده مهندسی شیمی، مرکز تحقیقات مهندسی محیط زیست، دانشگاه صنعتی سهند
AUTHOR
علیرضا
بهروز سرند
alireza.behroozsarand@gmail.com
5
گروه مهندسی شیمی، دانشگاه صنعتی ارومیه
AUTHOR
امیر
محمودیان
amirmahmoudian1990@gmail.com
6
کمیته تحقیقات دانشجویی، دانشگاه علوم پزشکی تبریز
AUTHOR
فرید
شیخ الاسلامی
f.sheikholeslami@yahoo.com
7
کمیته تحقیقات دانشجویی، دانشگاه علوم پزشکی تبریز
AUTHOR
[1] Karaca, F., Nikov, A., Alagha, O., "NN-Airpol: A Neural-Networks-Based Method for Air Pollution Evaluation and Control", International Journal of Environment and Pollution, 2006, 28 (3/4), 310-325.
1
[2] WHO, "Fact Sheet on Outdoor Air Pollution (No 313): Air Quality and Health", http://www.who.int/mediacentre/factsheets/ fs313/en/index.html, 2008.
2
[3] Anderson, H. R., "Air Pollution and Mortality: A History", Atmospheric Environment, 2009, (43), 142-152.
3
[4] Jiang, D., Zhang, Y., Hu, X., Zeng, Y., Tan, J., Shao, D., "Progress in Developing an ANN Model for Air Pollution Index Forecast", Atmospheric Environment, 2004, 38 (40), 7055-7064.
4
[5] Boznar, M., Lesjak, M., Mlakar, P., "A Neural Network-Based Method for Short-Term Prediction of Ambient SO2 Concentrations in Highly Polluted Industrial Areas of Complex Terrain", Atmospheric Environment, 1993, 27B (2), 221-230.
5
[6] Gardner, M. W., Dorling, S. R., "Neural Network Modeling and Prediction of Hourly NOX and NO2 Concentrations in Urban Air in London", Atmospheric Environment, 1993, 33, 709-719.
6
[7] Postolache, O., Girao, M., Pereira, M., "Neural Network Application in a Carbon Monoxide Measurement System", International Joint Conference on Neural Network, 2001, 3, 2076-2081.
7
[8] Hooyberghs, J., Mensink, C., Dumont, G., Fierens, F., Brasseur, O., "Neural Network Forecast for Daily Average PM10 Concentrations in Belgium", Atmospheric Environment, 2005, 39, 3279-3289.
8
[9] Ming, C., Yafeng, Y., Min, X., "Prediction of Hourly Air Pollutant Concentrations near Urban Arterials Using Artificial Neural Network Approach", Transportation Research, 2009, 14, 32-41.
9
[10] Hrust, L., Klaic, Z. B., Krizan, J., Antonic, O., Hercog, P., "Neural Network Forecasting of Air Pollutants Concentrations Using Optimized Temporal Averages of Meteorological Variables and Pollutant Concentrations", Atmospheric Environment, 2009, 43, 5588-5596.
10
[11] Mousavi, M. S., Rahimi, A., "The Application of Artificial Neural Network in Prediction of CO Concentration: A case study of Tabriz", Iranian Journal of Natural Resources, 2008, 61 (3), 681-691.
11
[12] Bodaghpour, S., Charkhestani, A., "Prediction of Gas Pollutants Concentration by Means of Artificial Neural Network in Tehran Urban Air", Journal of Environmental Science and Technology, 2011, 13 (1), 1-10.
12
[13] Arhami, M., Kamali, N., Rajabi, M. M., "Predicting Hourly Air Pollutant Levels Using Artificial Neural Networks Coupled with Uncertainty Analysis by Monte Carlo Simulations", Environmental Science and Pollution Research, 2013, 20, 4777-4789.
13
[14] Shakerkhatibi, M., Mohammadi, N., Zoroufchi Benis, K., Behrooz Sarand, A., Fatehifar, E., Asl Hashemi, A., "Using ANN and EPR Models to Predict Carbon Monoxide Concentrations in urban Area of Tabriz", Environmental Health Engineering and Management Journal, 2015, 2, 117-122.
14
[15] Shahin, M. A., Jaksa, M. B., Maier, H. R., "State of the Art of Artificial Neural Networks in Geotechnical Engineering", Electronic Journal of Geotechnical Engineering, 2008, 8, 1-26.
15
[16] Giustolisi, O., Doglioni, A., Savic, D. A., Webb, B. W., "A Multi-Model Approach to Analysis of Environmental Phenomena", Environmental Modelling and Software, 2007, 22, 674-682.
16
[17] Demuth, H., Beale, M., "Neural Network Toolbox users Guide", Copyright 1992-2002, by the Math Works, Inc, Version 4, 840PP.
17
[18] Viotti, P., Liuti, G., Di Genova, P., "Atmospheric Urban Pollution: Applications of an Artificial Neural Network (ANN) to the City of Perugia", Ecological Modeling, 2002, 148, 27-46.
18
[19] Calvert, J. G., Orlando, J. J., Stockwell, W. R., Wallington, T. J., "The Mechanisms of Reactions Influencing Atmospheric Ozone", 2015, Oxford University Press.
19
ORIGINAL_ARTICLE
مطالعه رفتار ورقهای اتصال میانی در مهاربندهای 8 هم محور
در این تحقیق رفتار هیسترزیس ورقهای اتصال میانی 14 نمونه مهاربند 8 هممحور مدلسازی شدند. این مدلها در نرمافزار ABAQUS ساخته شدند و تحلیل استفاده شده، از نوع استاتیکی غیر خطی بود. نحوه بارگذاری به صورت چرخهای انجام گرفت که در ابتدا به صورت اعمال بار و سپس شامل اعمال تغییر مکان به سازه شد. ورقهای اتصال با ضخامت مشخص ولی با ابعاد و شکلهای متفاوت به کار رفت. با استفاده از نتایج تحلیلهای انجام شده، رفتار هیسترزیس ورقهای اتصال به دست آمد و این رفتار با نتایج آزمایشگاهی مقایسه گردید و صحت انجام تحقیق توسط نرمافزار آباکوس اثبات شد. سپس تعداد 14 نمونه ورق اتصال که از نظر شکلپذیری و مقاومت دارای اهمیت بیشتری بودند، با هم مقایسه گردیدند. نتیجه نهایی این است که اگر چه وجود سخت کننده در ورق اتصال سبب افزایش مقاومت اتصال میشود، ولی شکلپذیری آن را کم میکند؛ بنابر این افزودن سختکنندههای متعدد و بیرویه در ورق اتصال توصیه نمیشود.
https://ceej.tabrizu.ac.ir/article_5193_e0f34b08b97eb6a44d375c32138090a5.pdf
2016-08-22
95
106
ورق اتصال
منحنی هیسترزیس
ABAQUS
موسی
مظلوم
mazloom@sru.ac.ir
1
دانشکده مهندسی عمران، دانشگاه تربیت دبیر شهید رجایی
LEAD_AUTHOR
وحید
صالحی
vahid_structure@yahoo.com
2
دانشکده مهندسی عمران، دانشگاه تربیت دبیر شهید رجایی
AUTHOR
[1] Astaneh-Asl, A., "Seismic Behavior and Design of Gusset Plates for Braced Frames", Steel Tips, Structural Steel Education Council, Moraga, CA, 1998.
1
[2] AISC, "Seismic Provisions for Structral Steel Buildings", Chicago (IL): American Institute of Steel Construction, US, 2005.
2
[3] Walbridge, S. S., Grondin, G. Y., Cheng, J. J. R., "Gusset Plate Connections Under Monotonic and Cyclic Loading", Canadian Journal of Civil Engineering, 2005, 32, 981-95.
3
[4] Cem, T., "Block Shear Failure of Gusset Plates with Welded Connections", Engineering Structures, 2007, 29, 11-20.
4
[5] Bino, H. B. S., Gilbert, G. Y., Robert, D. G., "Tension and Shear Block Failure of Bolted Gusset Plates", Canadian Journal of Civil Engineering, 2006, 33, 395-408.
5
[6] Aiken, L. D., Mahin, S. A., Uriz, P., "Large-Scale Testing of Buckling-Restrained Brace Frames", Proceedings of Japan Passive Control Symposium, Jpan, 2002.
6
[7] Yam, M. C. H., Cheng, J. J. R., "Behavior and Design of Gusset Plate Connections in Compression", Journal of Constructional Steel Research, 2002, 58, 1143-1159.
7
[8] Astaneh-Asl, A., Subhash, G. C., "Cyclic in-Plane Buckling of Double Angle Bracing", Journal of Structural Engineering, 1984, 110 (9), 2036-2055.
8
[9] Rabinovitch, J. S., Cheng, J. J. R., "Cyclic Behavior of Steel Gusset Plate Connections", Department of Civil and Environmental Engineering, University of Alberta, 1993.
9
[10] Brad, S. Tom, B., "Behavior of Square Hollow Structural Steel Braces with End Connections under Reversed Cyclic Axial Loading", Canadian Journal of Civil Engineering, 2003, 30, 745-753.
10
[11] Gilberto, M. S., Jeffrey, P. A., Constantin, C., "Gusset Plate Connections to Circular Hollow Section Braces under Inelastic Cyclic Loading", Journal of Structural Engineering, 2008, 134 (7), 1252-1258.
11
[12] Zhanga, W., Huanga, M., Zhanga, Y., Sunb, Y., "Cyclic Behavior Studies on I-Section Inverted V-Braces and their Gusset Plate Connections", Journal of Constructional Steel Research, 2010, 6, 407-420.
12
[13] Jung-Han, Y., Charles, R. W., Dawn, L. E., "Analytical Performance Simulation of Special Concentrically Braced Frames", Journal of Structural Engineering, 2008, 134 (6), 881-889.
13
[14] Dawn, L. E., Charles, R. W., David, H., Shawn, J., Brandon, K., "Improved Seismic Performance of Gusset Plate Connections", Journal of Structural Engineering, 2008, 134 (6), 890-901.
14
[15] Jung-Han, Y., Dawn, L. E., Charles, R. W., "Influence of Connection Design Parameters on the Seismic Performance of Braced Frames", Journal of Constructional Steel Research, 2008, 64, 607-623.
15
[16] Yamamoto, K., Akiyama, N., Okumura, T., "Buckling Strength of Gusseted Truss Joints", Journal of Structural Engineering, 1988, 114 (3), 575-590.
16
[17] Crosti, C., Duthinh, D., "A Nonlinear Model for Gusset Plate Connections", Engineering Structures, 2014, 62-63, 135-147.
17
[18] Cui, Y., Asada, H., Kishiki, S., Yamada, S., "Ultimate Strength of Gusset Plate Connections with Fillet Welds", Journal of Constructional Steel Research, 2012, 75, 104-115.
18
[19] Rosenstrauch, P. L., Sanayei, M., Brenner, B. R., "Capacity Analysis of Gusset Plate Connections Using the Whitmore, Block Shear, Global Section Shear, and Finite Element Methods", Engineering Structures, 2013, 48, 543-557.
19
[20] Chou, C. C., Chen, P. J., "Compressive Behavior of Central Gusset Plate Connections for a Buckling-Restrained Braced Frame", Journal of Constructional Steel Research, 2008, 65, 1138-1148.
20
[21] Sheng, N. a., Yam, C. H. B., Iu, V. P. C., "Analytical Investigation and the Design of the Compressive Strength of Steel Gusset Plate Connections", Journal of Constructional Steel Research, 2001, 58, 1473-1493.
21
]22[ قلعهنوی، م.، در محمدی طوسی، م. ج.، "بررسی رفتار غیر خطی اتصالات صفحات بادبندی در تراز فونداسیون"، مجموعه مقالات پنجمین کنگره ملی مهندسی عمران، دانشگاه فردوسی مشهد، اردیبهشت ۱۳۸۹.
22
]23[ آقاکوچک، ع. ا.، قلمیفرد، ا.، "بررسی رفتار ورقهای اتصال و مهاربندی فولادی همگرا تحت اثر بارهای یکنواخت و چرخهای"، مجموعه مقالات چهارمین کنگره ملی عمران، دانشگاه تهران، اردیبهشت ۱۳۸۷.
23
]24[ معرفت، م. ص.، خانمحمدی، م.، خسروی، م.، علاقهبندیان، ر.، "مطالعه آزمایشگاهی رفتار لرزهای تیرهای بتن مسلح در ساختمانهای نیمه مهندسی تحت اثر بارهای رفت و برگشتی و یک طرفه"، نشریه دانشکده فنی دانشگاه تهران، 1384، 39 (3)، 403-413.
24
]25[ " نشریه 264، آییننامه اتصالات در سازههای فولادی"، 1384.
25
]26[ دفتر تدوین و ترویج مقررات ملی ساختمان، "مبحث دهم مقررات ملی ساختمان"، 1387.
26