ORIGINAL_ARTICLE
تعیین عمق مؤثر نفوذ ستون سنگی در شیبهای خاکی با استفاده از روشهای عددی و آزمایشگاهی
پایدارسازی شیبهای خاکی یکی از مسائلِ مهمی است که در کانون توجه مهندسین ژئوتکنیک قرار دارد. یکی از روشهای متداول و مناسب برای مسلح کردن شیروانیهای خاکی استفاده از ستونهای سنگی است. استفاده از روشهای عددی و تحلیلی در پایدارسازی شیبهای خاکی به کمکِ ستون سنگی، از جمله روشهای متداولی است که توسط محققین مختلف مورد بررسی قرار گرفته است. پایداری شیبهای خاکی در اثر عوامل مختلف مانند نیروهای زلزله، تغییر تراز سطح آب زیر زمینی، خاکریزی در بالادست شیب و یا خاکبرداری از پایین دست شیب، تهدید میگردد که همگی این عوامل سبب افزایش نیروهای محرک شده و در نهایت ناپایداری در شیب خاکی پدیدار میگردد. هدف از انجام این پژوهش، مطالعه عددی و آزمایشگاهیِ بررسی عملکرد ستون سنگی و میزان عمق نفوذِ مؤثرِ آن در لایه متراکم، در شیبهای خاکیِ دولایه ماسهای است. در این پژوهش با استفاده از ساخت مدل شیروانی ماسهای و اشباع آن به کمک بارش و سپس اعمال بارگذاری، عمق مناسب نفوذ ستون سنگی در لایه متراکم به دست آمده است که به عنوان نوآوری کار مطرح میگردد. نتایج حاصل از آزمایشگاه به روش تفاضل محدود سه بعدی (FLAC3D) نیز مورد تأیید قرار گرفتهاند. همچنین نتایج مدلسازیهای آزمایشگاهی و تحلیلهای عددی نشان دادهاند که وجود ستون سنگی در وسط شیبِ ماسهای دو لایه تأثیر چشمگیری در افزایش پایداری شیروانی مسلح دارد.
https://ceej.tabrizu.ac.ir/article_7572_d9aafca8e5ce3b053fc58eb0cc45ebe2.pdf
2018-05-22
1
12
10.22034/ceej.2018.7572
شیروانی خاکی
ستون سنگی
خاک دو لایه
پایدارسازی
عمق نفوذ مؤثر
محمد
حاجی عزیزی
mhazizi@razi.ac.ir
1
دانشکده فنی مهندسی، دانشگاه رازی
LEAD_AUTHOR
مسعود
نصیری
nasiri.ma@razi.ac.ir
2
دانشکده فنی مهندسی، دانشگاه رازی
AUTHOR
بدو ک، دیلمقانی ب، "ارزیابی پایداری و نشست خاکریز میانگذر دریاچه ارومیه"، نشریه مهندسی عمران و محیط زیست، جلد 44 (2)، 1393، 60-68.
1
حاجیعزیزی م، نصیری م، "بررسی آزمایشگاهی تأثیر میزان چسبندگی در پایداری شیبهای خاکی مسلح با ستون سنگی"، نشریه مهندسی عمران مدرس، دوره 17 (1)، 1396، 65-78.
2
حاجیعزیزی م، مظاهری ا، "ارائه روشی جدید جهت تعیین جابجایی و نیروهای وارد بر شمعهای نصب شده در شیبهای خاکی"، نشریه مهندسی عمران مدرس، دوره 16 (1)، 1395، 189-198.
3
عاملسخی م، منافی س، "تحلیل پایداری استاتیکی و شبه استاتیکی شیروانیهای خاکی مسلح به ژئوفابریک"، نشریه مهندسی عمران و محیط زیست دانشگاه تبریز، جلد 43 (4)، 1392، 88-96.
4
Abramson LW, Lee T, Sharma S, Boyce G, “Slope stability and stabilization methods”, New York, John Wiley and Sons, 2002.
5
Abusharar SW, Han J, “Two-dimensional deep-seated slope stability analysis of embankments over stone column improvement soft clay”, Engineering Geology, 2011, 120, 103-110.
6
Aboshi H, Ichimoto E, Harada K, Emoki M, “The composer-A method to improve the characteristics of soft clays by inclusion of large diameter sand columns”, Proc., Int. Conf. on Soil Reinforcement., E.N.P.C., 1, Paris, 1979, pp. 211–216,
7
Adalier K, Elgamal A, Meneses J, Baez JI, “Stone columns as liquefaction countermeasure in non-plastic silty soils”, Soil Dyn Earthq Engineering, 2003, 23, 571–584.
8
Ambily AP, Gandhi SR, “Behavior of stone columns based on experimental and FEM analysis”, Journal of Geotechnical and Geoenvironmental Engineering, 2007, 133 (4), 405-415.
9
Balaam NP, Poulos HG, Brown PT, “Settlement analysis of soft clays reinforced with granular piles”, Proc., 5th Asian Conf. on Soil Engineering, Bangkok, Thailand, 1978, pp. 81-92.
10
Barksdale RD, Bachus RC, “Design and construction of stone columns”, Federal Highway Administration, 1983, R.D-83/ 026 Bauer GE.
11
Bergado DT, Singh N, Sim SH, Panichayatum B, Sampaco CL, Balasubramaniam AS, “Improvement of soft Bangkok clay using vertical geotextile band drains compared with granular piles”, Geotextiles and Geomembranes, 1990, 9 (3), 203–231.
12
Black JA, Sivakumar V, Madhav MR, Hamill, G. A., “Reinforced stone columns in weak deposits: laboratory model study”, Journal of Geotechnical and Geoenvironmental Engineering, 2007, 133 (9)1154–1161.
13
Bergado DT, Panichayatum B, Sampaco CL, Miura N, “Reinforcement of soft Bangkok clay using granular piles”, International Geotechnical Symposium on Theory and Practice of Earth Reinforcement, Kyushu, Japan, 1988, pp. 179–184.
14
Bergado DT, Chai JC, Alfaro MC, Balasubramanium AS, “Improvement Techniques of soft Ground in Subsiding and Lowland Environment”, 1994, Balkema, Rotterdam.
15
Cai F, Ugai K, “Numerical analysis of the stability of a slope reinforced with piles”, Soils and Foundations, 2000, 40, 73–84.
16
Connor SS, Gorski AG, “A timely solution for the Nojoqi Grade landslide. Repair US 101 South of Buellton”, 51st Annual Highway Geology Symposium, Seattle, 2000, pp. 1–11.
17
Cooper MR, Rose AN, “Stone column support for an embankment on deep alluvial soils”, Proceedings of the Institution of Civil Engineers, Geotechnical Engineering, 1999, 37 (1),15–25.
18
Christoulas S, Giannaros C, Tsiambaos G, “Stabilization of embankment foundations by using stone columns”, Geotechnical and Geological Engineering, 1997, 15 (3), 247–258.
19
Datye KR, Nagaraju, SS, “Design approach and field control for stone columns”, Proc. of 10th International Conference on SMFE, Stockholm, 3, pp. 637–640, 1981.
20
Dheerendra BMR, Sitaram N, Shivashankar R, “A Critical Review of Construction, Analysis and Behavior of stone column”, Geotech Geol Engineering, 2013, 31 1–22.
21
Fakher A, Jones CJFP, “Discussion on bearing capacity of rectangular footings on geogrid reinforced sand by Yetimoglu, T., Wu, J.T.H., Saglamer, A., 1994” Journal of Geotechical Engineering,1996, 122, 326-327.
22
Gazavi M, NazariAfshar J, “Bearing capacity of geosynthetic encased stone columns”, Geotextiles and Geomembranes, 2013, 38, 26-36.
23
Greenwood DA, “Mechanical improvement of soils below ground surfaces”, In: Proceedings of the ground Engineering conference, Institution of Civil Engineers, London, 1970, pp. 11-22.
24
Greenwood DA, Kirsch K, “Specialist ground treatment by vibratory and dynamic methods. State of the art report. Pilling and ground treatment”, Thomas Telford, London, 1984, pp. 17-45
25
Guetif Z, Bouassida M, Debats JM, “Improved soft clay characteristics due to stone column installation”, Computers and Geotechnics. 2007, 34. pp. 104–111.
26
Hajiazizi M, Nasiri M, “Experimental and numerical study of earth slope reinforcement using ordinary and rigid stone column”, International Journal of Mining and Geo-Engineering, 2018, 52 (1).
27
Hajiazizi M, Nemati E, Nasiri M, Bavali M, Sharifipour M, “Optimal location of stone column in stabilization of sand slope: An experimental and 3D numerical investigation”,Scientia Iranica, Article In Press.
28
Han J, Ye SL, “A theoretical solution for consolidation rates of stone column-reinforced foundation accounting for smear and well resistance effects”, International Journal Geomech 2 (2), 2002, 135–151.
29
Han J, Ye SL, “A simplified method for computing consolidation rate of stone column reinforced foundations”, Journal of Geotechnical and Geo-environmental Engineering, ASCE 2001, 127 (7), 597–603.
30
Hughes JMO, Withers NJ, “Reinforcing of soft cohesive soils with stone columns”, Ground Engineering, 1974, 7 (3), 42–49.
31
Hughes JMO, Withers NJ, Greenwood DA, “A field trial of the reinforcing effect of a stone column in soil”, Geotechnique, 1975, 25 (1), pp. 31–44.
32
Heitz C, Kempfert HG, Alexiew D, “Embankment project on soft subsoil with grouted stone column sand geogrids”, In 16th International Conference on Soil Mechanics and Geotechnical Engineering, 2005, Osaka, pp. 1359–1363.
33
Hegde AM, Sitharam TG, “Experimental and numerical studies on protection of buried pipeline sand underground utilities using geocells”, Geotextiles and Geomembranes, Article in press: 2015, 1-10.
34
Kirsch F, Sondermann W, “Field measurements and numerical analysis of the stress distribution below stone column supported embankments and their stability”, In International Workshop on Geotechnics of Soft Soil Theory and Practice, Essen, 2003, pp. 595–600.
35
Keykhosropur, L., Soroush, A., Imam, R., “3D numerical analyses of geosynthetic encased stone columns”, Geotextiles and Geomembranes. 2012, 35, pp. 61–68.
36
Kumar S, “Reduction liquefaction potential using dynamic compaction and construction of stone columns”, Journal of Geotechnical and Geological Engineering, 2001, 19, 169-182.
37
Lee, JS, Pande GN, “Analysis of stone-column reinforced foundations”, International Journal of Numerical and Analytical Methods in Geomechanics. Geomech. 1998, 22, 1001–1020.
38
Mohanty P, Samanta M, “Experimental and numerical studies on response of stone column in layered soil” International Journal of Geosynthics and Ground Engineering, 2015, 27. 1-14.
39
Murugesan, S., Rajagopal, K., “Geosynthetic encased stone columns: Numerical evaluation”, Geotextile and Geomembranes, 2006, 24, pp. 349-358.
40
Madhav MR, Vitkar PP, “Strip footing on weak clay stabilized with a granular trench or pile”, Candian. Geotechnical Journal, 1978, 15 (4), 605–609.
41
Mitchell JK, “Soil improvement-state of the art report”, In: Proceedings of the 10th International Conference on Soil mechanics and foundation Engineering, Stockholm, 1981, pp. 509–565.
42
Munfakh GA, “Soil reinforcement by stone columns-varied case applications”, International Conference In situ Soil Rock Reinforce, 1984, Paris, pp. 157–162.
43
Murugesan S, Rajagopal K, “Geosynthetic-encased stone columns: numerical evaluation”, Geotextile and Geomembrane. 2006, 24, 349–358.
44
Madhav MR, Miura N, “Soil improvement panel report on stone columns”, In Proceedings of the 13th International Conference on Soil Mechanics and Foundation Engineering, New Delhi, India, 1994, pp. 163–164.
45
McKenna JM, Eyre WA, Wolstenholme DR, “Performance of an embankment supported by stone columns in soft ground”, Geotechnique, 1975, 25 (1) 51–59.
46
Priebe HJ, “The design of vibro-replacement”, Ground Engineering, 1995, 28 (12), 31–37.
47
Priebe HJ, “The design of Vibro replacement”, Ground Engineering, 1995, 28 (10), 31–37.
48
Poorooshasb HB, Meyerhof, GG, “Analysis of behavior of stone columns and lime columns”, Computers and Geotechnics, 1996, 20(1), 47–70.
49
Rathgeb E, Kutzner C, “Some applications of the vibro-replacement process”, Geotechnique, 1975, 25 (1), 45–50.
50
Sawwaf M, “Strip footing behavior on pile and sheet pile-stabilized sand slope”, ASCE. 2005, 131 (6), 705-715.
51
Shivashankar R, Dheerendra MR, Nayak S, Rajathkumar V, “Experimental studies on behavior of stone columns in layered soils”, Geotechnic and Geology Engineering, 2011, 29, 749-757.
52
Tan SA, Khine KO, “Finite element modeling of stone columns- a case history”, In 16th International Conference of Soil Mechanics and Geotechnical Engineering, Osaka, 2005, pp. 1425–1428.
53
Vekli M, Aytekin M, Ikizler SB, Calik U, “Experimental and numerical investigation of slope stabilization by stone columns”, Nat Hazards, 2012, 64, 797-820.
54
Vesic AS, “Analysis of ultimate loads of shallow foundations” Soil Mechanics and Foundation, 1973, 99 (1), 45–73.
55
Xanthakos PP, Amberson LW, Bruce D, "Ground control and improvement", New York, John Wiley & Sons, 1994.
56
ORIGINAL_ARTICLE
طراحی بهینه سازه های فضاکار مبتنی بر نظریه قابلیت اطمینان با استفاده از الگوریتم ژنتیک
بهینه سازی سازهها بر اساس نظریه قابلیت اطمینان، با توجه به طبیعت تصادفی پارامترهای سازهای از قبیل خواص مصالح، بارهای خارجی، ابعاد هندسی و غیره مورد توجه ویژهای قرار گرفته است. به کمک نظریه قابلیت اطمینان سیستمهای سازهای، میتوان عدم قطعیتهای ناشی از طبیعت آماری پارامترهای سازهای را به صورت روابط ریاضی درآورد. متعاقباً، میتوان ملاحظات ایمنی و عملکرد را به طور کمی وارد روند طراحی نمود. در این مقاله طراحی بهینه سازههای فضاکار بر اساس کمینه سازی وزن تحت محدودیت قابلیت اطمینان اعضا و سیستم سازهای صورت گرفته است. در این مسیر با همگرایی موضعی و زمان طولانی لازم برای انجام محاسبات قابلیت اطمینان در سازههای بزرگ مقیاس، روبه رو هستیم. هدف از این مقاله ارایه روشی برای رفع این مشکلات میباشد. با در نظر گرفتن شاخص قابلیت اطمینان به عنوان محدودیت طراحی، محاسبات بهینهسازی احتمال اندیشانه برای سازههای بزرگ، در محدوده زمانی بهینه سازی یقین اندیشانه قرار میگیرد. بررسی نتایج نشان میدهد، این الگوریتم در نظر گرفته شده برای بهینه سازی خرپاهای متقارن با بارگذاری متقارن عملکرد بسیار مناسبی از خود نشان میدهد.
https://ceej.tabrizu.ac.ir/article_7574_a98771ec8d5bc28d0a89f97a9ea5bc0f.pdf
2018-05-22
13
22
10.22034/ceej.2018.7574
بهینه سازی
سازههای فضاکار
قابلیت اطمینان
الگوریتم ژنتیک
المان محدود
علی
حدیدی
a_hadidi@tabrizu.ac.ir
1
گروه سازه دانشکده مهندسی عمران دانشگاه تبریز
LEAD_AUTHOR
سیمین
چیت ساز
s.chitsaz89@ms.tabrizu.ac.ir
2
دانشکده فنی مهندسی عمران، دانشگاه تبریز
AUTHOR
American Institute of Steel Construction (AISC), Manual of Steel Construction-Allowable Stress Design. Chicago, 1989.
1
Conceicao CA, Antonio A, “Hierarchical Genetic algorithm For Reliability Based Design of Geometrically Non-Linear Composite Structures”, Composite Structures, 54, 2001, 37-47.
2
Cornell CA, Bounds on the Reliability of structural Systems Journal of Structural Division, ASCE, 1967, 93 no. ST1, 171-200.
3
Davidson JW, Felton LP, Hart GC, “Optimum design of structures with Random Parameters”, Computers and structures, 7, 1977, 481-486.
4
Enevoldsen I, Sorensen JD, “Reliability Based Optimization in structural engineering”, Structural safety, 15, 1994, 169-196.
5
قاسمی م، قلعهنوی م، مستخدمین حسینی ح، "بهینهسازی سازههای خرپایی بر اساس نظریه قابلیت اعتماد به کمک الگوریتم وراثتی"، دانشگاه سیستان بلوچستان، مرداد 1387.
6
Jalalpour M, Guest JK, Igusa T, “Reliability-Based Topology Optimization of Trusses with Stochastic Stiffness”, Structural Safety, 43, 2013, 41-49.
7
Jensen HA, Valdebenito MA, G.I. Schueller, Kusanovic DS, “Reliability-Based Optimization of Stochastic Systems Using Line Search. Comut”, Methods Applied Mechanical Engineering, 198, 2009, 3915-3924.
8
Jiang C, Bi RG, Lu GY, Han X, “Structural Reliability Analysis Using Non-Probabilistic Convex Model”, Comput, Methods Applied Mechanical Engineering 254, 2013, 83-98.
9
کاوه ع و، کلات جاری، ور.، "نظریه قابلیت اعتماد و کاربرد آن در مهندسی سازه"، دانشگاه علم و صنعت ایران، 1373.
10
Lee JO, Yang YS, Ruy WS, “A Comparative Study on Reliability-Index and Target-Performance-Based Probabilistic Structural Design Optimization”, Computers and Structures, 80, 2002, 257-269.
11
Lee KS, Geem ZW, “A New Structural Optimization Method Based on the Harmony Search Algorithm”, Journal of Computer and Structure, 82, 2004, 781-798.
12
Li LJ, Huang ZB, Liu F, “A heuristic particle swarm optimization method for truss structures with discrete variables”, Journal of Computer and Structure, 87, 2009, 435-443.
13
Luit YW, Moses F, “Truss optimization Including Reserve and Residual Reliability Constraints”, Computers and structural, 1992: 42 (3), 355-363.
14
Ma J, Gao W, Wriggers P, Chen J, Sahraee SH, “Structural Dynamic Optimal Design Based on Dynamic Reliability”, Engineering structures, 33, 2011, 468-476.
15
Rajeev S, Krishnamoorthy CS, “Discrete Optimization of Structures Using Genetic Algorithms”, Journal of Structural Engineering, ASCE, 1992, 118, (5), 1233-1250.
16
Sahoo L, Bhunia AK, Kapur PK, “Genetic Algorithm Based Multi-Objective Reliability Optimization in Interval environment”, Computers and Industrial Engineering, 62, 2012, 152-160.
17
Sivanandan SN, Deepa SN, “Introduction to Genetic Algorithms”, Springer-Verlag Berlin Heidelberg 2008.
18
Soh CK, Yang JP, “A genetic algorithm approach for shape optimization of trusses, Journal Compute, Civil Engineering 8, 1994, 309-325.
19
Tao R, Tam ChM, “System Reliability Optimization Model for construction Projects via System Reliability Theory”, Automation in Construction, 22, 2012, 340-347.
20
Togan V, Daloglu A, “Optimun Design of a Truss System under the Constraint of Failure Probability”, The Bulletin of The Istanbul Technical University, 54.
21
Togan V, Daloglu AT, “Optimization of 3D Trusses with Adaptive Approachin Genetic Algorithm”, Engineering Structures, 24, 2006, 1019-1027.
22
Young YL, Baber JW, Motley MR, “Reliability-Based Design and Optimization of Adaptive Marine Structures”, Composite Structures, 244, 2010, 244-253.
23
Yu FH, Gillot M, Ichchou, “Reliability Based Robust Design Optimization for Tuned Mass Damper in Passive Vibration Control of Deterministic/Uncertain Structures”, Sound and Vibration, 332, 2013, 2222-2238.
24
Yuansheng F, Moses F, “Optimum design Redundancy and Reliability of Structural Systems”, Computers and structures, 1986, 24, (2), 239-251.
25
ORIGINAL_ARTICLE
بررسی عددی سهبعدی رفتار سیستم میخگذاری خاک به روش تفاضل محدود
سیستم میخگذاری خاک یکی از روشهای تسلیح خاک میباشد که امروزه به طور گسترده جهت پایدارسازی گودبرداریها مورد استفاده قرار میگیرد. در این میان مدلسازی صحیح سیستم میخگذاری به واسطه روشهای عددی یک شیوه مناسب جهت پیشبینی و کنترل تغییر شکلهای خاک و نیروهای تولید شده در میخها میباشد. در این مقاله به بررسی رفتار سیستم میخگذاری تحت شرایط سرویس و گسیختگی به واسطه روش تفاضل محدود سهبعدی در دو نوع خاک دانهای و چسبنده پرداخته شده و از المانهای سازهای کابل و پوسته به ترتیب جهت اندرکنش صحیح میخ با خاک و رویه با خاک استفاده شده است. بر اساس نتایج به دست آمده از مدلهای ارائه شده، در شرایط سرویس طول نیلهای ردیفهای بالایی کنترل میزان نشست و تغییر شکل تولید شده در سطح دیوار را عهدهدار میباشند در حالی که میخهای پایینی نقش اصلی را در پایداری سیستم میخگذاری در شرایطی که سیستم میخگذاری به سمت گسیختگی میرود دارد. در ضمن شکل سطح لغزش تولید شده در خاک دانهای دوخطی و در خاک چسبنده دایروی همراه با ترک کششی میباشد. در نهایت نیز توصیههایی در مورد نحوه انتخاب طول و قطر میخ و شکل سطح لغزش ارائه گردیده است.
https://ceej.tabrizu.ac.ir/article_7573_0189c2122ddd485d180a84ce5fbbde3b.pdf
2018-05-22
23
33
10.22034/ceej.2018.7573
سیستم میخگذاری
تفاضل محدود سهبعدی
حالت سرویس
حالت حدی
سید کاظم
رضوی
skrazavi2010@gmail.com
1
گروه ژئوتکنیک، دانشکده فنی مهندسی عمران، دانشگاه تبریز
AUTHOR
مسعود
حاجی علیلوی بناب
hajialilue@tabrizu.ac.ir
2
دانشکده مهندسی عمران، دانشگاه تبریز
LEAD_AUTHOR
امیرحسن
رضایی فرعی
rezaei.ah@azaruniv.ac.ir
3
دانشکده فنی و مهندسی، دانشگاه شهید مدنی آذربایجان
AUTHOR
Barley AD, Davies MCR, Jones AM, “Review of current field testing methods for soil nailing”, Proc. of the third international conference on ground improvement geosystems, London , 3-5 June, 1997, 477-483. Proc 3rd
1
Byrne RJ, Cotton D, Porterfield J, Wolschlag C, Ueblacker G, “Manual for design and construction monitoring of soil nail walls”, (No. FHWA-SA-96-069), 1996.
2
Cartier G, Gigan JP, “Experiments and observations on soil nailing structures”, In Proceedings of the Eight European Conference on Soil Mechanics and Foundation Engineering, Helsinki (Vol 2, 473-476), May 1983.
3
Flac 3D version 3.1 User’s guide, Minneapolis (Minnesota, USA), 2006, Itasca Consulting Group, Inc.
4
Franzen G, “Soil nailing-A laboratory and field study of pull-out capacity”, Doctoral thesis, Department of Geotechnical Engineering, Chalmers University of Technology, Sweden, 1998.
5
Hajialilue-Bonab M, Razavi SK, “A study of soil-nailed wall behavior at limit states”, Proceedings of the Institution of Civil Engineers-Ground Improvement, 2015, 169(1), 64-76.
6
Jewell RA, “Review of theoretical models for soil nailing In Performance of Reinforced Soil Structures”, Proceedings of the International Reinforced Soil Conference, Glasgow, 10-12 September, 1991 (265-275).
7
Jewell RA, Pedley MJ, “Soil nailing design: the role of bending stiffness”, Ground Engineering, 1990, 23(2), 30-36.
8
Jewell RA, Pedley MJ, “Analysis for soil reinforcement with bending stiffness”, Journal of geotechnical engineering, 1992, 118(10), 1505-1528.
9
Juran I, Elias V, “Behavior and working stress design of soil nailed retaining structures in Performance of Reinforced Soil Structures”, Proceedings of International Reinforced Soil Conference, British Geotechnical Society, September, 1990, 207-212.
10
Luo SQ, Tan SA, Yong KY, “Pull-out resistance mechanism of a soil nail reinforcement in dilative soils”, Soils and Foundations, 2000, 40(1), 47-56.
11
Plumelle C, Schlosser F, Delage P, Knochenmus G, “French National Research Project on Soil Nailing: Clouterre. In Design and Performance of Earth Retaining Structures”, American Society of Civil Engineers, 1986, 660-675.
12
Razavi SK, Hajialilue Bonab M, “Study of soil nailed wall under service loading condition”, Proceedings of the Institution of Civil Engineers-Geotechnical Engineering, 2017 170(2), 161-174.
13
Schlosser F, “The multicriteria theory in soil nailing”, Ground Engineering, 1991, 24(9), 30-39.
14
Schlosser F, Guilloux A, “Le frottement dans le renforcement des sols”, Revue française de Géotechnique, 1981, 16, 65-77.
15
Shen CK, Herrmann LR, Romstad KM, Bang S, Kim YS, Denatale JS, “An in situ Earth reinforcement lateral support system”, NASA STI/Recon Technical Report, N82, 1981.
16
Smith IM, Su N, “Three‐dimensional FE analysis of a nailed soil wall curved in plan”, International Journal for Numerical and Analytical Methods in Geomechanics, 1997, 21(9), 583-597.
17
Stocker ME, Korcber GW, Gassler G, Gudehus G, “Soil nailing”, international conference on soil reinforcement, January, 1979, 469-474.
18
Su LJ, “Laboratory pull-out testing study on soil nails in compacted completely decomposed granite fill”, Doctoral dissertation, The Hong Kong Polytechnic University, 2006.
19
Su LJ, Yin JH, Zhou WH, “Influences of overburden pressure and soil dilation on soil nail pull-out resistance”, Computers and Geotechnics, 2010, 37(4), 555-564.
20
Singh VP, Babu GS, “2D numerical simulations of soil nail walls”, Geotechnical and Geological Engineering, 2010, 28(4), 299-309.
21
Zhang M, Song E, Chen Z, “Ground movement analysis of soil nailing construction by three-dimensional (3-D) finite element modeling (FEM)”, Computers and Geotechnics, 1999, 25(4), 191-204.
22
ORIGINAL_ARTICLE
ارزیابی ریزساختاری تأثیر همزمان آلاینده فلز سنگین سرب و گازوئیل بر پارامترهای مقاومتی مخلوط ماسه -بنتونیت
امروزه آلودگی خاکها توسط آلایندههای آلی و غیرآلی، به عنوان یک معضل زیستمحیطی در گستره وسیعی مطرح شده است. گازوئیل به عنوان یکی از پرمصرفترین آلایندههای نفتی و سرب به عنوان یکی از خطرناکترین فلزات سنگین به شمار میآید که حضور آنها تهدید بزرگی برای اکوسیستم منطقه است. حضور این آلایندهها در خاک علاوه بر اثرات زیستمحیطی، از نظر ژئوتکنیکی نیز دارای اهمیت زیادی بوده و موجب تغییر رفتار خاک میشود، به همین دلیل ساختار خاکها در حضور این آلایندهها باید مورد ارزیابی قرار گیرند. از اینرو هدف از این پژوهش بررسی تأثیر توأم آلاینده فلز سنگین سرب و آلاینده آلی گازوئیل از منظر ریزساختاری در رفتار ژئوتکنیکی و ژئوتکنیک زیستمحیطی خاک است. در این مقاله پارامترهای مقاومتی خاک از طریق آزمایشهای تراکم و برش مستقیم بر روی نمونههای آلوده و غیرآلوده مورد ارزیابی قرار گرفته است. همچنین پارامترهای ریزساختاری از طریق بررسی ریختشناسی خاک (از طریق آزمایش SEM) مورد بررسی قرار گرفت. نتایج حاصل از آزمایشهای صورت گرفته نشاندهنده افزایش وزن مخصوص خشک بیشینه و کاهش رطوبت بهینه در نمونههای آلوده به هریک از آلایندههای گازوئیل و سرب است. پارامترهای چسبندگی و زاویه اصطکاک داخلی نیز در نمونههای آلوده به گازوئیل به ترتیب افزایش و کاهش یافتهاند، در حالی که در نمونههای آلوده به سرب، کاهش در چسبندگی و عدم تغییر محسوس زاویه اصطکاک داخلی مشاهده شد.
https://ceej.tabrizu.ac.ir/article_7575_98b070b25e638fd41bc2f9ce68560eb9.pdf
2018-05-22
35
42
10.22034/ceej.2018.7575
آلودگی خاک
پارامترهای مقاومتی
ضخامت لایه دوگانه
ریزساختار
سپیده
طاهری
sepideh.taheri68@gmail.com
1
دانشکده مهندسی عمران و محیط زیست دانشگاه صنعتی امیرکبیر
AUTHOR
تقی
عبادی
tebadi@aut.ac.ir
2
دانشکده مهندسی عمران و محیط زیست، دانشگاه صنعتی امیرکبیر
AUTHOR
رضا
مکنون
rmaknoon@yahoo.com
3
دانشکده مهندسی عمران و محیط زیست، دانشگاه صنعتی امیرکبیر
AUTHOR
محمد
امیری
amirii@hormozgan.ac.ir
4
استادیار دانشکده فنی و مهندسی، دانشگاه هرمزگان
LEAD_AUTHOR
اوحدی و، حمیدی ص، امیری م، "اثر آلاینده فلز سنگین بر ضریب تغییرات مقادیر شاخص تراکم، شاخص انبساط، و ضریب نفوذپذیری بنتونیت از منظر ریزساختاری"، نشریه مهندسی عمران و محیط زیست، تبریز، 1394، 45 (4)، 17-7.
1
Sarpkaya T, Isaacson M, “Mechanics of wave forces on offshore structures”, Van Nostrand Reinhold Co. Inc., US, 1981, 165-170.
2
Abousnina RM, Manalo A, Shiau J, Lokuge W, “Effects of light crude oil contamination on the physical and mechanical properties of fine sand”, Soil Sediment Contamination, 2015, 24 (8), 833–845.
3
Ada MAHR, “Performance assessment of compacted bentonite/sand mixtures utilized as isolation material in underground waste disposal repositories”, Master Thesis, Middle East technical university, 2007.
4
Akinwumi II, Diwa D, Obianigwe N, “Effects of crude oil contamination on the index properties, strength and permeability of lateritic clay”, International Journal of Applied Sciences and Engineering Research, 2014, 3(4), 816-824.
5
Al-Sanad HA, Eid WK Ismael NF, “Geotechnical properties of oil-contaminated Kuwaiti sand. Journal of geotechnical engineering”, 1995, 121(5), 407-412.
6
Alston C, Daniel DE Devroy DJ, “Design and construction of sand-bentonite liner for effluent treatment lagoon, Marathon, Ontario”, Canadian geotechnical journal, 1997, 34(6), 841-852.
7
ASTM, “Annual Book of ASTM Standards”, Vol. 4 (8), Philadelphia, US, 1994.
8
Bowders Jr JJ, Daniel DE, “Hydraulic conductivity of compacted clay to dilute organic chemicals”, Journal of Geotechnical Engineering, 1987, 113(12), 1432-1448.
9
Cyrus S, “Studies on the development and control of desiccation cracks in compacted clay liner soils”, 2012.
10
Das BM “Advanced soil mechanics”, CRC Press, 2013.
11
Eltantawy IM, Arnold PW, “Reappraisal of ethylene glycol mono‐ethyl ether (EGME) method for surface area estimations of clays”, Journal of Soil Science, 1973, 24(2), 232-238.
12
EPA, Process designmanual, land application of municipal sludge. Municipal Environmental Research Laboratory. EPA-625/1-83 016, 1983.
13
Hendershot WH Duquette M, “A simple barium chloride method for determining cation exchange capacity and exchangeable cations”, Soil Science Society of America Journal, 1986, 50(3), 605-608.
14
Hesse PR, “A textbook of soil chemical analysis”, 1971.
15
Kashif Uddin M, “A review on the adsorption of heavy metals by clay minerals, with special focus on the past decade”, Chemical Engineering Journal, 2017, 308, 438-462.
16
Kaya A, Fang HY, The effects of organic fluids on physicochemical parameters of fine-grained soils. Canadian Geotechnical Journal, 2000, 37(5), 943-950.
17
Kermani M, Ebadi T, “The effect of oil contamination on the geotechnical properties of fine-grained soils”, Soil and Sediment Contamination”, 2012, 21(5), 655-671.
18
Khamehchiyan M, Charkhabi AH, Taji kM, “Effects of crude oil contamination on geotechnical properties of clayey and sandy soils, Engineering Geology”, 2007, 89(3), 220-229.
19
Khosravi E, Ghasemzadeh H, Sabour MR, Yazdani H, “Geotechnical properties of gas oil-contaminated kaolinite”, Engineering Geology, 2013, 166, 11-16.
20
Li JS, Xue Q, Wang P, Li ZZ, “Effect of lead (II) on the mechanical behavior and microstructure development of a Chinese clay”, Applied Clay Science, 2015, 105, 192-199.
21
Nasehi SA, Uromeihy A, Nikudel MR, Morsali A, “Influence of Gas Oil Contamination on Geotechnical Properties of Fine and Coarse-Grained Soils”, Geotechnical and Geological Engineering, 2016, 34(1), 333-345.
22
Nayak S, Sunil BM, Shrihari S, Sivapullaiah PV, “Interactions between soils and laboratory simulated electrolyte solution”, Geotechnical and Geological Engineering, 2010, 28(6), 899-906.
23
Rehman H, Abduljauwad SN, Akram T, “Geotechnical behavior of oil-contaminated fine-grained soils”, Electronic Journal of Geotechnical Engineering, 2007, 12, 1-12.
24
Schanza T, Vermeera P, “Angles of friction and dilatancy of sand”, 1996.
25
Shariatmadari N, Salami M Fard MK, “Effect of inorganic salt solutions on some geotechnical properties of soil-bentonite mixtures as barriers”, International Journal of Civil Engineering, 2011, 9(2), pp.103-110.
26
Shin EC, Omar MT, Tahmaz AA, Das BM, Atalar C, “Shear strength and hydraulic conductivity of oil-contaminated sand”, Proceedings of Environmental Geotechnics IV (ICEG), Rio de Janeiro, Brazil, 2002, 11-15.
27
Singh S, Prasad A, “Effects of chemicals on compacted clay liner”, Electronic Journal of Geotechnical Engineering, 2007, 12(D), 1-15.
28
Sridharan A, Venkatappa Rao G, “Shear strength behavior of saturated clays and the role of the effective stress concept”, Geotechnique, 1979, 29(2), 177-193.
29
Wang F, Wang H, Jin F, Al-Tabbaa A, “The performance of blended conventional and novel binders in the in-situ stabilization/ solidification of a contaminated site soil”, Journal of hazardous materials, 2015, 285, pp.46-52.
30
ORIGINAL_ARTICLE
برآورد تغذیه طبیعی آب زیرزمینی با استفاده از روش WTF (مطالعه موردی: آبخوان دشت اردبیل)
کمّیسازی مقدار تغذیه آب زیرزمینی پیشنیاز اساسی برای مدیریت کارآمد منابع آب زیرزمینی میباشد. میزان تغذیه آبخوان یکی از مؤلفههای مشکل برای اندازهگیری، در زمان ارزیابی منابع آب زیرزمینی میباشد. شیوههای متعددی برای کمّیسازی مقدار تغذیه مورد استفاده قرار میگیرد. یکی از این شیوهها، نوسانات سطح آب زیرزمینی (WTF) میباشد. سادگی، ارزانی و سهولت استفاده باعث شده این روش در مناطق نیمه خشک مورد توجه قرار گیرد. در این پژوهش، تغذیه طبیعی آبخوان دشت اردبیل با استفاده از روش WTF مورد مطالعه قرار گرفت. نتایج نشان داد که برای دوره آماری 10 ساله (از مهر 1380 تا مهر 1390) میزان متوسط آبدهی ویژه برای آبخوان 084/0 و متوسط کسری از آب بارندگی و آبیاری که موجب تغذیه آبخوان میگردد به ترتیب برابر 84/16 و 53/22 درصد میباشد. در نهایت با به دست آمدن مقادیر پارامترهای مؤثر در تغذیه، متوسط سالانه تغذیهی آب زیرزمینی، معادل 191 میلیون مترمکعب محاسبه گردید.
https://ceej.tabrizu.ac.ir/article_7576_31721b8ab259cad62b98505683a0c6d3.pdf
2018-05-22
43
52
10.22034/ceej.2018.7576
روش WTF
آبدهی ویژه
کسر بارندگی
کسر آبیاری
آبخوان دشت اردبیل
حسین
غفاری
ghafari_h67@yahoo.com
1
گروه مرتع و آبخیزداری، دانشکده فناوری کشاورزی و منابع طبیعی، دانشگاه محقق اردبیلی، اردبیل
AUTHOR
علی
رسول زاده
rasoulzadeh@uma.ac.ir
2
استادیار گروه مهندسی آب دانشگاه محقق اردبیلی
LEAD_AUTHOR
مجید
رئوف
majidraoof2000@yahoo.co.uk
3
گروه مهندسی آب، دانشکده فناوری کشاورزی و منابع طبیعی، دانشگاه محقق اردبیلی، اردبیل
AUTHOR
اباذر
اسمعلی عوری
abazar.esmali@gmail.com
4
گروه مرتع و آبخیزداری، دانشکده فناوری کشاورزی و منابع طبیعی، دانشگاه محقق اردبیلی، اردبیل
AUTHOR
Ahmadi T, Ziaei AN, Davari K, Rasoulzadeh A, Faridhoseini AR, Izadi A, “Estimation of groundwater recharge using various methods in Neishaboor Plain, Iran”, The 5th International Groundwater Symposium, Kuwait, 19-21 November, 2012.
1
Anuraga TS, Ruiz L, Mohan Kumar MS, Sekhar M, Leijnse A, “Estimation of Groundwater Recharge using land use and soil data: A case study in South India”, Agricultural Water Management, 2006, 84, 65-76.
2
Coly Diouf O, Cissé Faye S, Diedhiou M, Kaba M, Faye S, Bécaye Gaye C, Faye A, Englert A, Wohnlich S, “Combined uses of water-table fluctuation (WTF), chloride mass balance (CMB) and environmental isotopes methods to investigate groundwater recharge in the Thiaroye sandy aquifer (Dakar, Senegal)”, African Journal of Environmental Science and Technology, 2012, 6(11), 425-437.
3
Crosbie RS, Binning P, Kama JD, “A time series approach to inferring groundwater recharge using the water table fluctuation method”, Water Resources Research, 2005, 41(1), 1-9.
4
Dages C, Voltz N, Bsaibes A, Prévot L, Huttel O, Louchart X, Garnier F, Negro S, “Estimating the role of a ditch network in groundwater recharge in a Mediterranean catchment using a water balance approach”, Journal of Hydrology, 2009, 375, 498-512.
5
Fazel MA, Imaizumi M, Ishida S, Kawachi T, Tsuchihara T, “Estimating groundwater recharge using the SMAR conceptual model calibrated by genetic algorithm”, Journal of Hydrogy, 2005, 303, 56-78.
6
Ficklin DL, Luedeling E, Zhang M, “Sensitivity of groundwater recharge under irrigated agriculture to changes in climate, CO2 concentrations and canopy structure”, Agricultural Water Management, 2010, 97, 1039-1050.
7
Healy RW, Cook PG, “Using grounwater levels to estimate recharge”, Journal of Hydrogy, 2002, 10, 91-109.
8
Jones JP, Sudicky EA, McLaren RG, “Application of a fully-integrated surface-subsurface flow model at the watershed-scale: A case study”, Water Resources Research, 2008, 44, 1-13.
9
Manghi F, Mortazavi B, Crother C, Hamdi MR, “Estimating regional groundwater recharge using a hydrological budget method”, Water Resource Management, 2009, 23, 2475-2489.
10
Mare´chal JC, Dewandel B, Ahmed S, Galeazzi L, Zaidi FK, “Combined estimation of specific yield and natural recharge in a semi-arid groundwater basin with irrigated agriculture”, Journal of Hydrology, 2006, 329, 281-293.
11
Meteorology website of Ardabil, www.ardebilmet.ir, 2015.
12
Mileham L, Taylor R, Thompson J, Todd M, Tindimugaya C, “Impact of rainfall distribution on the parameterisation of a soil-moisture balance model of groundwater recharge in equatorial Africa”, Journal of Hydrology, 2008, 359, 46-58.
13
Moon SK, Woo NC, Lee KS, “Statistical analysis of hydrographs and water-table fluctuation to estimate groundwater recharge”, Journal of Hydrogy, 2004, 292, 198-209.
14
Qin D, Qian Y, Han L, Wang Z, Li C, Zhao Z, “Assessing impact of irrigation water on groundwater recharge and quality in arid environment using CFCs, tritium and stable isotopes, in the Zhangye Basin, Northwest China”, Journal of Hydrology, 2011, 405, 194-208.
15
Rasoulzadeh A, “Three-Dimensional variable-saturated numerical modeling of groundwater management in a coastal aquifer”, PhD Thesis, Shiraz University, Iran, 2006.
16
Rasoulzadeh A, Moosavi SAA, “Evaluation of uncertainty in parameter estimation of WTF model using inverse method”, The 7th Iranian Hydraulic Conference, Tehran, Iran, 11-13 November, 2008.
17
Samadder RK, Kumar S, Gupta RV, “Paleochannels and their potential for artificial groundwater recharge in the western Ganga plains”, Journal of Hydrogy, 2011, 329, 154-164.
18
Scanlon BR, Healy RW, Cook PG, “Choosing appropriate techniques for quantifying groundwater recharge”, Hydrogeology Journal, 2002, 10, 18-39.
19
Sharda VN, Kurothe RS, Sena DR, Pande VC, Tiwari SP, “Estimation of groundwater recharge from water storage structures in a semi-arid climate of India. Journal of Hydrogy”, 2006, 329, 224-243.
20
Varni M, Comas R, Weinzettel P, Dietrich S, “Application of the water table fluctuation methods to characterize groundwater recharge in the Pampa plain, Argentina”, Hydrological Sciences Journal, 2013, 58(7), 1445-1455.
21
ORIGINAL_ARTICLE
شبیهسازی عددی پخش CO2 در لایه مرزی اتمسفری در اطراف کارخانه آلومینیوم ایران و ارائه مناسبترین الگوی فضای سبز
گاز دیاکسیدکربن (CO2) خروجی از دودکشها در صنایع مختلف به عنوان یکی از منابع عمدة آلودگی هوا و یک عامل مهم در بررسی کیفیت هوا مطرح میباشد. در پژوهش حاضر به مطالعة تأثیر عوامل توپوگرافیک، جوی و ساختمانها بر پخش گاز CO2 از کارخانة آلومینیوم ایران در لایه مرزی اتمسفری پرداخته شده است. موقعیت جغرافیایی کارخانة آلومینیوم ایران واقع در شهرستان اراک، این کارخانه را به عنوان یکی از منابع عمدة آلودگی هوای این شهر صنعتی مطرح کرده است. به علاوه با استفاده از نتایج عددی که در نرمافزار ANSYS FLUENT صورت پذیرفته، تأثیر ساختمانهای شهر بر نحوة پخش آلایندهها با در نظر گرفتن جهت وزش باد مدلسازی شده و مورد صحتسنجی قرار گرفته است. در ادامه به محاسبة فضای سبز مورد نیاز اطراف کارخانه پرداخته و مناسبترین الگوی فضای سبز استخراج شده است. نرخ تجمع گاز CO2 اطراف کارخانه پس از رسیدن تودة بحرانی به سطح زمین در حالت گذرا با در نظر گرفتن واکنش رادیکالهای OH و CO و لحاظ کردن اثرات تهنشست CO2 به روش نیمه تحلیلی و تجربی به ترتیب 09/2 و 15/2 g/(hectar.min) محاسبه گردیده است، همچنین نتایج به دست آمده نشان میدهد وجود رشته کوههای جنوب شهر باعث انتقال نقطه با غلظت بیشینه به 500 متر جلوتر میگردد.
https://ceej.tabrizu.ac.ir/article_7577_8f22b8e2b15f19fc29799cbc38ef77e0.pdf
2018-05-22
53
65
10.22034/ceej.2018.7577
لایه مرزی اتمسفری
پخش آلایندهها
عوامل توپوگرافیک و جوی
گاز دیاکسیدکربن
الگوی فضای سبز
امین
محمدزاده ثانی
amin.mohammadzade2013@gmail.com
1
دانشکده مهندسی مکانیک، دانشگاه علم و صنعت ایران
AUTHOR
حسام
مقدسی
hesam_moghadasi@mecheng.iust.ac.ir
2
دانشکده مهندسی مکانیک، دانشگاه علم و صنعت ایران
AUTHOR
غلامرضا
شهریاری
shahriari@iust.ac.ir
3
دانشگاه علم و صنعت ایران
LEAD_AUTHOR
بختیاروند بختیاری س، سهرابی ه، "قابلیت تجارت کربن از طریقپروژههای جنگلکاری دراطراف مناطق صنعتی"، اولین کنفرانس بینالمللی رویکردهای نوین در نگهداشت انرژی، دانشگاه صنعتی امیرکبیر، تهران، 1390.
1
پناهی پ، پورهاشمی م، حسنینژاد م، "برآورد زیتوده و ذخیرةکربن برگ گونة بنه در باغ گیاه شناسی ملی ایران"، مجلة جنگل ایران، انجمن جنگلبانی ایران، بهار1390، سال سوم، شمارة 1، 1390.
2
پناهی پ، پورهاشمی م، حسنینژاد م، "آلومتری زیتوده و ذخیرةکربن برگ بلوط،های باغ گیاهشناسی ملی ایران"، مجله پژوهشهای گیاهی مجله زیستشناسی ایران، 1393، جلد 27، شماره 1.
3
سرلک م، "تحلیل عناصر موجود در ذرات معلق هوای شهر اراک به روش فعالسازی نوترونی و جذب اتمی و مدلسازی انتشار آلودگی از طریقAERMOD "، پایاننامه کارشناسی ارشد، دانشگاه صنعتی شریف، تهران، 1390.
4
سازمان بوستانها و فضای سبز شهرداری تهران،"عملکرد جنگلکاریهای شهری در جذب گازهای گلخانه"، 1393.
5
شهریاری غ، محمدزاده ثانی ا، "مدلسازی تجمع گاز کربن دیاکسید اطراف کارخانه آلومینیوم ایران (اراک) پس از رسیدن توده بحرانی به سطح زمین"، نخستین همایش ملی توسعه پایدار در سیستمهای مهندسی انرژی، آب و محیط زیست، 30 و 31 اردیبهشت 1394 ، تهران.
6
علیاری شورهدلی م، "پیشبینی رفتار آلایندههای هوای اراک با استفاده از شبکههای عصبی"، پایاننامه کارشناسی ارشد، دانشگاه صنعتی خواجه نصیر، تهران، 1382.
7
قیاسی س، "نقش خاک و نوع پیوند فلزات سنگین دردسترسی بیولوژیکی (مطالعه موردی:کارخانه آلومینیوم ایران واقع در شهر اراک)"، رساله دکتری، دانشگاه علوم و تحقیقات، تهران، 1390.
8
نورپور ع، کاظمی شهابی ن، حسنینژاد، م، "مدلسازی پراکنش آلایندههای هوا خروجی از دودکش کارخانه سیمان ایلام"، نشریه مهندسی عمران و محیط زیست، جلد 44، شماره 1، بهار 1393.
9
Apsley DD, Dyster SJ, McHugh S, “Modelling dry deposition”, 17, Technical Report, 2005.
10
Assael M J, Konstantinos, EK, “Fires, explosions, and toxic gas dispersions: effects calculation and risk analysis”, CRC Press, 2010.
11
Brunekreef B, Holgate S, “Air pollution and health”, The lancet, 2002.
12
Carson JE, Harry M, “The validity of several plume rise formulas”, Journal of the Air Pollution Control Association, 1969, 19(11), 862-866.
13
Crasto G, "Numerical simulations of the atmospheric boundary layer”, Universita degli Studi di Cagliari: Cagliari, Italy, 2007.
14
Fluent Ansys, “16.0 User’s Guide”, Ansys Inc, 2015.
15
Katharina S, “Determination of the atmospheric boundary layer height in complex terrain during SALSA 2005”, Diss. Diploma thesis, University of Bayreuth, Bayreuth, 2006.
16
Khopkar SM, “Environmental pollution monitoring and control”, New Age International, 2007.
17
Materials Committee D-22 on Methods of Sampling and Analysis, “ASTM standards on methods of atmospheric sampling and analysis: methods of testing, recommended practices, definitions”, American Society for Testing and Materials, 1962.
18
Moreira D, Marco V, “Air pollution and turbulence modeling and applications”, CRC Press, 2009.
19
Paul SM, “Gas-phase radical chemistry in the troposphere”, 2005, Chemical Society Reviews, 34(5), 376-395
20
Rigby M, “Air pollution climatology using meteorological reanalysis”, Ph.D. thesis, Imperial college London,London, England, 2007.
21
Schlichting H, Klaus G, “Boundary-layer theory”, Springer Science and Business Media, 2000.
22
Stockie John M, “The mathematics of atmospheric dispersion modeling”, Siam Review 53, no. 2, 2011, 349-372.
23
Westley F, “Table of recommended rate constants for chemical reactions occurring in combustion”, 1980, National Standard Reference Data System, NSRDS-NBS 67.
24
ORIGINAL_ARTICLE
ارزیابی تکنیکهای هوش محاسباتی در پیشبینی سرانه تولید پسماند (مطالعه موردی: استان هرمزگان)
شناخت کمیت پسماندهای یک شهر یا منطقه، لازمه برنامهریزی در زمینه مدیریت پسماند است. روش دستیابی به کمیت پسماندها دانستن سرانه یا نرخ تولید آن است. در خصوص پیشبینی مقادیر سرانه تولید پسماند تا کنون در اکثر مدلهای تدوین شده از دادههای سری زمانی مربوط به منطقه مورد مطالعه استفاده شده است. اما در شرایطی که چنین دادههایی موجود نباشد استفاده از سیستمهای هوشمند پیشبینی نظیر تکنیکهای یادگیری ماشین که بر اساس دادههای اندازهگیری شده در یک سال تدوین شوند، بسیار ﻣﺆثر خواهند بود. از آنجا که دادههای زمانمندی جهت مقادیر سرانه تولید پسماند مناطق جمعیتی ساحلی جنوب ایران جهت طراحی اصولی سیستم مدیریت پسماند وجود نداشته است، در این مطالعه با در نظر گرفتن پارامترهای ارتفاع از سطح دریا، جمعیت، درجه شهری و تناوب جمعآوری پسماند، توانایی روشهای هوشمند MLP، SVM و M5P در پیشبینی سرانه تولید پسماند شهرها و روستاهای ساحلی استان هرمزگان بکار گرفته شده و با هم مقایسه شده است. نتایج حاصله نشان دهنده این است که روش M5P با مقدار مجذور میانگین مربعات خطا (RMSE) (gr/d) 34/55 و میانگین قدر مطلق خطای نسبی (MARE) 26/6 درصد، بهترین عملکرد را نسبت به سایر روشها دارد.
https://ceej.tabrizu.ac.ir/article_7584_d001a733157bf7b622fc4ed6d90102ed.pdf
2018-05-22
67
75
10.22034/ceej.2018.7584
پیشبینی سرانه تولید پسماند
شبکه عصبی پرسپترون
ماشین بردار پشتیبان
مدل درخت تصمیم
محمد
مینوسپهر
m_minousepehr@yahoo.com
1
دانشکده مهندسی، دانشگاه شیراز
AUTHOR
محمدرضا
علیزاده
alizadeh.mohamadreza@yahoo.com
2
دانشکده مهندسی، دانشگاه شیراز
AUTHOR
ناصر
طالب بیدختی
nassertaleb@gmail.com
3
رییس مرکز محیط زیست و توسعه پایدار دانشگاه شیراز
LEAD_AUTHOR
Abbasi M, Abdoli MA, Omidvar, B., Baghvand, A., “Forecasting Municipal Solid Waste Generation by Hybrid Support Vector Machine and Partial Least Square Model”, International Journal of Environmental Research, winter 2013, Volume 7, Issue 1, 27-38.
1
Abdoli MA, Falah Nezhad M, Salehi Sede R, Behboudian S, “Long term Forecasting of Solid Waste Generation by the Artificial Neural Networks”, Environmental Progress & Sustainable Energy, December 2012, Volume 31, Issue 4, 628-636.
2
Antanasijević D, Pocajt V, Popović I, Redžić N, Ristić M, “The forecasting of municipal waste generation using artificial neural networks and sustainability indicators”, Sustainability Science, January 2013, Volume 8, Issue 1, 37-46.
3
Avci E, “Selecting of the optimal feature subset and kernel parameters in digital modulation classification by using hybrid genetic algorithm-support vector machines: HGASVM”, Expert Systems with Applications, March 2009, Volume 36, Issue 2, Part 1, 1391-1402.
4
Bach H, Mild A, Natter M, Weber A, “Combining Socio-demographic and logistic factors to explain the generation and collection of waste paper”, Resources, Conservation and Recycling, April 2004, Volume 41, Issue 1, 65-73.
5
Batinić B, Vukmirović S, Vujić G, Stanisavljević N, Ubavin D, Vukmirović G, “Using ANN model to determine future waste characteristics in order to achieve specific waste management targets -case study of Serbia”, Journal of Scientific and Industrial Research (JSIR), July 2011, 70(07), 513-518.
6
Bayar S, Demir I, Engin GO, “Modeling leaching behavior of solidified wastes using back-propagation neural networks”, Ecotoxicology and Environmental Safety, 2009, 72 (3), 843-850.
7
Bogner J, Matthews E, “Global methane emissions from landfills: new methodology and annual estimates 1980-1996”, Global Biogeochemical Cycles, June 2003, 17, NO. 2, 1-18.
8
Chang N B, Lin Y T, “An analysis of recycling impacts on solid waste generation by time series intervention modeling”, Resources, Conservation and Recycling, March 1997, Volume 19, Issue 3, 165-186.
9
Chen HW, Chang N B, “Prediction analysis of solid waste generation based on grey fuzzy dynamic modeling”, Resources, Conservation and Recycling, May 2000, Volume 29, Issues 1-2, 1-18.
10
Daskalopoulos E, Badr O, Probert SD, “Municipal solid waste: a prediction methodology for the generation rate and composition in the European Union countries and the United States of America”, Resources, Conservation and Recycling, November 1998, Volume 24, Issue 2, 155-166.
11
Dong C, Jin B, Li D, “Predicting the heating value of MSW with a feed forward neural network”, Waste Management, 2003, Volume 23, Issue 2, 103-106.
12
Dyson B, Chang NB, “Forecasting Municipal Solid Waste Generation in a Fast-Growing Urban Region with System Dynamics Modeling”, Waste Management, 2005, Volume 25, Issue 7, 669-679.
13
Hockett D, Lober DJ, Pilgrim K, “Determinants of per capita municipal solid waste generation in the Southeastern United States”, Journal of Environmental Management, November 1995, Volume 45, Issue 3, 205-217.
14
Jahandideh S, Asadabadi E, Askarian V, Movahedi MM, Hosseini S, Jahandideh M, “The use of artificial neural networks and multiple linear regression to predict rate of medical waste generation”, Waste Management, November 2009, Volume 29, Issue 11, 2874-2879.
15
Jenkins R R, “The Economics of Solid Waste Reduction: The Impact of User Fees (New Horizons in Environmental Economics)”, Elgar, Edward Publishing, Inc, 1 edition, 1993.
16
Kalogirou SA, “Artificial intelligence for the modeling and control of combustion processes: a review”, Progress in Energy and Combustion Science, 2003, Volume 29, Issue 6, 515-566.
17
Karaca F, Ozkaya B, “NN-LEAP: A neural network-based model for controlling leachate flow-rate in a municipal solid waste landfill site”, Environmental Modeling & Software, August 2006, Volume 21, Issue 8, 1190-1197.
18
Karavezyris V, Timpe KP, Marzi R, “Application of system dynamics and fuzzy logic to forecasting of municipal solid waste”, Mathematics and Computers in Simulation, September 2002, Volume 60, Issues 3-5, 149-158.
19
Mingers J, “An Empirical Comparison of Pruning Methods for Decision Tree Induction”, Machine Learning, 1989, 4(2), 227-243.
20
Navarro-Esbrí J, Diamadopoulos E, Ginestar D, “Time series analysis and forecasting techniques for municipal solid waste management”, Resources, Conservation and Recycling, May 2002, Volume 35, Issue 3, 201-214.
21
Noori R, Abdoli MA, Jalili Ghazizade M, Samieifard R, “Comparison of neural network and principal component-regression analysis to predict the solid waste generation in Tehran”, Iranian Journal of Public Health, 2009, Volume 38, Issue 1, 74-84.
22
Noori R, Karbassi A, Sabahi MS, “Evaluation of PCA and Gamma test techniques on ANN operation for weekly solid waste prediction”, Journal of Environmental Management, January-February 2010, Volume 91, Issue 3, 767-771.
23
Quinlan JR, “Learning with continuous classes”, in Proceedings, AI’92, 5th Australian Joint Conference on Artificial. Intelligence, Adams & Sterling (eds.), World Scientific, Singapore, 1992, 343-348.
24
Tchobanoglous G, Theisen H, Vigil SA, “Integrated Solid Waste Management: Engineering Principles and Management Issues”, New York: McGraw–Hill Book Co., Inc, 1993.
25
Vapnik V, “The Nature of Statistical Learning Theory (Information Science and Statistics)”, New York, NY: Springer-Verlag, 1 edition, January 1995.
26
Wang Y, Witten I, “Inducing model trees for continuous classes”, In Proceedings of the 9th European Conference on Machine Learning Poster Papers, Prague, 1997, 128-137.
27
Wanmg CM, Huang, Y. F., “Evolutionary- based feature selection approaches with new criteria for data mining: A case study of credit approval data”, Expert Systems with Applications, April 2009, Volume 36, Issue 3, Part 2, 5900-5908.
28
مینوسپهر م، ”مطالعات طرح جامع مدیریت پسماند شهرها و روستاهای ساحلی استان هرمزگان“، مهندسین مشاور عمران محیطزیست شهر سبز پارسیان، استانداری هرمزگان، 1394-1391 .
29
ORIGINAL_ARTICLE
بررسی آزمایشگاهی رفتار ستونهای بتنی غیرمسلح تقویت شده با شیوه نوین کاربرد ترکیبی ژاکتهای فولادی- پلیمری
در این مقاله شیوه نوین تقویت، محصورکنندگی ترکیبی با استفاده همزمان از عناصر فولادی مسلح کننده و الیاف FRP، به منظور تقویت ستونها و پایههای بتنی غیرمسلح پیشنهاد و کفایت آن با انجام مطالعه آزمایشگاهی مورد بررسی قرار گرفت. نمونههای استوانهای از بتن با مقاومت پایین ساخته شده و تحت بارگذاری فشاری در شرایط آزمایشگاهی، برخی مشخصههای مکانیکی از قبیل میزان جذب انرژی، تغییر شکل محوری، سختی اولیه و رفتار بار- تغییر شکل برای آنها تعیین گردید. دو نمونه تقویت نشده به عنوان نمونه معیار انتخاب شده و 18 نمونه دیگر با استفاده از روشهای مرسوم تقویت از قبیل دورپیچ کردن با CFRP، GFRP، دورپیچ کردن با استفاده همزمان پوشش FRP و میلگردهای فولادی نصب شده در سطح بتن (NSM) و در نهایت دو روش پیشنهادی در این تحقیق تقویت شدند. بر مبنای نتایج آزمایش مشخص گردید که با استفاده از شیوه تقویت پیشنهادی ظرفیت باربری فشاری، میزان جذب انرژی و تغییرشکل محوری نسبت به استفاده از سایر روشهای تقویت بهبود یافته، هرچند در میزان سختی الاستیک نمونهها افزایش ایجاد شده است. از روش تقویتی پیشنهاد شده میتوان برای تقویت برشی و خمشی ستونها و پایههای بتنی غیر مسلح پلهای جادهای و راهآهن استفاده کرد.
https://ceej.tabrizu.ac.ir/article_7585_8e34ec8a08c55296eaf12016b3f01efb.pdf
2018-05-22
77
88
10.22034/ceej.2018.7585
مقاوم سازی
ژاکتهای ترکیبی
مقاومت محوری
شکلپذیری
جذب انرژی
محمد رضا
نوری شیرازی
mrns1981@gmail.com
1
دانشگاه صنعتی سهند تبریز
AUTHOR
حسن
افشین
h_afshin@sut.ac.ir
2
دانشکده مهندسی عمران، دانشگاه صنعتی سهند تبریز
AUTHOR
کریم
عابدی
k_abedi@sut.ac.ir
3
دانشکده مهندسی عمران، دانشگاه صنعتی سهند
LEAD_AUTHOR
Ghobarah A, Biddah A, Mahgoub M, “Rehabilitation of reinforced concrete columns using corrugated steel jacketing”,Journal of Earthquake Engineering, 1997, 1 (4), 651-673.
1
Abdullah V, Katsuki T, “An investigation into the behavior and strength of reinforced concrete columns strengthened with ferrocement jackets”, Cement and Concrete Composites, 2003, 25 (2), 233-242.
2
Rahai A, Norouzi A, “Evaluation of the vulnerability and bridge improvement function”, Amirkabir University of Technology Publications, Iran, 2005, (in Farsi).
3
American Association State, “Standard test methods for tension testing of metallic materials”, Highway and Transportation Officials Standard, AASHTO, No. T68.
4
Bournas DA, Triantafillou TC, “Flexural strengthening of reinforced concrete columns with near-surface-mounted FRP or stainless steel”,ACI Structural Journal, 2009, 106 (4).
5
Choi DU, Thomas H, Kang K, Ha SS, Kim KH, Kim W, “Flexural and hybrid carbon-glass fiber-reinforced polymer sheets”,ACI Structural Journal, 2011, 108 (1).
6
Choi E, Rhee I, Park J, Cho BS, “Seismic retrofit of plain concrete piers of railroad bridges using composite of FRP-steel plates”, Composites - Part B, 2011, 42, 1097-1107.
7
Tang GG, Chen JF, Smith LM, “Strengthening of concrete structures with FRP sheets”, 2008.
8
Xiong GJ, Wu XY, Li FF, Yan Z, “Load carrying capacity and ductility of circular concrete columns confined by ferrocement including steel bars”, Construction and Building Materials, 2011, 25, 2263-2268.
9
Li G, “Experimental study of hybrid composite cylinders”, Composite Structures, 2007, 78, 170-181.
10
Lia J, Samali B, Ye L, Bakoss S, “Behaviour of concrete beam-column connections reinforced with hybrid FRP sheet”, Composite Structures, 2002, 57, 357-365.
11
Li J, Gong J, Wang L, “Seismic behavior of corrosion-damaged reinforced concrete columns strengthened using combined carbon fiber-reinforced polymer and steel”, Construction and Building Materials, 2009, 2653-2663.
12
Abedi K, Afshin H, Noori Shirazi MR, “Numerical study on the seismic retrofitting of reinforced concrete columns using rectified steel jackets”, Asian Journal of Civil Engineering (Building And Housing), 2010, 11 (2), 219-240.
13
Lam L, Teng JG, “Design-oriented stress–strain model for FRP-confined concrete”, Construction and Building Materials, 2003, 17 (6 & 7), 471-489.
14
Lu YY, Chen SX, Zhao GF, “An experimental study on the seismic behavior of reinforced concrete column strengthened with bonded steel hoops and carbon fiber reinforced polymer sheet”, China Civil Engineering Journal, 2005, 38 (8), 10-17.
15
Mirmiran A, Shahawy M, “Behavior of concrete columns confined by fibre composites”, Journal of Structural Engineering, 1999, 123 (5), 583-590.
16
Mirmiran A, Shahawy M, Samaan M, Echary HE, Mastrapa JC, Pico O, “Effect of column parameters on FRP-confined concrete”, Journal of Composites for Construction, 1998, 2 (4), 175-185.
17
Planning and Budget Organization, “National Building Regulations of Iran: Issue 9”, (in Farsi).
18
Sheikh SA, Yau G, “Seismic behavior of concrete columns confined with steel and fiber-reinforced polymers”, ACI Structural Journal, 2002, 99 (1), 72-80.
19
Vandoros KG, Dritsos SE, “Concrete jacket construction detail effectiveness when strengthening RC columns”, Construction and Building Materials, 2008, 22 (3), 264-276.
20
Zhishen W, Wenxiao L, Sakuma N, “Innovative externally bonded FRP/concrete hybrid flexural members”, Composite Structures, 2006, 72, 289-300.
21
ORIGINAL_ARTICLE
ارزیابی عملکرد شبکه توزیع آب اهر بعد از بلندمرتبهسازیهای مضاعف
هدف این مقاله تعیین تأثیر احداث ساختمانهای بلندمرتبه، خارج از مقررات طرح جامع شهری، بر عملکرد هیدرولیکی شبکه توزیع آب اهر است. برای این منظور، ابتدا مدل EPANET و الگوریتم جامعه مورچگان در محیط Matlab با هم تلفیق شدند. سپس با کمینه کردن اختلاف فشار مشاهداتی و محاسباتی در گرههای شبکه، ضرایب هیزن ویلیامز لولههای مدل شبکه تنظیم شد و بهترین مدل، برای ارزیابی عملکرد هیدرولیکی شبکه مورد استفاده قرار گرفت. برای مقایسه عملکرد هیدرولیکی شبکه از سه شاخص قابلیت اطمینان فازی، شاخص اطمینانپذیری فشار و شاخص اطمینانپذیری نیاز آبی استفاده شده است. مقایسه نتایج مدلها نشان میدهد که شبکه توزیع آب اهر بعد از ساخت و سازهای موجود از عملکرد مطلوبی برخودار است هر چند چون شبکه توزیع آب اهر قبل از ساخت و سازها با مشکل کمبود فشار در برخی مناطق مواجه بوده است، ساخت و سازهای انجام شده، این مشکل را تقویت نموده است. اما هنوز خللی در عملکرد هیدرولیکی، اکثر مناطق شهری ایجاد نکرده است. در صورتی که برنامه ساخت و سازها به شکل گذشته خود و خارج از طرحهای جامع شهری ادامه پیدا کنند به دلیل این که در کوچه و پس کوچههای شهر و در نقاط خاصی از شهر تمرکز یافته است، عملکرد هیدرولیکی شبکه را دچار مشکل خواهد نمود، به طوری که فشار در گره 42 از 6/31 متر به 7/21 متر و مقدار منطقهای شاخص قابلیت اطمینان فازی از 44/0 به 19/0 کاهش پیدا میکند.
https://ceej.tabrizu.ac.ir/article_7578_795d752ab07572729d12d1a860995d88.pdf
2018-05-22
89
100
10.22034/ceej.2018.7578
ساختمانهای بلندمرتبه
شبکه توزیع آب اهر
الگوریتم جامعه مورچگان
عملکرد هیدرولیکی
شاخص قابلیت اطمینان
مهدی
دینی
1
گروه مهندسی عمران، دانشگاه شهید مدنی آذربایجان
LEAD_AUTHOR
امینزاده ب، "معضلات افزایش تراکم در بافتهای فرسوده شهر"، اولین سمینار ساخت و ساز در پایتخت، دانشکده فنی دانشگاه تهران، بهمن، 1381.
1
بهرامپور ع، مدیری آ، "مطالعه رابطه میان رضایتمندی ساکنان از محیط زندگی و میزان حس تعلق آنها در مجتمع مسکونی بلندمرتبه شهرک کوثر تهران"، نشریه هنرهای زیبا معماری و شهرسازی، 1394، 20 (3)، 85-94.
2
جنوبی ا، "نگاهی تازه به مرمت بافتهای فرسوده درون شهری"، نخستین همایش ملی استحکام بخشی ساختمانهای بنایی غیر مسلح و بناهای تاریخی، شهرداری شیراز، شیراز، آذر، 1384.
3
رحیمی ر، نورتقانی عم، "گسیختگی معماری شهر و اتلاف انرژی"، پنجمین همایش بهینهسازی مصرف سوخت در ساختمان، سازمان بهینهسازی مصرف سوخت کشور، تهران، اردیبهشت، 1385.
4
رهبر د، "ضرورت ارزیابی اثرات زیستمحیطی تراکم و بلندمرتبهسازی در تهران"، اولین سمینار ساخت و ساز در پایتخت، دانشکده فنی دانشگاه تهران، بهمن، 1381.
5
زینلی ا، شناسایی نقش مؤلفههای طبیعی در ایجاد هویت شهری (نمونه موردی: شهر بابک)، دوفصلنامه پژوهشهای منظر شهر، 1394، 2(4)، 7-18.
6
دینی م، عزیزی ع، "تأثیر بلندمرتبه سازی بر عملکرد شبکههای توزیع آب شهری"، اولین کنفرانس ملی عمران و توسع، دانشگاه آزاد اسلامی لشتنشا، زیباکنار، اسفند 1390.
7
دینی م، عزیزی ع، "تأثیر ساخت و سازهای ناسازگار بر عملکرد هیدرولیکی شبکه توزیع آب"، هشتمین کنگره ملی مهندسی عمران، دانشکده مهندسی عمران، بابل، اردیبهشت 1393.
8
دینی م، "بررسی تأثیر بلندمرتبهسازیهای خارج از مقررات طرح جامع در شهر اهر، فصلنامه علمی- پژوهشی فضای جغرافیایی، 1394، 12 (37)، 52-64.
9
شریعتمداری د، بنیانی م، "اهداف توسعه پایدار در ساخت و ساز، ششمین همایش مقررات ملی ساختمان"، دبیرخانه دائمی مقررات ملی ساختمان، شیراز، اسفند، 1393.
10
فاضلی عر، حیدری ش، "بهینه سازی مصرف انرژی در مناطق مسکونی شهر تهران با استفاده از رویکرد برنامهریزی انرژی روتردام (REAP)"، مجله پژوهشهای برنامهریزی و سیاستگذاری انرژی، 1392، 1(3)، 83-96.
11
فرد س، زعیم دار س، "معماری سنتی با توجه به ساخت و ساز پایدار، نمونه موردی: شهرستان مهاباد"، اولین کنفرانس بینالملی سکونتگاههای سنتی زاگرس، دانشگاه کردستان، سنندج، اردیبهشت 1387.
12
قاجارنیا ن، "طراحی و توسعه پویای چند معیاره شبکههای توزیع آب شهری"، پایاننامه کارشناسی ارشد مدیریت منابع آب، دانشکده مهندسی و فناوری کشاورزی پردیس کشاورزی و منابع طبیعی دانشگاه تهران، 1388.
13
مرادی ع، کاشفیپور سم، سلیمی آ، فرشاد ر، "ضرورت بازنگری در برخی از مبانی الگوی تقاضا در طراحی شبکههای توزیع آب"، همایش ملی الگوهای توسعه پایدار در مدیریت آب، شرکت مهندسین مشاور مهاب ثامن، مشهد، اسفند، 1388.
14
محمودی م، "نقش ضوابط و مقررات شهرسازی در بهینهسازی مصرف سوخت در ساختمان"، دومین همایش بهینهسازی مصرف سوخت در ساختمان، سازمان بهینهسازی مصرف سوخت کشور، تهران، اسفند، 1381.
15
مهرجو م، آفریدی ص، "بررسی رشد شهرنشینی بر روند خاطرهزدایی و هویت شهری در شهرهای معاصر ایران (محله عودلاجان تهران)"، همایش ملی معماری و شهرسازی معاصر ایران، دانشگاه آزاد اسلامی واحد بیضا، شیراز، فروردین 1389.
16
نوریان ف، سلیمانیراد م، حبیبی ک، "طراحی شهری و مداخله تاریخی دربافت قدیم شهر همدان"، اولین کنفرانس بینالملی سکونتگاههای سنتی زاگرس، دانشگاه کردستان، سنندج، اردیبهشت، 1387.
17
Borzi A, Gerbino E, Bovis S, Corradini M, “Genetic algorithms for water distribution network calibration: A real application”, Proceedings of the 8th International Conference on Computing and Control for the Water Industry, University of Exeter, UK, 2005.
18
Carrijo IB, Reis LFR, Walters GA, Savic DA, “Operational optimization of WDS based on multi objective genetic algorithms and operational extraction rules using data Mining”, Proceedings of World Water and Environmental Resources Congress. Salt Lake City. Utah. USA, June 27-July 1, 2004.
19
Dini M, Tabesh M, “Hydraulic calibration of water distribution networks based on ACO algorithms”, second conference on smart monitoring, Assessment and Rehabilitation of Civil Structures. Istanbul, Turkey. 9-11 September, 2013.
20
Dini M, Tabesh M, “A New Method for Simultaneous Calibration of Demand Pattern and Hazen-Williams Coefficients in Water Distribution Systems”, Journal of Water Resources Management, 2014, 28, 2021-2034.
21
Dorigo M, Maniezzo V, Colorni A, “The ant system: Optimisation by a colony of cooperating agents”, IEEE Transactions on Systems, Part B: Cybern, 1996, 26 (1), 29-41.
22
Ormsbee LE, Wood DJ, “Explicit pipe network calibration”, Journal of Water Resources planning and Management, ASCE, 1986, 112 (2), 166-182.
23
Prasad TD, Park NS, “Multiobjective genetic algorithm for design of water distribution networks”, Journal of Water Resources Planning and Management, 2004, 130 (1), 73-82.
24
Rossman LA, “EPANET2: user’s manual”, U.S. Environmental Protection Agency, Risk Reduction Engineering Laboratory, Cincinnati, Ohio, 2000.
25
Tabesh M, Jamasb M, Moeini R, “Calibration of water distribution hydraulic models considering different decision variables and consumption scenarios”, Journal of Hydraulics, Iranian Hydraulic Association (in Persian), 2010, 4 (3), 69-78,
26
Tabesh M, Jamasb B, Moeini R, “Calibration of water distribution hydraulic models: A comparison between pressure dependent and demand driven analyses”, Urban Water Journal, 2011, 8 (2), 93-102.
27
Yu G, Powell RS, “Optimal design of meter placement in water distribution systems”, International Journal of Systematic Science, 1994, 25 (12), 2155-2166.
28
ORIGINAL_ARTICLE
بهسازی سطحی خاکهای سیلتی با تغییر دانهبندی مصالح و ارائه طرح اختلاط بهینه
امروزه در زمینه بهسازی خاک تحقیقات گستردهای صورت گرفته است. در اکثر این تحقیقات از یک افزودنی مانند سیمان یا آهک به منظور بهبود خواص مقاومتی خاک بهره گرفته شده است. در این تحقیق با توجه به مشخصات ضعیف مصالح موجود در سایت، سعی شده است با تغییر دانهبندی مصالح، مقاومت مورد نیاز خاک تأمین گردد. بدین منظور با استفاده از روش تاگوچی طرح اختلاطهای مختلفی تعیین گردید که در مجموع 25 حالت مختلف مشخص شد. برای تعیین پارامترهای مقاومتی خاک در این حالتها 75 آزمایش برش مستقیم بزرگ 30×30 سانتیمتر انجام گرفته است. در ادامه با استفاده از روش تاگوچی طرح اختلاط بهینه به دست آمده و ظرفیت باربری در دو شرایط اولیه خاک و طرح اختلاط بهینه تعیین گردیده و تأثیر درصد ترکیبات مصالح مختلف مورد ارزیابی قرار گرفته است. در نهایت طرح اختلاط به دست آمده جهت اجرا در پروژه، ارائه گردیده و در منطقه صنعتی اراک در زمینی به مساحت 100000 مترمربع به اجرا رسیده است.
https://ceej.tabrizu.ac.ir/article_7586_5c337d15bb738b953cad51acfee2e2ae.pdf
2018-05-22
103
108
10.22034/ceej.2018.7586
بهسازی سطحی خاک
روش تاگوچی
آزمایش برش مستقیم
احمدرضا
مظاهری
a.mazaheri@abru.ac.ir
1
دانشکده فنی و مهندسی، دانشگاه آیتالله العظمی بروجردی
LEAD_AUTHOR
مسعود
پاکنهاد
masoudpaknahad@gmail.com
2
گروه مهندسی عمران، مرکز اموزش عالی محلات
AUTHOR
محمد
ترکمن
turkaman.mohamad@gmail.com
3
دانشگاه آزاد اسلامی، واحد خمین
AUTHOR
Ardalan H, Eslami A, Zadeh NN, “Piles shaft capacity from CPT and CPTu data by polynomial neural networks and genetic algorithms”, Computer and Geotechnic, 2014, 55, 132-40.
1
Barari A, Ibsen LB, “Undrained response of bucket foundations to moment loading”, Applied Ocean Research, 2012, 36, 12-21.
2
Carasca O, “Soil improvement by mixing: techniques and performances”, Oana Carașca. Energy Procedia 85, 2016, 85-92
3
Das SK, Basudhar PK, “Prediction of residual friction angle of clays using artificial neural network”, Engineering Geology, 2008, 100(3-4), 142-5.
4
Das SK, Basudhar PK, “Undrained lateral load capacity of piles in clay using artificial neural network”, Computer and Geotechnics, 2006, 33(8), 454-9.
5
Das SK, Samui P, Sabat AK, “Application of Artificial Intelligence to Maximum Dry Density and Unconfined Compressive Strength of Cement Stabilized Soil”, Geotechnical and Geological Engineering, 2011, 29, 329-42.
6
Estabragh AR, Naseh M, Javadi A, “Improvement of clay soil by electro-osmosis technique”, Applied Clay Science, 2014.
7
Feng ZY, Sutter K, “Dynamic properties of granulated rubber/sand mixtures”, Geotechics Test Journal, 2000, 23(3), 338-44.
8
Ferreira PMV, Bica AVD, “Problems in identifying the effects of structure and critical state in a soil with a transitional behavior”, Géotechnique, 2006, 56 (7), 445-54.
9
Firatcabalar A, Sulaiman Mustafa W, “Fall Cone tests on Clay-sand Mixture”, 2015.
10
Gullu H, “Prediction of peak ground acceleration by genetic expression programming and regression: A comparison using likelihood-based measure”, Engineering Geology
11
2012, 141–142, 92-113.
12
Hsiao D, Phan V, Hsieh Y, Kuo H, “Engineering Behavior and Correlated parameters from obtained results of Sand-silt Mixtures”, 2015.
13
Ishihara K, Koseki J, “Discussion on the cyclic shear strength of fines-containing sands”, Earthquake geotechnical engineering. In: Proceedings of the 11th international conference on Soil Mechanics and Foundation Engineering, Rio De Janiero, Brazil, 1989, 101-6.
14
Jones CJFP, Lamont-Black J, Glendinning S, Electro kinetic geosynthetics in hydraulic applications. Geotextiles and Geomembranes Journal, 2011, 29, 381-390.
15
Karunaratne GP, Prefabricated and electrical vertical drains for consolidation of soft clay, Geotext, Geomembr, 2011, 29, 391-401. Kim H, Santamarina J, “Sand-rubber mixtures (large rubber chips)”, Canadian Geotechnical Journal. 2008, 45, 1457-65.
16
Kim H, Spatial Variability in soils: Stiffness and strength (Ph.D. dissertation), Atlanta, Georgia Institute of Technology; 2005.
17
Kim U, Kim D, Zhuang L, “Influence of fines content on the undrained cyclic strength of sand-clay mixtures”, Soil Dynamics and Earthquake Engineering, 2016, 83, 124-134
18
Martins FB, Bressani LA, Coop MR, Bica AVD, Some aspects of the compressibility behaviour of a clayey sand, Canadian Geotechics Journal 2001, 38, 1177-86.
19
Mozumder RA, Laskar AI, Prediction of unconfined compressive strength of geopolymer stabilized clayey soil using Artificial Neural Network
20
Najjar YM, Huang C. Simulating the stress–strain behavior of Georgia kaolinvia recurrent neuronet approach. Computer and Geotechnic, 2007, 34, 346-61.
21
Nocilla A, Coop MR, Colleselli F, “The Mechanics of an Italian silt: an example of ‘transitional’ behavior”, Géotechnique 2006, 56(4), 261-71.
22
Pamukcu S, Akbulut S, “Thermo elasticenhan cement of damping of sand using synthetic ground rubber”, Journal of Geotechnical and Geoenvironmental Engineering, 2006, 132(4), 501-10.
23
Park SS, Kim YS, Liquefaction resistance of sands containing plastic fines with different plasticity, Journal of Geotechnical and Geo environmental Engineering, 2013, 139, 825-30.
24
Tahmasebipoor A, Barari A, Behnia M, Najafi T, “Determination of the ultimate limit states of shallow foundations using gene expression programming (GEP) approach”, Soils and Foundations,2015, 55(3), 650-659
25
Terzaghi K, "Theoretical Soil Mechanics”, John Wiley & Sons, 1943, New York.
26